Failed
gprs:trx-lms-limenet-micro+mod-bts0-egprs.iperf3.py (from gprs_trx-lms-limenet-micro+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=851): Process ended prematurely: osmo-stp_10.42.42.5(pid=851) [trial-2398↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=851)]
Standard Output
---------------------------------------------- trial-2398 gprs:trx-lms-limenet-micro+mod-bts0-egprs iperf3.py ---------------------------------------------- 03:04:52.053720 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:04:52.065348 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x bts (candidates: 1) 03:04:52.204229 tst iperf3.py: using LAC 38107 03:04:52.329629 tst iperf3.py: using RAC 112 03:04:52.445740 tst iperf3.py: using CellId 38107 03:04:52.561390 tst iperf3.py: using BVCI 38108 03:04:52.584230 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:04:52.595309 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:04:52.606188 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:04:52.616919 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:04:52.627585 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:04:52.638298 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:04:52.648998 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:04:52.659539 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:04:52.670346 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x modem (candidates: 4) 03:04:52.959926 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 03:04:53.092909 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:04:53.421002 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=842): Launched 03:04:53.693911 run iperf3-srv_10.42.42.10(pid=844): Launched 03:04:53.888928 tst iperf3.py:8: start network... 03:04:54.021827 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:04:54.522817 run create_hlr_db(pid=845): Launched 03:04:54.706450 bus /gobi_6: Setting Powered False 03:04:55.727623 run create_hlr_db(pid=845): Terminated: ok {rc=0} 03:04:56.125321 run pcap-recorder_any(filters='host 10.42.42.2')(pid=847): Launched 03:04:56.424307 run osmo-hlr_10.42.42.2(pid=848): Launched 03:04:56.541902 run osmo-stp_10.42.42.5: Starting osmo-stp 03:04:57.065101 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=850): Launched 03:04:57.360493 run osmo-stp_10.42.42.5(pid=851): Launched 03:04:57.468893 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:04:57.984039 run pcap-recorder_any(filters='host 10.42.42.6')(pid=853): Launched 03:04:58.089200 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:04:58.346480 run patchelf(pid=854): Launched 03:04:58.519458 run osmo-stp_10.42.42.5(pid=851): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=851)] 03:04:58.646157 run osmo-stp_10.42.42.5(pid=851): stdout: | (launched: 2022-12-14_03:04:57.215311) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:04:58.772725 run osmo-stp_10.42.42.5(pid=851): stderr: | �[0;m�[38;5;43m20221214030457383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214030457383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214030457383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214030457383 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214030457386 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214030457386 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214030457386 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:04:58.895414 run osmo-stp_10.42.42.5(pid=851): stdout: | (launched: 2022-12-14_03:04:57.215311) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:04:59.017082 run osmo-stp_10.42.42.5(pid=851): stderr: | �[0;m�[38;5;43m20221214030457383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214030457383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214030457383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214030457383 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214030457386 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214030457386 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214030457386 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:04:59.159163 run patchelf(pid=854): Terminating (SIGINT) 03:04:59.326162 run patchelf(pid=854): Terminated: ok {rc=0} 03:04:59.356926 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=851): Process ended prematurely: osmo-stp_10.42.42.5(pid=851) [trial-2398↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=851)] [trial-2398↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8] 03:04:59.366658 tst iperf3.py:8: Test FAILED (7.3 sec) 03:04:59.425950 run osmo-hlr_10.42.42.2(pid=848): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=848)] 03:04:59.474443 run osmo-hlr_10.42.42.2(pid=848): stdout: | (launched: 2022-12-14_03:04:56.275923) 03:04:59.523647 run osmo-hlr_10.42.42.2(pid=848): stderr: | �[0;m�[1;31m20221214030456451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214030456451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214030456451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214030456451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214030456451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214030456452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214030456464 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:trx-lms-limenet-micro+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214030456474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214030456474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214030456474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:04:59.566115 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=842): Terminating (SIGTERM) 03:04:59.605770 run iperf3-srv_10.42.42.10(pid=844): Terminating (SIGTERM) 03:04:59.645144 run pcap-recorder_any(filters='host 10.42.42.2')(pid=847): Terminating (SIGTERM) 03:04:59.684438 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=850): Terminating (SIGTERM) 03:04:59.723766 run pcap-recorder_any(filters='host 10.42.42.6')(pid=853): Terminating (SIGTERM) 03:04:59.732503 --- ParallelTerminationStrategy: PID 842 died... 03:04:59.785998 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=842): Terminated: ok {rc=0} 03:04:59.795674 --- ParallelTerminationStrategy: PID 844 died... 03:04:59.847961 run iperf3-srv_10.42.42.10(pid=844): Terminated {rc=256} 03:04:59.857493 --- ParallelTerminationStrategy: PID 847 died... 03:04:59.909688 run pcap-recorder_any(filters='host 10.42.42.2')(pid=847): Terminated: ok {rc=0} 03:04:59.919030 --- ParallelTerminationStrategy: PID 850 died... 03:04:59.971323 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=850): Terminated: ok {rc=0} 03:04:59.980883 --- ParallelTerminationStrategy: PID 853 died... 03:05:00.033141 run pcap-recorder_any(filters='host 10.42.42.6')(pid=853): Terminated: ok {rc=0} 03:05:00.115480 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=851): Process ended prematurely: osmo-stp_10.42.42.5(pid=851) [trial-2398↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=851)]