Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo.ping.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=9086): Process ended prematurely: osmo-stp_10.42.42.5(pid=9086) [trial-2399↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9086)]
Standard Output
---------------------------------------------- trial-2399 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo ping.py ---------------------------------------------- 04:34:50.791153 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:34:50.803124 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 04:34:50.955060 tst ping.py: using LAC 38580 04:34:51.069517 tst ping.py: using RAC 75 04:34:51.184433 tst ping.py: using CellId 38580 04:34:51.299186 tst ping.py: using BVCI 38581 04:34:51.321766 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:34:51.332661 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:34:51.343549 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:34:51.354396 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:34:51.365180 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:34:51.375945 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:34:51.386931 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:34:51.397862 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 04:34:51.685783 tst ping.py:19: start network... 04:34:51.817691 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:34:52.316777 run create_hlr_db(pid=9080): Launched 04:34:52.500349 bus /gobi_6: Setting Powered False 04:34:53.521666 run create_hlr_db(pid=9080): Terminated: ok {rc=0} 04:34:53.945445 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9082): Launched 04:34:54.263852 run osmo-hlr_10.42.42.2(pid=9083): Launched 04:34:54.379206 run osmo-stp_10.42.42.5: Starting osmo-stp 04:34:54.933127 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9085): Launched 04:34:55.251042 run osmo-stp_10.42.42.5(pid=9086): Launched 04:34:55.366604 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:34:55.921995 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9088): Launched 04:34:56.034748 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:34:56.312325 run patchelf(pid=9089): Launched 04:34:56.498193 run osmo-stp_10.42.42.5(pid=9086): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9086)] 04:34:56.634626 run osmo-stp_10.42.42.5(pid=9086): stdout: | (launched: 2022-12-14_04:34:55.093371) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:34:56.771095 run osmo-stp_10.42.42.5(pid=9086): stderr: | �[0;m�[38;5;43m20221214043455285 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214043455285 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214043455285 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214043455286 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214043455286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214043455286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214043455286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:34:56.902578 run osmo-stp_10.42.42.5(pid=9086): stdout: | (launched: 2022-12-14_04:34:55.093371) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:34:57.032483 run osmo-stp_10.42.42.5(pid=9086): stderr: | �[0;m�[38;5;43m20221214043455285 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214043455285 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214043455285 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214043455286 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214043455286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214043455286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214043455286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:34:57.183669 run patchelf(pid=9089): Terminating (SIGINT) 04:34:57.361607 run patchelf(pid=9089): Terminated: ok {rc=0} 04:34:57.393888 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=9086): Process ended prematurely: osmo-stp_10.42.42.5(pid=9086) [trial-2399↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9086)] [trial-2399↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪ping.py:22] 04:34:57.403349 tst ping.py:22: Test FAILED (6.6 sec) 04:34:57.466485 run osmo-hlr_10.42.42.2(pid=9083): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9083)] 04:34:57.517929 run osmo-hlr_10.42.42.2(pid=9083): stdout: | (launched: 2022-12-14_04:34:54.106277) 04:34:57.570224 run osmo-hlr_10.42.42.2(pid=9083): stderr: | �[0;m�[1;31m20221214043454302 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214043454302 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214043454302 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214043454302 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214043454302 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214043454302 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214043454314 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214043454322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214043454322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214043454322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:34:57.614671 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9082): Terminating (SIGTERM) 04:34:57.656633 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9085): Terminating (SIGTERM) 04:34:57.698575 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9088): Terminating (SIGTERM) 04:34:57.708308 --- ParallelTerminationStrategy: PID 9082 died... 04:34:57.764426 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9082): Terminated: ok {rc=0} 04:34:57.774441 --- ParallelTerminationStrategy: PID 9085 died... 04:34:57.830196 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9085): Terminated: ok {rc=0} 04:34:57.840177 --- ParallelTerminationStrategy: PID 9088 died... 04:34:57.896401 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9088): Terminated: ok {rc=0} 04:34:57.981921 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9086): Process ended prematurely: osmo-stp_10.42.42.5(pid=9086) [trial-2399↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9086)]