Failed
gprs:trx-lms+mod-bts0-egprs.ping.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=32223): Process ended prematurely: osmo-stp_10.42.42.5(pid=32223) [trial-2398↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32223)]
Standard Output
---------------------------------------------- trial-2398 gprs:trx-lms+mod-bts0-egprs ping.py ---------------------------------------------- 02:57:28.775466 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:57:28.787156 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 02:57:28.931548 tst ping.py: using LAC 38067 02:57:29.061146 tst ping.py: using RAC 72 02:57:29.190163 tst ping.py: using CellId 38067 02:57:29.316806 tst ping.py: using BVCI 38068 02:57:29.342018 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:57:29.353398 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:57:29.364416 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:57:29.375518 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:57:29.387436 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:57:29.399433 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:57:29.411670 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:57:29.423731 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:57:29.717802 tst ping.py:19: start network... 02:57:29.851474 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:57:30.357720 run create_hlr_db(pid=32217): Launched 02:57:30.543632 bus /gobi_6: Setting Powered False 02:57:31.611542 run create_hlr_db(pid=32217): Terminated: ok {rc=0} 02:57:32.108304 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32219): Launched 02:57:32.425946 run osmo-hlr_10.42.42.2(pid=32220): Launched 02:57:32.548548 run osmo-stp_10.42.42.5: Starting osmo-stp 02:57:33.109366 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32222): Launched 02:57:33.431316 run osmo-stp_10.42.42.5(pid=32223): Launched 02:57:33.548325 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:57:34.107685 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32225): Launched 02:57:34.222222 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:57:34.502606 run patchelf(pid=32226): Launched 02:57:34.690746 run osmo-stp_10.42.42.5(pid=32223): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32223)] 02:57:34.827095 run osmo-stp_10.42.42.5(pid=32223): stdout: | (launched: 2022-12-14_02:57:33.271564) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:57:34.964063 run osmo-stp_10.42.42.5(pid=32223): stderr: | �[0;m�[38;5;43m20221214025733464 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214025733464 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214025733464 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214025733464 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214025733465 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214025733465 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214025733465 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:57:35.097784 run osmo-stp_10.42.42.5(pid=32223): stdout: | (launched: 2022-12-14_02:57:33.271564) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:57:35.229442 run osmo-stp_10.42.42.5(pid=32223): stderr: | �[0;m�[38;5;43m20221214025733464 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214025733464 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214025733464 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214025733464 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214025733465 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214025733465 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214025733465 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:57:35.382832 run patchelf(pid=32226): Terminating (SIGINT) 02:57:35.563567 run patchelf(pid=32226): Terminated: ok {rc=0} 02:57:35.596462 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=32223): Process ended prematurely: osmo-stp_10.42.42.5(pid=32223) [trial-2398↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32223)] [trial-2398↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22] 02:57:35.605963 tst ping.py:22: Test FAILED (6.8 sec) 02:57:35.669732 run osmo-hlr_10.42.42.2(pid=32220): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:trx-lms+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32220)] 02:57:35.721752 run osmo-hlr_10.42.42.2(pid=32220): stdout: | (launched: 2022-12-14_02:57:32.266797) 02:57:35.774593 run osmo-hlr_10.42.42.2(pid=32220): stderr: | �[0;m�[1;31m20221214025732466 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214025732466 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214025732466 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214025732466 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214025732466 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214025732466 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214025732482 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:trx-lms+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214025732490 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214025732490 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214025732490 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:57:35.822933 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32219): Terminating (SIGTERM) 02:57:35.862715 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32222): Terminating (SIGTERM) 02:57:35.902606 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32225): Terminating (SIGTERM) 02:57:35.911927 --- ParallelTerminationStrategy: PID 32219 died... 02:57:35.965599 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32219): Terminated: ok {rc=0} 02:57:35.975261 --- ParallelTerminationStrategy: PID 32222 died... 02:57:36.028146 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32222): Terminated: ok {rc=0} 02:57:36.037799 --- ParallelTerminationStrategy: PID 32225 died... 02:57:36.090794 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32225): Terminated: ok {rc=0} 02:57:36.177672 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32223): Process ended prematurely: osmo-stp_10.42.42.5(pid=32223) [trial-2398↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32223)]