Failed
gprs:nanobts+band-1900+mod-bts0-dynts-ipa.ping.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=9791): Process ended prematurely: osmo-stp_10.42.42.5(pid=9791) [trial-2399↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9791)]
Standard Output
---------------------------------------------- trial-2399 gprs:nanobts+band-1900+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 04:40:59.731963 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:40:59.743570 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 04:40:59.888135 tst ping.py: using LAC 38613 04:41:00.006488 tst ping.py: using RAC 108 04:41:00.123022 tst ping.py: using CellId 38613 04:41:00.242113 tst ping.py: using BVCI 38614 04:41:00.264832 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:41:00.276000 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:41:00.286942 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:41:00.297809 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:41:00.308540 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:41:00.319436 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:41:00.330411 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:41:00.341227 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 04:41:00.614788 tst ping.py:19: start network... 04:41:00.741209 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:41:01.284201 run create_hlr_db(pid=9785): Launched 04:41:01.462975 bus /gobi_6: Setting Powered False 04:41:02.490360 run create_hlr_db(pid=9785): Terminated: ok {rc=0} 04:41:02.892605 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9787): Launched 04:41:03.192026 run osmo-hlr_10.42.42.2(pid=9788): Launched 04:41:03.300886 run osmo-stp_10.42.42.5: Starting osmo-stp 04:41:03.824454 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9790): Launched 04:41:04.121288 run osmo-stp_10.42.42.5(pid=9791): Launched 04:41:04.228604 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:41:04.750148 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9793): Launched 04:41:04.854922 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:41:05.114390 run patchelf(pid=9794): Launched 04:41:05.287807 run osmo-stp_10.42.42.5(pid=9791): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9791)] 04:41:05.415125 run osmo-stp_10.42.42.5(pid=9791): stdout: | (launched: 2022-12-14_04:41:03.974445) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:41:05.542862 run osmo-stp_10.42.42.5(pid=9791): stderr: | �[0;m�[38;5;43m20221214044104143 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214044104143 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214044104143 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214044104144 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214044104144 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214044104144 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214044104144 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:41:05.665517 run osmo-stp_10.42.42.5(pid=9791): stdout: | (launched: 2022-12-14_04:41:03.974445) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:41:05.786613 run osmo-stp_10.42.42.5(pid=9791): stderr: | �[0;m�[38;5;43m20221214044104143 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214044104143 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214044104143 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214044104144 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214044104144 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214044104144 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214044104144 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:41:05.927860 run patchelf(pid=9794): Terminating (SIGINT) 04:41:06.093757 run patchelf(pid=9794): Terminated: ok {rc=0} 04:41:06.124094 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=9791): Process ended prematurely: osmo-stp_10.42.42.5(pid=9791) [trial-2399↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9791)] [trial-2399↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py:22] 04:41:06.132615 tst ping.py:22: Test FAILED (6.4 sec) 04:41:06.191761 run osmo-hlr_10.42.42.2(pid=9788): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9788)] 04:41:06.240740 run osmo-hlr_10.42.42.2(pid=9788): stdout: | (launched: 2022-12-14_04:41:03.043320) 04:41:06.289707 run osmo-hlr_10.42.42.2(pid=9788): stderr: | �[0;m�[1;31m20221214044103218 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214044103218 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214044103218 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214044103218 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214044103218 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214044103218 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214044103230 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214044103240 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214044103240 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214044103240 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:41:06.331202 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9787): Terminating (SIGTERM) 04:41:06.370701 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9790): Terminating (SIGTERM) 04:41:06.409883 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9793): Terminating (SIGTERM) 04:41:06.419028 --- ParallelTerminationStrategy: PID 9787 died... 04:41:06.471762 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9787): Terminated: ok {rc=0} 04:41:06.481377 --- ParallelTerminationStrategy: PID 9790 died... 04:41:06.533627 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9790): Terminated: ok {rc=0} 04:41:06.543080 --- ParallelTerminationStrategy: PID 9793 died... 04:41:06.595130 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9793): Terminated: ok {rc=0} 04:41:06.683196 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9791): Process ended prematurely: osmo-stp_10.42.42.5(pid=9791) [trial-2399↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9791)]