Failed
gprs:oc2g+mod-bts0-dynts-ipa.iperf3.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=29032): Process ended prematurely: osmo-stp_10.42.42.5(pid=29032) [trial-2398↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29032)]
Standard Output
---------------------------------------------- trial-2398 gprs:oc2g+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 02:23:34.667926 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:34.679256 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 02:23:34.825149 tst iperf3.py: using LAC 37886 02:23:34.951523 tst iperf3.py: using RAC 146 02:23:35.080014 tst iperf3.py: using CellId 37886 02:23:35.206610 tst iperf3.py: using BVCI 37887 02:23:35.231367 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:35.242635 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:35.253530 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:35.264427 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:35.276161 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:35.287949 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:35.300005 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:35.311801 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:35.323750 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 02:23:35.600067 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 02:23:35.724000 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:23:36.033664 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29024): Launched 02:23:36.293095 run iperf3-srv_10.42.42.10(pid=29025): Launched 02:23:36.474927 tst iperf3.py:8: start network... 02:23:36.599451 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:23:37.078046 run create_hlr_db(pid=29026): Launched 02:23:37.248927 bus /gobi_6: Setting Powered False 02:23:38.270365 run create_hlr_db(pid=29026): Terminated: ok {rc=0} 02:23:38.695940 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29028): Launched 02:23:39.018478 run osmo-hlr_10.42.42.2(pid=29029): Launched 02:23:39.136578 run osmo-stp_10.42.42.5: Starting osmo-stp 02:23:39.695077 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29031): Launched 02:23:40.019129 run osmo-stp_10.42.42.5(pid=29032): Launched 02:23:40.136398 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:23:40.696291 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29034): Launched 02:23:40.811232 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:23:41.091583 run patchelf(pid=29035): Launched 02:23:41.279321 run osmo-stp_10.42.42.5(pid=29032): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29032)] 02:23:41.416777 run osmo-stp_10.42.42.5(pid=29032): stdout: | (launched: 2022-12-14_02:23:39.858492) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:23:41.554641 run osmo-stp_10.42.42.5(pid=29032): stderr: | �[0;m�[38;5;43m20221214022340050 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214022340051 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214022340051 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214022340051 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214022340052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214022340052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214022340052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:23:41.688051 run osmo-stp_10.42.42.5(pid=29032): stdout: | (launched: 2022-12-14_02:23:39.858492) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:23:41.820555 run osmo-stp_10.42.42.5(pid=29032): stderr: | �[0;m�[38;5;43m20221214022340050 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214022340051 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214022340051 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214022340051 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214022340052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214022340052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214022340052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:23:41.975774 run patchelf(pid=29035): Terminating (SIGINT) 02:23:42.157745 run patchelf(pid=29035): Terminated: ok {rc=0} 02:23:42.191119 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=29032): Process ended prematurely: osmo-stp_10.42.42.5(pid=29032) [trial-2398↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29032)] [trial-2398↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8] 02:23:42.200839 tst iperf3.py:8: Test FAILED (7.6 sec) 02:23:42.264240 run osmo-hlr_10.42.42.2(pid=29029): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29029)] 02:23:42.316044 run osmo-hlr_10.42.42.2(pid=29029): stdout: | (launched: 2022-12-14_02:23:38.860062) 02:23:42.368450 run osmo-hlr_10.42.42.2(pid=29029): stderr: | �[0;m�[1;31m20221214022339057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214022339057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214022339057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214022339057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214022339057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214022339057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214022339069 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:oc2g+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214022339077 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214022339077 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214022339077 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:23:42.413513 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29024): Terminating (SIGTERM) 02:23:42.455993 run iperf3-srv_10.42.42.10(pid=29025): Terminating (SIGTERM) 02:23:42.498460 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29028): Terminating (SIGTERM) 02:23:42.540779 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29031): Terminating (SIGTERM) 02:23:42.583261 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29034): Terminating (SIGTERM) 02:23:42.592786 --- ParallelTerminationStrategy: PID 29024 died... 02:23:42.649535 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29024): Terminated: ok {rc=0} 02:23:42.659519 --- ParallelTerminationStrategy: PID 29025 died... 02:23:42.715807 run iperf3-srv_10.42.42.10(pid=29025): Terminated {rc=256} 02:23:42.725818 --- ParallelTerminationStrategy: PID 29028 died... 02:23:42.781572 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29028): Terminated: ok {rc=0} 02:23:42.791456 --- ParallelTerminationStrategy: PID 29031 died... 02:23:42.847734 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29031): Terminated: ok {rc=0} 02:23:42.857780 --- ParallelTerminationStrategy: PID 29034 died... 02:23:42.914082 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29034): Terminated: ok {rc=0} 02:23:43.002418 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29032): Process ended prematurely: osmo-stp_10.42.42.5(pid=29032) [trial-2398↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29032)]