Failed
gprs:nanobts+band-900+mod-bts0-dynts-ipa.ping.py (from gprs_nanobts+band-900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=18945): Process ended prematurely: osmo-stp_10.42.42.5(pid=18945) [trial-2400↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18945)]
Standard Output
---------------------------------------------- trial-2400 gprs:nanobts+band-900+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 06:41:49.411539 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:41:49.423935 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 06:41:49.587645 tst ping.py: using LAC 39107 06:41:49.717372 tst ping.py: using RAC 92 06:41:49.846753 tst ping.py: using CellId 39107 06:41:49.976105 tst ping.py: using BVCI 39108 06:41:50.001731 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:41:50.013269 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:41:50.024498 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:41:50.035731 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:41:50.046983 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:41:50.058287 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:41:50.069666 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:41:50.080800 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 06:41:50.363771 tst ping.py:19: start network... 06:41:50.492894 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:41:50.986923 run create_hlr_db(pid=18939): Launched 06:41:51.166063 bus /gobi_6: Setting Powered False 06:41:52.185703 run create_hlr_db(pid=18939): Terminated: ok {rc=0} 06:41:52.624215 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18941): Launched 06:41:52.955566 run osmo-hlr_10.42.42.2(pid=18942): Launched 06:41:53.080655 run osmo-stp_10.42.42.5: Starting osmo-stp 06:41:53.659662 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18944): Launched 06:41:53.989867 run osmo-stp_10.42.42.5(pid=18945): Launched 06:41:54.109659 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:41:54.686867 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18947): Launched 06:41:54.805674 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:41:55.096463 run patchelf(pid=18948): Launched 06:41:55.290171 run osmo-stp_10.42.42.5(pid=18945): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18945)] 06:41:55.431526 run osmo-stp_10.42.42.5(pid=18945): stdout: | (launched: 2022-12-14_06:41:53.827243) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:41:55.572907 run osmo-stp_10.42.42.5(pid=18945): stderr: | �[0;m�[38;5;43m20221214064154022 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214064154022 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214064154023 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214064154023 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214064154024 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214064154024 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214064154024 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:41:55.709111 run osmo-stp_10.42.42.5(pid=18945): stdout: | (launched: 2022-12-14_06:41:53.827243) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:41:55.844082 run osmo-stp_10.42.42.5(pid=18945): stderr: | �[0;m�[38;5;43m20221214064154022 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214064154022 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214064154023 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214064154023 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214064154024 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214064154024 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214064154024 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:41:56.001447 run patchelf(pid=18948): Terminating (SIGINT) 06:41:56.185842 run patchelf(pid=18948): Terminated: ok {rc=0} 06:41:56.219271 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=18945): Process ended prematurely: osmo-stp_10.42.42.5(pid=18945) [trial-2400↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18945)] [trial-2400↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22] 06:41:56.228471 tst ping.py:22: Test FAILED (6.8 sec) 06:41:56.291935 run osmo-hlr_10.42.42.2(pid=18942): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18942)] 06:41:56.343386 run osmo-hlr_10.42.42.2(pid=18942): stdout: | (launched: 2022-12-14_06:41:52.791754) 06:41:56.395523 run osmo-hlr_10.42.42.2(pid=18942): stderr: | �[0;m�[1;31m20221214064152993 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214064152993 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214064152994 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214064152994 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214064152994 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214064152994 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214064153006 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:nanobts+band-900+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214064153015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214064153015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214064153015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:41:56.440152 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18941): Terminating (SIGTERM) 06:41:56.482433 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18944): Terminating (SIGTERM) 06:41:56.524910 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18947): Terminating (SIGTERM) 06:41:56.534916 --- ParallelTerminationStrategy: PID 18941 died... 06:41:56.591495 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18941): Terminated: ok {rc=0} 06:41:56.601908 --- ParallelTerminationStrategy: PID 18944 died... 06:41:56.658176 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18944): Terminated: ok {rc=0} 06:41:56.668475 --- ParallelTerminationStrategy: PID 18947 died... 06:41:56.724453 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18947): Terminated: ok {rc=0} 06:41:56.811741 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18945): Process ended prematurely: osmo-stp_10.42.42.5(pid=18945) [trial-2400↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18945)]