Failed
gprs:sysmo+mod-bts0-egprs.iperf3.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=4602): Process ended prematurely: osmo-stp_10.42.42.5(pid=4602) [trial-2399↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4602)]
Standard Output
---------------------------------------------- trial-2399 gprs:sysmo+mod-bts0-egprs iperf3.py ---------------------------------------------- 03:41:56.494650 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:56.506100 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 03:41:56.630799 tst iperf3.py: using LAC 38300 03:41:56.750700 tst iperf3.py: using RAC 50 03:41:56.872408 tst iperf3.py: using CellId 38300 03:41:56.994871 tst iperf3.py: using BVCI 38301 03:41:57.018329 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:57.029111 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:57.039669 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:57.050219 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:57.061119 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:57.071845 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:57.082806 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:57.093579 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:41:57.104451 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 03:41:57.384173 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 03:41:57.512039 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:41:57.829886 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4588): Launched 03:41:58.094478 run iperf3-srv_10.42.42.10(pid=4589): Launched 03:41:58.279981 tst iperf3.py:8: start network... 03:41:58.406868 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:41:58.900147 run create_hlr_db(pid=4590): Launched 03:41:59.075952 bus /gobi_6: Setting Powered False 03:42:00.097217 run create_hlr_db(pid=4590): Terminated: ok {rc=0} 03:42:00.535591 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4592): Launched 03:42:00.957276 run osmo-hlr_10.42.42.2(pid=4593): Launched 03:42:01.168643 run osmo-stp_10.42.42.5: Starting osmo-stp 03:42:01.768865 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4601): Launched 03:42:02.186640 run osmo-stp_10.42.42.5(pid=4602): Launched 03:42:02.357367 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:42:02.906111 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4604): Launched 03:42:03.016017 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:42:03.285883 run patchelf(pid=4605): Launched 03:42:03.466934 run osmo-stp_10.42.42.5(pid=4602): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4602)] 03:42:03.597336 run osmo-stp_10.42.42.5(pid=4602): stdout: | (launched: 2022-12-14_03:42:01.929626) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:42:03.727821 run osmo-stp_10.42.42.5(pid=4602): stderr: | �[0;m�[38;5;43m20221214034202267 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214034202267 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214034202267 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214034202268 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214034202268 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214034202268 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214034202268 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:42:03.854287 run osmo-stp_10.42.42.5(pid=4602): stdout: | (launched: 2022-12-14_03:42:01.929626) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:42:03.978995 run osmo-stp_10.42.42.5(pid=4602): stderr: | �[0;m�[38;5;43m20221214034202267 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214034202267 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214034202267 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214034202268 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214034202268 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214034202268 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214034202268 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:42:04.124110 run patchelf(pid=4605): Terminating (SIGINT) 03:42:04.295077 run patchelf(pid=4605): Terminated: ok {rc=0} 03:42:04.326518 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=4602): Process ended prematurely: osmo-stp_10.42.42.5(pid=4602) [trial-2399↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4602)] [trial-2399↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8] 03:42:04.335846 tst iperf3.py:8: Test FAILED (7.9 sec) 03:42:04.395904 run osmo-hlr_10.42.42.2(pid=4593): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:sysmo+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4593)] 03:42:04.444666 run osmo-hlr_10.42.42.2(pid=4593): stdout: | (launched: 2022-12-14_03:42:00.702998) 03:42:04.494144 run osmo-hlr_10.42.42.2(pid=4593): stderr: | �[0;m�[1;31m20221214034201040 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214034201040 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214034201040 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214034201041 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214034201041 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214034201048 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214034201109 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:sysmo+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214034201120 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214034201120 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214034201120 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:42:04.536023 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4588): Terminating (SIGTERM) 03:42:04.575157 run iperf3-srv_10.42.42.10(pid=4589): Terminating (SIGTERM) 03:42:04.614845 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4592): Terminating (SIGTERM) 03:42:04.654014 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4601): Terminating (SIGTERM) 03:42:04.693219 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4604): Terminating (SIGTERM) 03:42:04.702286 --- ParallelTerminationStrategy: PID 4588 died... 03:42:04.754878 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4588): Terminated: ok {rc=0} 03:42:04.764220 --- ParallelTerminationStrategy: PID 4589 died... 03:42:04.816575 run iperf3-srv_10.42.42.10(pid=4589): Terminated {rc=256} 03:42:04.825951 --- ParallelTerminationStrategy: PID 4592 died... 03:42:04.878368 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4592): Terminated: ok {rc=0} 03:42:04.887730 --- ParallelTerminationStrategy: PID 4601 died... 03:42:04.940316 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4601): Terminated: ok {rc=0} 03:42:04.949803 --- ParallelTerminationStrategy: PID 4604 died... 03:42:05.002358 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4604): Terminated: ok {rc=0} 03:42:05.089829 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4602): Process ended prematurely: osmo-stp_10.42.42.5(pid=4602) [trial-2399↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4602)]