Failed
gprs:trx-b200+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=13799): Process ended prematurely: osmo-stp_10.42.42.5(pid=13799) [trial-2396↪gprs:trx-b200+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13799)]
Standard Output
---------------------------------------------- trial-2396 gprs:trx-b200+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 23:37:14.178281 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:37:14.189775 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 23:37:14.346175 tst iperf3.py: using LAC 37015 23:37:14.462401 tst iperf3.py: using RAC 40 23:37:14.578992 tst iperf3.py: using CellId 37015 23:37:14.695318 tst iperf3.py: using BVCI 37016 23:37:14.718024 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:37:14.728698 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:37:14.739267 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:37:14.749862 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:37:14.760841 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:37:14.771895 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:37:14.782975 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:37:14.793697 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:37:14.804511 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:37:15.079450 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 23:37:15.204181 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:37:15.512740 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13791): Launched 23:37:15.768504 run iperf3-srv_10.42.42.10(pid=13792): Launched 23:37:15.963954 tst iperf3.py:8: start network... 23:37:16.091516 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:37:16.609065 run create_hlr_db(pid=13793): Launched 23:37:16.783756 bus /gobi_6: Setting Powered False 23:37:17.803441 run create_hlr_db(pid=13793): Terminated: ok {rc=0} 23:37:18.226516 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13795): Launched 23:37:18.545706 run osmo-hlr_10.42.42.2(pid=13796): Launched 23:37:18.667438 run osmo-stp_10.42.42.5: Starting osmo-stp 23:37:19.221366 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13798): Launched 23:37:19.539770 run osmo-stp_10.42.42.5(pid=13799): Launched 23:37:19.656185 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:37:20.213403 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13802): Launched 23:37:20.327328 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:37:20.604353 run patchelf(pid=13803): Launched 23:37:20.790930 run osmo-stp_10.42.42.5(pid=13799): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:trx-b200+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13799)] 23:37:20.927757 run osmo-stp_10.42.42.5(pid=13799): stdout: | (launched: 2022-12-13_23:37:19.383655) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:37:21.065603 run osmo-stp_10.42.42.5(pid=13799): stderr: | �[0;m�[38;5;43m20221213233719576 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213233719576 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213233719576 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213233719577 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213233719577 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213233719577 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213233719577 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:37:21.197616 run osmo-stp_10.42.42.5(pid=13799): stdout: | (launched: 2022-12-13_23:37:19.383655) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:37:21.328671 run osmo-stp_10.42.42.5(pid=13799): stderr: | �[0;m�[38;5;43m20221213233719576 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213233719576 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213233719576 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213233719577 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213233719577 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213233719577 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213233719577 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:37:21.481926 run patchelf(pid=13803): Terminating (SIGINT) 23:37:21.661547 run patchelf(pid=13803): Terminated: ok {rc=0} 23:37:21.694392 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=13799): Process ended prematurely: osmo-stp_10.42.42.5(pid=13799) [trial-2396↪gprs:trx-b200+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13799)] [trial-2396↪gprs:trx-b200+mod-bts0-dynts-osmo↪iperf3.py:8] 23:37:21.704253 tst iperf3.py:8: Test FAILED (7.6 sec) 23:37:21.767938 run osmo-hlr_10.42.42.2(pid=13796): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:trx-b200+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13796)] 23:37:21.819477 run osmo-hlr_10.42.42.2(pid=13796): stdout: | (launched: 2022-12-13_23:37:18.388923) 23:37:21.871866 run osmo-hlr_10.42.42.2(pid=13796): stderr: | �[0;m�[1;31m20221213233718586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213233718586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213233718586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213233718586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213233718586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213233718586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213233718598 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-b200+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213233718606 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213233718606 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213233718606 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:37:21.916502 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13791): Terminating (SIGTERM) 23:37:21.959227 run iperf3-srv_10.42.42.10(pid=13792): Terminating (SIGTERM) 23:37:22.001951 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13795): Terminating (SIGTERM) 23:37:22.044500 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13798): Terminating (SIGTERM) 23:37:22.087251 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13802): Terminating (SIGTERM) 23:37:22.096908 --- ParallelTerminationStrategy: PID 13791 died... 23:37:22.153282 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13791): Terminated: ok {rc=0} 23:37:22.163216 --- ParallelTerminationStrategy: PID 13792 died... 23:37:22.218855 run iperf3-srv_10.42.42.10(pid=13792): Terminated {rc=256} 23:37:22.228734 --- ParallelTerminationStrategy: PID 13795 died... 23:37:22.284673 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13795): Terminated: ok {rc=0} 23:37:22.294678 --- ParallelTerminationStrategy: PID 13798 died... 23:37:22.350611 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13798): Terminated: ok {rc=0} 23:37:22.360593 --- ParallelTerminationStrategy: PID 13802 died... 23:37:22.416403 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13802): Terminated: ok {rc=0} 23:37:22.503360 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13799): Process ended prematurely: osmo-stp_10.42.42.5(pid=13799) [trial-2396↪gprs:trx-b200+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13799)]