Failed
gprs:trx-lms+mod-bts0-egprs.iperf3.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=32195): Process ended prematurely: osmo-stp_10.42.42.5(pid=32195) [trial-2398↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32195)]
Standard Output
---------------------------------------------- trial-2398 gprs:trx-lms+mod-bts0-egprs iperf3.py ---------------------------------------------- 02:56:59.330986 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:59.343185 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 02:56:59.490372 tst iperf3.py: using LAC 38065 02:56:59.617573 tst iperf3.py: using RAC 70 02:56:59.746516 tst iperf3.py: using CellId 38065 02:56:59.869252 tst iperf3.py: using BVCI 38066 02:56:59.892598 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:59.903610 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:59.914519 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:59.925227 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:59.935674 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:59.946845 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:59.959014 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:59.969880 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:59.980843 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:57:00.277043 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 02:57:00.413737 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:57:00.752740 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32187): Launched 02:57:01.130013 run iperf3-srv_10.42.42.10(pid=32188): Launched 02:57:01.359723 tst iperf3.py:8: start network... 02:57:01.500063 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:57:02.059884 run create_hlr_db(pid=32189): Launched 02:57:02.261786 bus /gobi_6: Setting Powered False 02:57:03.271521 run create_hlr_db(pid=32189): Terminated: ok {rc=0} 02:57:03.686754 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32191): Launched 02:57:03.995241 run osmo-hlr_10.42.42.2(pid=32192): Launched 02:57:04.116834 run osmo-stp_10.42.42.5: Starting osmo-stp 02:57:04.654106 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32194): Launched 02:57:04.959237 run osmo-stp_10.42.42.5(pid=32195): Launched 02:57:05.070606 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:57:05.599969 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32197): Launched 02:57:05.708088 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:57:05.974143 run patchelf(pid=32198): Launched 02:57:06.152786 run osmo-stp_10.42.42.5(pid=32195): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32195)] 02:57:06.282590 run osmo-stp_10.42.42.5(pid=32195): stdout: | (launched: 2022-12-14_02:57:04.808312) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:57:06.412733 run osmo-stp_10.42.42.5(pid=32195): stderr: | �[0;m�[38;5;43m20221214025704981 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214025704981 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214025704981 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214025704981 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214025704982 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214025704982 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214025704982 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:57:06.538663 run osmo-stp_10.42.42.5(pid=32195): stdout: | (launched: 2022-12-14_02:57:04.808312) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:57:06.663504 run osmo-stp_10.42.42.5(pid=32195): stderr: | �[0;m�[38;5;43m20221214025704981 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214025704981 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214025704981 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214025704981 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214025704982 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214025704982 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214025704982 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:57:06.809485 run patchelf(pid=32198): Terminating (SIGINT) 02:57:06.981331 run patchelf(pid=32198): Terminated: ok {rc=0} 02:57:07.012784 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=32195): Process ended prematurely: osmo-stp_10.42.42.5(pid=32195) [trial-2398↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32195)] [trial-2398↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8] 02:57:07.022075 tst iperf3.py:8: Test FAILED (7.7 sec) 02:57:07.082067 run osmo-hlr_10.42.42.2(pid=32192): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32192)] 02:57:07.131310 run osmo-hlr_10.42.42.2(pid=32192): stdout: | (launched: 2022-12-14_02:57:03.842271) 02:57:07.181281 run osmo-hlr_10.42.42.2(pid=32192): stderr: | �[0;m�[1;31m20221214025704020 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214025704020 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214025704020 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214025704020 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214025704020 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214025704020 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214025704032 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:trx-lms+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214025704040 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214025704041 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214025704041 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:57:07.223721 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32187): Terminating (SIGTERM) 02:57:07.263429 run iperf3-srv_10.42.42.10(pid=32188): Terminating (SIGTERM) 02:57:07.303397 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32191): Terminating (SIGTERM) 02:57:07.343473 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32194): Terminating (SIGTERM) 02:57:07.383414 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32197): Terminating (SIGTERM) 02:57:07.392747 --- ParallelTerminationStrategy: PID 32187 died... 02:57:07.446352 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32187): Terminated: ok {rc=0} 02:57:07.456032 --- ParallelTerminationStrategy: PID 32188 died... 02:57:07.509115 run iperf3-srv_10.42.42.10(pid=32188): Terminated {rc=256} 02:57:07.518648 --- ParallelTerminationStrategy: PID 32191 died... 02:57:07.571674 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32191): Terminated: ok {rc=0} 02:57:07.581369 --- ParallelTerminationStrategy: PID 32194 died... 02:57:07.634278 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32194): Terminated: ok {rc=0} 02:57:07.643899 --- ParallelTerminationStrategy: PID 32197 died... 02:57:07.696892 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32197): Terminated: ok {rc=0} 02:57:07.785302 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32195): Process ended prematurely: osmo-stp_10.42.42.5(pid=32195) [trial-2398↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32195)]