Failed

gprs:trx-umtrx+mod-bts0-egprs.ping.py (from gprs_trx-umtrx+mod-bts0-egprs)

Failing for the past 259 builds (Since #2139 )

Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=23309): Process ended prematurely: osmo-stp_10.42.42.5(pid=23309) [trial-2397↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23309)]

Standard Output

----------------------------------------------
trial-2397 gprs:trx-umtrx+mod-bts0-egprs ping.py
----------------------------------------------
01:21:33.627536 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:21:33.639698 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1)
01:21:33.783347 tst                          ping.py: using LAC 37559
01:21:33.904624 tst                          ping.py: using RAC 74
01:21:34.024460 tst                          ping.py: using CellId 37559
01:21:34.146896 tst                          ping.py: using BVCI 37560
01:21:34.169770 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:21:34.180585 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:21:34.191669 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:21:34.202637 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:21:34.213937 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:21:34.225488 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:21:34.237027 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:21:34.248344 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4)
01:21:34.539212 tst                       ping.py:19: start network...
01:21:34.672309 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:21:35.178038 run         create_hlr_db(pid=23303): Launched
01:21:35.364719 bus                          /gobi_6: Setting Powered False
01:21:36.384514 run         create_hlr_db(pid=23303): Terminated: ok {rc=0}
01:21:36.788409 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23305): Launched
01:21:37.085196 run   osmo-hlr_10.42.42.2(pid=23306): Launched
01:21:37.203274 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:21:37.729862 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23308): Launched
01:21:38.025406 run   osmo-stp_10.42.42.5(pid=23309): Launched
01:21:38.131650 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:21:38.647957 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23311): Launched
01:21:38.753277 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:21:39.011811 run              patchelf(pid=23312): Launched
01:21:39.185390 run   osmo-stp_10.42.42.5(pid=23309): ERR: Terminated: ERROR {rc=1}  [trial-2397↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23309)]
01:21:39.312290 run   osmo-stp_10.42.42.5(pid=23309): stdout: 
| (launched: 2022-12-14_01:21:37.879121)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:21:39.439855 run   osmo-stp_10.42.42.5(pid=23309): stderr: 
| �[0;m�[38;5;43m20221214012138044 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214012138044 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214012138045 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214012138045 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214012138046 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214012138046 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214012138046 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:21:39.562581 run   osmo-stp_10.42.42.5(pid=23309): stdout: 
| (launched: 2022-12-14_01:21:37.879121)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:21:39.684071 run   osmo-stp_10.42.42.5(pid=23309): stderr: 
| �[0;m�[38;5;43m20221214012138044 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214012138044 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214012138045 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214012138045 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214012138046 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214012138046 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214012138046 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:21:39.825429 run              patchelf(pid=23312): Terminating (SIGINT)
01:21:39.990978 run              patchelf(pid=23312): Terminated: ok {rc=0}
01:21:40.021775 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=23309): Process ended prematurely: osmo-stp_10.42.42.5(pid=23309) [trial-2397↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23309)]  [trial-2397↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22]
01:21:40.030655 tst                       ping.py:22: Test FAILED (6.4 sec)
01:21:40.089942 run   osmo-hlr_10.42.42.2(pid=23306): ERR: Terminated: ERROR {rc=237}  [trial-2397↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23306)]
01:21:40.138284 run   osmo-hlr_10.42.42.2(pid=23306): stdout: 
| (launched: 2022-12-14_01:21:36.938971) 
01:21:40.187163 run   osmo-hlr_10.42.42.2(pid=23306): stderr: 
| �[0;m�[1;31m20221214012137110 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214012137110 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214012137110 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214012137110 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214012137110 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214012137110 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214012137123 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:trx-umtrx+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214012137131 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214012137132 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214012137132 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:21:40.228764 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23305): Terminating (SIGTERM)
01:21:40.268156 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23308): Terminating (SIGTERM)
01:21:40.307621 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23311): Terminating (SIGTERM)
01:21:40.316892 ---      ParallelTerminationStrategy: PID 23305 died...
01:21:40.370017 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23305): Terminated: ok {rc=0}
01:21:40.379604 ---      ParallelTerminationStrategy: PID 23308 died...
01:21:40.432140 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23308): Terminated: ok {rc=0}
01:21:40.441820 ---      ParallelTerminationStrategy: PID 23311 died...
01:21:40.493798 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23311): Terminated: ok {rc=0}
01:21:40.576560 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23309): Process ended prematurely: osmo-stp_10.42.42.5(pid=23309) [trial-2397↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23309)]