Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)

Failing for the past 261 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=6708): Process ended prematurely: osmo-stp_10.42.42.5(pid=6708) [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6708)]

Standard Output

----------------------------------------------
trial-2399 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
04:08:22.404434 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
04:08:22.416118 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
04:08:22.573670 tst                        iperf3.py: using LAC 38440
04:08:22.695032 tst                        iperf3.py: using RAC 190
04:08:22.810042 tst                        iperf3.py: using CellId 38440
04:08:22.924414 tst                        iperf3.py: using BVCI 38441
04:08:22.947056 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
04:08:22.958094 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
04:08:22.968873 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
04:08:22.979649 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
04:08:22.990438 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
04:08:23.001151 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
04:08:23.012003 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
04:08:23.022721 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
04:08:23.033570 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
04:08:23.305096 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
04:08:23.427862 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
04:08:23.736455 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6700): Launched
04:08:23.994049 run iperf3-srv_10.42.42.10(pid=6701): Launched
04:08:24.173113 tst                      iperf3.py:8: start network...
04:08:24.295552 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
04:08:24.774626 run          create_hlr_db(pid=6702): Launched
04:08:24.944209 bus                          /gobi_6: Setting Powered False
04:08:25.968185 run          create_hlr_db(pid=6702): Terminated: ok {rc=0}
04:08:26.363558 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6704): Launched
04:08:26.661967 run    osmo-hlr_10.42.42.2(pid=6705): Launched
04:08:26.780447 run              osmo-stp_10.42.42.5: Starting osmo-stp
04:08:27.305628 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6707): Launched
04:08:27.602384 run    osmo-stp_10.42.42.5(pid=6708): Launched
04:08:27.709523 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
04:08:28.231363 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6710): Launched
04:08:28.336806 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
04:08:28.595831 run               patchelf(pid=6711): Launched
04:08:28.769760 run    osmo-stp_10.42.42.5(pid=6708): ERR: Terminated: ERROR {rc=1}  [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6708)]
04:08:28.897077 run    osmo-stp_10.42.42.5(pid=6708): stdout: 
| (launched: 2022-12-14_04:08:27.456251)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
04:08:29.024299 run    osmo-stp_10.42.42.5(pid=6708): stderr: 
| �[0;m�[38;5;43m20221214040827623 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214040827623 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214040827624 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214040827624 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214040827625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214040827625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214040827625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
04:08:29.147707 run    osmo-stp_10.42.42.5(pid=6708): stdout: 
| (launched: 2022-12-14_04:08:27.456251)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
04:08:29.269469 run    osmo-stp_10.42.42.5(pid=6708): stderr: 
| �[0;m�[38;5;43m20221214040827623 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214040827623 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214040827624 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214040827624 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214040827625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214040827625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214040827625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
04:08:29.411024 run               patchelf(pid=6711): Terminating (SIGINT)
04:08:29.577728 run               patchelf(pid=6711): Terminated: ok {rc=0}
04:08:29.608449 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=6708): Process ended prematurely: osmo-stp_10.42.42.5(pid=6708) [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6708)]  [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8]
04:08:29.617766 tst                      iperf3.py:8: Test FAILED (7.2 sec)
04:08:29.677977 run    osmo-hlr_10.42.42.2(pid=6705): ERR: Terminated: ERROR {rc=237}  [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6705)]
04:08:29.726788 run    osmo-hlr_10.42.42.2(pid=6705): stdout: 
| (launched: 2022-12-14_04:08:26.514665) 
04:08:29.776377 run    osmo-hlr_10.42.42.2(pid=6705): stderr: 
| �[0;m�[1;31m20221214040826689 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214040826689 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214040826689 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214040826689 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214040826689 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214040826689 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214040826701 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214040826710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214040826710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214040826710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
04:08:29.818402 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6700): Terminating (SIGTERM)
04:08:29.857619 run iperf3-srv_10.42.42.10(pid=6701): Terminating (SIGTERM)
04:08:29.897085 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6704): Terminating (SIGTERM)
04:08:29.936455 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6707): Terminating (SIGTERM)
04:08:29.975791 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6710): Terminating (SIGTERM)
04:08:29.984472 ---      ParallelTerminationStrategy: PID 6700 died...
04:08:30.038036 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6700): Terminated: ok {rc=0}
04:08:30.047789 ---      ParallelTerminationStrategy: PID 6701 died...
04:08:30.100439 run iperf3-srv_10.42.42.10(pid=6701): Terminated {rc=256}
04:08:30.109841 ---      ParallelTerminationStrategy: PID 6704 died...
04:08:30.162252 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6704): Terminated: ok {rc=0}
04:08:30.171628 ---      ParallelTerminationStrategy: PID 6707 died...
04:08:30.224089 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6707): Terminated: ok {rc=0}
04:08:30.233608 ---      ParallelTerminationStrategy: PID 6710 died...
04:08:30.286028 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6710): Terminated: ok {rc=0}
04:08:30.369111 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6708): Process ended prematurely: osmo-stp_10.42.42.5(pid=6708) [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6708)]