Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo.iperf3m4.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=1029): Process ended prematurely: osmo-stp_10.42.42.5(pid=1029) [trial-2398↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1029)]
Standard Output
---------------------------------------------- trial-2398 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo iperf3m4.py ---------------------------------------------- 03:07:00.790897 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:07:00.803210 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 03:07:00.989898 tst iperf3m4.py: using LAC 38118 03:07:01.119744 tst iperf3m4.py: using RAC 123 03:07:01.281606 tst iperf3m4.py: using CellId 38118 03:07:01.405084 tst iperf3m4.py: using BVCI 38119 03:07:01.429377 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:07:01.441201 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:07:01.452796 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:07:01.464335 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:07:01.476266 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:07:01.488449 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:07:01.500186 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:07:01.511853 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:07:01.524174 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 03:07:01.654545 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 03:07:01.780738 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 03:07:01.896758 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 03:07:02.174755 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 03:07:02.307138 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:07:02.640060 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1015): Launched 03:07:02.916313 run iperf3-srv_10.42.42.10(pid=1016): Launched 03:07:03.112803 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 03:07:03.246864 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:07:03.578998 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1017): Launched 03:07:03.854638 run iperf3-srv_10.42.42.10(pid=1018): Launched 03:07:04.050569 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 03:07:04.181356 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:07:04.490841 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1019): Launched 03:07:04.749111 run iperf3-srv_10.42.42.10(pid=1020): Launched 03:07:04.930986 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 03:07:05.055101 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:07:05.364335 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1021): Launched 03:07:05.621653 run iperf3-srv_10.42.42.10(pid=1022): Launched 03:07:05.802793 tst iperf3m4.py:8: start network... 03:07:05.926930 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:07:06.405818 run create_hlr_db(pid=1023): Launched 03:07:06.578753 bus /gobi_6: Setting Powered False 03:07:07.600896 run create_hlr_db(pid=1023): Terminated: ok {rc=0} 03:07:07.999284 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1025): Launched 03:07:08.297586 run osmo-hlr_10.42.42.2(pid=1026): Launched 03:07:08.405454 run osmo-stp_10.42.42.5: Starting osmo-stp 03:07:08.925875 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1028): Launched 03:07:09.224666 run osmo-stp_10.42.42.5(pid=1029): Launched 03:07:09.333964 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:07:09.854588 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1031): Launched 03:07:09.961193 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:07:10.222412 run patchelf(pid=1032): Launched 03:07:10.397615 run osmo-stp_10.42.42.5(pid=1029): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1029)] 03:07:10.525547 run osmo-stp_10.42.42.5(pid=1029): stdout: | (launched: 2022-12-14_03:07:09.077932) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:07:10.653567 run osmo-stp_10.42.42.5(pid=1029): stderr: | �[0;m�[38;5;43m20221214030709249 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214030709249 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214030709249 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214030709250 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214030709250 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214030709250 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214030709250 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:07:10.777402 run osmo-stp_10.42.42.5(pid=1029): stdout: | (launched: 2022-12-14_03:07:09.077932) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:07:10.901636 run osmo-stp_10.42.42.5(pid=1029): stderr: | �[0;m�[38;5;43m20221214030709249 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214030709249 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214030709249 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214030709250 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214030709250 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214030709250 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214030709250 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:07:11.045115 run patchelf(pid=1032): Terminating (SIGINT) 03:07:11.214497 run patchelf(pid=1032): Terminated: ok {rc=0} 03:07:11.245664 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=1029): Process ended prematurely: osmo-stp_10.42.42.5(pid=1029) [trial-2398↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1029)] [trial-2398↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3m4.py:8] 03:07:11.254990 tst iperf3m4.py:8: Test FAILED (10.5 sec) 03:07:11.315216 run osmo-hlr_10.42.42.2(pid=1026): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1026)] 03:07:11.364084 run osmo-hlr_10.42.42.2(pid=1026): stdout: | (launched: 2022-12-14_03:07:08.151550) 03:07:11.413462 run osmo-hlr_10.42.42.2(pid=1026): stderr: | �[0;m�[1;31m20221214030708328 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214030708328 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214030708328 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214030708328 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214030708328 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214030708328 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214030708351 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214030708360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214030708360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214030708360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:07:11.455817 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1015): Terminating (SIGTERM) 03:07:11.495672 run iperf3-srv_10.42.42.10(pid=1016): Terminating (SIGTERM) 03:07:11.535444 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1017): Terminating (SIGTERM) 03:07:11.575583 run iperf3-srv_10.42.42.10(pid=1018): Terminating (SIGTERM) 03:07:11.615429 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1019): Terminating (SIGTERM) 03:07:11.654986 run iperf3-srv_10.42.42.10(pid=1020): Terminating (SIGTERM) 03:07:11.694529 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1021): Terminating (SIGTERM) 03:07:11.733912 run iperf3-srv_10.42.42.10(pid=1022): Terminating (SIGTERM) 03:07:11.773436 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1025): Terminating (SIGTERM) 03:07:11.813369 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1028): Terminating (SIGTERM) 03:07:11.854076 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1031): Terminating (SIGTERM) 03:07:11.863290 --- ParallelTerminationStrategy: PID 1015 died... 03:07:11.916540 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1015): Terminated: ok {rc=0} 03:07:11.926209 --- ParallelTerminationStrategy: PID 1016 died... 03:07:11.978949 run iperf3-srv_10.42.42.10(pid=1016): Terminated {rc=256} 03:07:11.988348 --- ParallelTerminationStrategy: PID 1017 died... 03:07:12.041113 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1017): Terminated: ok {rc=0} 03:07:12.050629 --- ParallelTerminationStrategy: PID 1018 died... 03:07:12.103150 run iperf3-srv_10.42.42.10(pid=1018): Terminated {rc=256} 03:07:12.112693 --- ParallelTerminationStrategy: PID 1019 died... 03:07:12.165234 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1019): Terminated: ok {rc=0} 03:07:12.174734 --- ParallelTerminationStrategy: PID 1020 died... 03:07:12.227174 run iperf3-srv_10.42.42.10(pid=1020): Terminated {rc=256} 03:07:12.236688 --- ParallelTerminationStrategy: PID 1021 died... 03:07:12.289464 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1021): Terminated: ok {rc=0} 03:07:12.299083 --- ParallelTerminationStrategy: PID 1022 died... 03:07:12.351697 run iperf3-srv_10.42.42.10(pid=1022): Terminated {rc=256} 03:07:12.361294 --- ParallelTerminationStrategy: PID 1025 died... 03:07:12.413837 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1025): Terminated: ok {rc=0} 03:07:12.423382 --- ParallelTerminationStrategy: PID 1028 died... 03:07:12.475930 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1028): Terminated: ok {rc=0} 03:07:12.485908 --- ParallelTerminationStrategy: PID 1031 died... 03:07:12.538742 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1031): Terminated: ok {rc=0} 03:07:12.627435 bus /gobi_4: Setting Powered False 03:07:13.730163 bus /gobi_4: Setting Powered False 03:07:14.840780 bus /gobi_1: Setting Powered False 03:07:15.957210 bus /gobi_1: Setting Powered False 03:07:17.093500 bus /gobi_0: Setting Powered False 03:07:18.201563 bus /gobi_0: Setting Powered False 03:07:19.310734 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1029): Process ended prematurely: osmo-stp_10.42.42.5(pid=1029) [trial-2398↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1029)]