Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.ping.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=14651): Process ended prematurely: osmo-stp_10.42.42.5(pid=14651) [trial-2396↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14651)]
Standard Output
---------------------------------------------- trial-2396 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 23:45:32.353341 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:45:32.364878 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 23:45:32.520822 tst ping.py: using LAC 37059 23:45:32.645313 tst ping.py: using RAC 84 23:45:32.769576 tst ping.py: using CellId 37059 23:45:32.896798 tst ping.py: using BVCI 37060 23:45:32.921051 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:45:32.932684 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:45:32.944185 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:45:32.955708 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:45:32.967914 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:45:32.980157 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:45:32.992817 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:45:33.004939 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 23:45:33.278222 tst ping.py:19: start network... 23:45:33.399427 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:45:33.865936 run create_hlr_db(pid=14645): Launched 23:45:34.035556 bus /gobi_6: Setting Powered False 23:45:35.054838 run create_hlr_db(pid=14645): Terminated: ok {rc=0} 23:45:35.469487 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14647): Launched 23:45:35.780413 run osmo-hlr_10.42.42.2(pid=14648): Launched 23:45:35.897119 run osmo-stp_10.42.42.5: Starting osmo-stp 23:45:36.439766 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14650): Launched 23:45:36.750219 run osmo-stp_10.42.42.5(pid=14651): Launched 23:45:36.863568 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:45:37.406032 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14653): Launched 23:45:37.517386 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:45:37.788589 run patchelf(pid=14654): Launched 23:45:37.971235 run osmo-stp_10.42.42.5(pid=14651): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14651)] 23:45:38.105371 run osmo-stp_10.42.42.5(pid=14651): stdout: | (launched: 2022-12-13_23:45:36.597904) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:45:38.239226 run osmo-stp_10.42.42.5(pid=14651): stderr: | �[0;m�[38;5;43m20221213234536787 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213234536787 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213234536788 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213234536788 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213234536789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213234536789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213234536789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:45:38.369878 run osmo-stp_10.42.42.5(pid=14651): stdout: | (launched: 2022-12-13_23:45:36.597904) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:45:38.498228 run osmo-stp_10.42.42.5(pid=14651): stderr: | �[0;m�[38;5;43m20221213234536787 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213234536787 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213234536788 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213234536788 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213234536789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213234536789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213234536789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:45:38.647498 run patchelf(pid=14654): Terminating (SIGINT) 23:45:38.823022 run patchelf(pid=14654): Terminated: ok {rc=0} 23:45:38.855082 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=14651): Process ended prematurely: osmo-stp_10.42.42.5(pid=14651) [trial-2396↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14651)] [trial-2396↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22] 23:45:38.864032 tst ping.py:22: Test FAILED (6.5 sec) 23:45:38.926949 run osmo-hlr_10.42.42.2(pid=14648): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14648)] 23:45:38.978426 run osmo-hlr_10.42.42.2(pid=14648): stdout: | (launched: 2022-12-13_23:45:35.627744) 23:45:39.030439 run osmo-hlr_10.42.42.2(pid=14648): stderr: | �[0;m�[1;31m20221213234535823 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213234535823 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213234535823 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213234535823 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213234535823 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213234535823 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213234535835 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213234535844 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213234535844 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213234535844 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:45:39.074778 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14647): Terminating (SIGTERM) 23:45:39.117020 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14650): Terminating (SIGTERM) 23:45:39.159253 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14653): Terminating (SIGTERM) 23:45:39.169094 --- ParallelTerminationStrategy: PID 14647 died... 23:45:39.225949 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14647): Terminated: ok {rc=0} 23:45:39.236162 --- ParallelTerminationStrategy: PID 14650 died... 23:45:39.292777 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14650): Terminated: ok {rc=0} 23:45:39.303036 --- ParallelTerminationStrategy: PID 14653 died... 23:45:39.359647 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14653): Terminated: ok {rc=0} 23:45:39.446004 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14651): Process ended prematurely: osmo-stp_10.42.42.5(pid=14651) [trial-2396↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14651)]