Failed
gprs:nanobts+band-900+mod-bts0-egprs.iperf3.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=10127): Process ended prematurely: osmo-stp_10.42.42.5(pid=10127) [trial-2399↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10127)]
Standard Output
---------------------------------------------- trial-2399 gprs:nanobts+band-900+mod-bts0-egprs iperf3.py ---------------------------------------------- 04:45:42.055710 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:42.067315 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 04:45:42.208260 tst iperf3.py: using LAC 38639 04:45:42.329984 tst iperf3.py: using RAC 134 04:45:42.452043 tst iperf3.py: using CellId 38639 04:45:42.573802 tst iperf3.py: using BVCI 38640 04:45:42.596926 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:42.608330 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:42.619257 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:42.630149 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:42.640897 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:42.651796 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:42.662921 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:42.673977 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:42.684994 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 04:45:42.980409 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 04:45:43.117552 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:45:43.457124 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10119): Launched 04:45:43.740602 run iperf3-srv_10.42.42.10(pid=10120): Launched 04:45:43.941754 tst iperf3.py:8: start network... 04:45:44.078656 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:45:44.598675 run create_hlr_db(pid=10121): Launched 04:45:44.787626 bus /gobi_6: Setting Powered False 04:45:45.809307 run create_hlr_db(pid=10121): Terminated: ok {rc=0} 04:45:46.306004 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10123): Launched 04:45:46.739644 run osmo-hlr_10.42.42.2(pid=10124): Launched 04:45:46.928619 run osmo-stp_10.42.42.5: Starting osmo-stp 04:45:47.617150 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10126): Launched 04:45:47.923272 run osmo-stp_10.42.42.5(pid=10127): Launched 04:45:48.033853 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:45:48.566666 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10129): Launched 04:45:48.674908 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:45:48.941107 run patchelf(pid=10130): Launched 04:45:49.119114 run osmo-stp_10.42.42.5(pid=10127): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10127)] 04:45:49.250062 run osmo-stp_10.42.42.5(pid=10127): stdout: | (launched: 2022-12-14_04:45:47.772408) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:45:49.380503 run osmo-stp_10.42.42.5(pid=10127): stderr: | �[0;m�[38;5;43m20221214044547941 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214044547941 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214044547941 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214044547942 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214044547942 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214044547942 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214044547942 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:45:49.506398 run osmo-stp_10.42.42.5(pid=10127): stdout: | (launched: 2022-12-14_04:45:47.772408) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:45:49.631320 run osmo-stp_10.42.42.5(pid=10127): stderr: | �[0;m�[38;5;43m20221214044547941 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214044547941 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214044547941 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214044547942 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214044547942 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214044547942 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214044547942 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:45:49.776816 run patchelf(pid=10130): Terminating (SIGINT) 04:45:49.948074 run patchelf(pid=10130): Terminated: ok {rc=0} 04:45:49.979468 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=10127): Process ended prematurely: osmo-stp_10.42.42.5(pid=10127) [trial-2399↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10127)] [trial-2399↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8] 04:45:49.988689 tst iperf3.py:8: Test FAILED (8.0 sec) 04:45:50.048736 run osmo-hlr_10.42.42.2(pid=10124): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10124)] 04:45:50.097565 run osmo-hlr_10.42.42.2(pid=10124): stdout: | (launched: 2022-12-14_04:45:46.475538) 04:45:50.146987 run osmo-hlr_10.42.42.2(pid=10124): stderr: | �[0;m�[1;31m20221214044546766 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214044546766 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214044546766 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214044546766 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214044546766 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214044546766 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214044546782 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:nanobts+band-900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214044546803 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214044546803 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214044546803 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:45:50.189106 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10119): Terminating (SIGTERM) 04:45:50.228602 run iperf3-srv_10.42.42.10(pid=10120): Terminating (SIGTERM) 04:45:50.268201 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10123): Terminating (SIGTERM) 04:45:50.307707 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10126): Terminating (SIGTERM) 04:45:50.347271 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10129): Terminating (SIGTERM) 04:45:50.356642 --- ParallelTerminationStrategy: PID 10119 died... 04:45:50.409973 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10119): Terminated: ok {rc=0} 04:45:50.419711 --- ParallelTerminationStrategy: PID 10120 died... 04:45:50.472291 run iperf3-srv_10.42.42.10(pid=10120): Terminated {rc=256} 04:45:50.481979 --- ParallelTerminationStrategy: PID 10123 died... 04:45:50.534799 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10123): Terminated: ok {rc=0} 04:45:50.544435 --- ParallelTerminationStrategy: PID 10126 died... 04:45:50.597241 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10126): Terminated: ok {rc=0} 04:45:50.606982 --- ParallelTerminationStrategy: PID 10129 died... 04:45:50.659863 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10129): Terminated: ok {rc=0} 04:45:50.743236 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10127): Process ended prematurely: osmo-stp_10.42.42.5(pid=10127) [trial-2399↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10127)]