Failed
gprs:oc2g+mod-bts0-dynts-ipa.ping.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=21314): Process ended prematurely: osmo-stp_10.42.42.5(pid=21314) [trial-2397↪gprs:oc2g+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21314)]
Standard Output
---------------------------------------------- trial-2397 gprs:oc2g+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 00:56:48.657633 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:48.669928 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 00:56:48.825253 tst ping.py: using LAC 37427 00:56:48.951424 tst ping.py: using RAC 197 00:56:49.077773 tst ping.py: using CellId 37427 00:56:49.205717 tst ping.py: using BVCI 37428 00:56:49.230604 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:49.242264 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:49.253454 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:49.264810 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:49.276283 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:49.287922 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:49.299762 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:49.311433 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:56:49.589490 tst ping.py:19: start network... 00:56:49.715082 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:56:50.199864 run create_hlr_db(pid=21308): Launched 00:56:50.373784 bus /gobi_6: Setting Powered False 00:56:51.395295 run create_hlr_db(pid=21308): Terminated: ok {rc=0} 00:56:51.798913 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21310): Launched 00:56:52.100747 run osmo-hlr_10.42.42.2(pid=21311): Launched 00:56:52.210178 run osmo-stp_10.42.42.5: Starting osmo-stp 00:56:52.736715 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21313): Launched 00:56:53.038379 run osmo-stp_10.42.42.5(pid=21314): Launched 00:56:53.147627 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:56:53.677304 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21316): Launched 00:56:53.783721 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:56:54.046252 run patchelf(pid=21317): Launched 00:56:54.223204 run osmo-stp_10.42.42.5(pid=21314): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:oc2g+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21314)] 00:56:54.352571 run osmo-stp_10.42.42.5(pid=21314): stdout: | (launched: 2022-12-14_00:56:52.889561) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:56:54.482274 run osmo-stp_10.42.42.5(pid=21314): stderr: | �[0;m�[38;5;43m20221214005653059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214005653059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214005653060 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214005653060 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214005653061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214005653061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214005653061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:56:54.606924 run osmo-stp_10.42.42.5(pid=21314): stdout: | (launched: 2022-12-14_00:56:52.889561) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:56:54.730168 run osmo-stp_10.42.42.5(pid=21314): stderr: | �[0;m�[38;5;43m20221214005653059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214005653059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214005653060 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214005653060 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214005653061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214005653061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214005653061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:56:54.875151 run patchelf(pid=21317): Terminating (SIGINT) 00:56:55.043442 run patchelf(pid=21317): Terminated: ok {rc=0} 00:56:55.074679 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=21314): Process ended prematurely: osmo-stp_10.42.42.5(pid=21314) [trial-2397↪gprs:oc2g+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21314)] [trial-2397↪gprs:oc2g+mod-bts0-dynts-ipa↪ping.py:22] 00:56:55.083457 tst ping.py:22: Test FAILED (6.4 sec) 00:56:55.143637 run osmo-hlr_10.42.42.2(pid=21311): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:oc2g+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21311)] 00:56:55.192915 run osmo-hlr_10.42.42.2(pid=21311): stdout: | (launched: 2022-12-14_00:56:51.952221) 00:56:55.242975 run osmo-hlr_10.42.42.2(pid=21311): stderr: | �[0;m�[1;31m20221214005652130 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214005652130 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214005652130 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214005652130 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214005652130 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214005652130 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214005652159 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:oc2g+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214005652168 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214005652169 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214005652169 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:56:55.285532 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21310): Terminating (SIGTERM) 00:56:55.325675 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21313): Terminating (SIGTERM) 00:56:55.365969 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21316): Terminating (SIGTERM) 00:56:55.375212 --- ParallelTerminationStrategy: PID 21310 died... 00:56:55.428838 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21310): Terminated: ok {rc=0} 00:56:55.438431 --- ParallelTerminationStrategy: PID 21313 died... 00:56:55.491574 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21313): Terminated: ok {rc=0} 00:56:55.501155 --- ParallelTerminationStrategy: PID 21316 died... 00:56:55.554453 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21316): Terminated: ok {rc=0} 00:56:55.642609 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21314): Process ended prematurely: osmo-stp_10.42.42.5(pid=21314) [trial-2397↪gprs:oc2g+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21314)]