Failed
gprs:nanobts+band-900+mod-bts0-egprs.iperf3.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=25934): Process ended prematurely: osmo-stp_10.42.42.5(pid=25934) [trial-2397↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25934)]
Standard Output
---------------------------------------------- trial-2397 gprs:nanobts+band-900+mod-bts0-egprs iperf3.py ---------------------------------------------- 01:51:10.067710 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:51:10.079789 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 01:51:10.228282 tst iperf3.py: using LAC 37717 01:51:10.356363 tst iperf3.py: using RAC 232 01:51:10.478160 tst iperf3.py: using CellId 37717 01:51:10.597313 tst iperf3.py: using BVCI 37718 01:51:10.621088 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:51:10.632361 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:51:10.643471 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:51:10.654550 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:51:10.666075 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:51:10.677584 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:51:10.689147 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:51:10.700593 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:51:10.712278 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:51:11.006863 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 01:51:11.143326 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:51:11.483904 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25926): Launched 01:51:11.767048 run iperf3-srv_10.42.42.10(pid=25927): Launched 01:51:11.966897 tst iperf3.py:8: start network... 01:51:12.104202 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:51:12.618886 run create_hlr_db(pid=25928): Launched 01:51:12.808711 bus /gobi_6: Setting Powered False 01:51:13.827698 run create_hlr_db(pid=25928): Terminated: ok {rc=0} 01:51:14.238396 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25930): Launched 01:51:14.542623 run osmo-hlr_10.42.42.2(pid=25931): Launched 01:51:14.654933 run osmo-stp_10.42.42.5: Starting osmo-stp 01:51:15.185598 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25933): Launched 01:51:15.489844 run osmo-stp_10.42.42.5(pid=25934): Launched 01:51:15.601831 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:51:16.203177 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25936): Launched 01:51:16.332274 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:51:16.620478 run patchelf(pid=25937): Launched 01:51:16.804119 run osmo-stp_10.42.42.5(pid=25934): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25934)] 01:51:16.938510 run osmo-stp_10.42.42.5(pid=25934): stdout: | (launched: 2022-12-14_01:51:15.339307) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:51:17.074850 run osmo-stp_10.42.42.5(pid=25934): stderr: | �[0;m�[38;5;43m20221214015115507 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214015115507 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214015115507 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214015115507 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214015115508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214015115508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214015115508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:51:17.204104 run osmo-stp_10.42.42.5(pid=25934): stdout: | (launched: 2022-12-14_01:51:15.339307) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:51:17.329479 run osmo-stp_10.42.42.5(pid=25934): stderr: | �[0;m�[38;5;43m20221214015115507 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214015115507 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214015115507 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214015115507 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214015115508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214015115508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214015115508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:51:17.474936 run patchelf(pid=25937): Terminating (SIGINT) 01:51:17.646091 run patchelf(pid=25937): Terminated: ok {rc=0} 01:51:17.677893 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=25934): Process ended prematurely: osmo-stp_10.42.42.5(pid=25934) [trial-2397↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25934)] [trial-2397↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8] 01:51:17.687446 tst iperf3.py:8: Test FAILED (7.7 sec) 01:51:17.747377 run osmo-hlr_10.42.42.2(pid=25931): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25931)] 01:51:17.795860 run osmo-hlr_10.42.42.2(pid=25931): stdout: | (launched: 2022-12-14_01:51:14.392316) 01:51:17.845015 run osmo-hlr_10.42.42.2(pid=25931): stderr: | �[0;m�[1;31m20221214015114564 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214015114564 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214015114564 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214015114565 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214015114565 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214015114565 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214015114577 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:nanobts+band-900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214015114586 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214015114586 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214015114586 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:51:17.886627 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25926): Terminating (SIGTERM) 01:51:17.926293 run iperf3-srv_10.42.42.10(pid=25927): Terminating (SIGTERM) 01:51:17.965197 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25930): Terminating (SIGTERM) 01:51:18.003905 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25933): Terminating (SIGTERM) 01:51:18.042973 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25936): Terminating (SIGTERM) 01:51:18.052199 --- ParallelTerminationStrategy: PID 25926 died... 01:51:18.105092 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25926): Terminated: ok {rc=0} 01:51:18.114783 --- ParallelTerminationStrategy: PID 25927 died... 01:51:18.167657 run iperf3-srv_10.42.42.10(pid=25927): Terminated {rc=256} 01:51:18.177395 --- ParallelTerminationStrategy: PID 25930 died... 01:51:18.230358 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25930): Terminated: ok {rc=0} 01:51:18.239928 --- ParallelTerminationStrategy: PID 25933 died... 01:51:18.293196 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25933): Terminated: ok {rc=0} 01:51:18.302928 --- ParallelTerminationStrategy: PID 25936 died... 01:51:18.356013 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25936): Terminated: ok {rc=0} 01:51:18.441018 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25934): Process ended prematurely: osmo-stp_10.42.42.5(pid=25934) [trial-2397↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25934)]