Failed
gprs:nanobts+band-900+mod-bts0-egprs.iperf3.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=18849): Process ended prematurely: osmo-stp_10.42.42.5(pid=18849) [trial-2400↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18849)]
Standard Output
---------------------------------------------- trial-2400 gprs:nanobts+band-900+mod-bts0-egprs iperf3.py ---------------------------------------------- 06:40:18.582359 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:40:18.594500 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 06:40:18.746340 tst iperf3.py: using LAC 39100 06:40:18.877092 tst iperf3.py: using RAC 85 06:40:19.010390 tst iperf3.py: using CellId 39100 06:40:19.142626 tst iperf3.py: using BVCI 39101 06:40:19.168388 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:40:19.179895 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:40:19.191195 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:40:19.202519 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:40:19.213739 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:40:19.225003 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:40:19.236325 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:40:19.247528 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:40:19.258933 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 06:40:19.560450 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 06:40:19.701762 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:40:20.051707 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18841): Launched 06:40:20.340234 run iperf3-srv_10.42.42.10(pid=18842): Launched 06:40:20.546431 tst iperf3.py:8: start network... 06:40:20.687203 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:40:21.222885 run create_hlr_db(pid=18843): Launched 06:40:21.416865 bus /gobi_6: Setting Powered False 06:40:22.435495 run create_hlr_db(pid=18843): Terminated: ok {rc=0} 06:40:22.855791 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18845): Launched 06:40:23.170287 run osmo-hlr_10.42.42.2(pid=18846): Launched 06:40:23.291815 run osmo-stp_10.42.42.5: Starting osmo-stp 06:40:23.843829 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18848): Launched 06:40:24.157450 run osmo-stp_10.42.42.5(pid=18849): Launched 06:40:24.271980 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:40:24.820411 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18851): Launched 06:40:24.933307 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:40:25.208814 run patchelf(pid=18852): Launched 06:40:25.392445 run osmo-stp_10.42.42.5(pid=18849): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18849)] 06:40:25.526930 run osmo-stp_10.42.42.5(pid=18849): stdout: | (launched: 2022-12-14_06:40:24.002805) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:40:25.662049 run osmo-stp_10.42.42.5(pid=18849): stderr: | �[0;m�[38;5;43m20221214064024176 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214064024177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214064024178 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214064024178 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214064024179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214064024179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214064024179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:40:25.791624 run osmo-stp_10.42.42.5(pid=18849): stdout: | (launched: 2022-12-14_06:40:24.002805) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:40:25.920201 run osmo-stp_10.42.42.5(pid=18849): stderr: | �[0;m�[38;5;43m20221214064024176 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214064024177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214064024178 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214064024178 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214064024179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214064024179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214064024179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:40:26.070036 run patchelf(pid=18852): Terminating (SIGINT) 06:40:26.246264 run patchelf(pid=18852): Terminated: ok {rc=0} 06:40:26.278528 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=18849): Process ended prematurely: osmo-stp_10.42.42.5(pid=18849) [trial-2400↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18849)] [trial-2400↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8] 06:40:26.287925 tst iperf3.py:8: Test FAILED (7.7 sec) 06:40:26.348627 run osmo-hlr_10.42.42.2(pid=18846): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18846)] 06:40:26.398216 run osmo-hlr_10.42.42.2(pid=18846): stdout: | (launched: 2022-12-14_06:40:23.015376) 06:40:26.448153 run osmo-hlr_10.42.42.2(pid=18846): stderr: | �[0;m�[1;31m20221214064023196 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214064023196 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214064023196 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214064023196 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214064023196 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214064023196 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214064023208 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:nanobts+band-900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214064023217 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214064023217 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214064023217 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:40:26.490694 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18841): Terminating (SIGTERM) 06:40:26.530783 run iperf3-srv_10.42.42.10(pid=18842): Terminating (SIGTERM) 06:40:26.570696 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18845): Terminating (SIGTERM) 06:40:26.610629 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18848): Terminating (SIGTERM) 06:40:26.650683 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18851): Terminating (SIGTERM) 06:40:26.660022 --- ParallelTerminationStrategy: PID 18841 died... 06:40:26.714018 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18841): Terminated: ok {rc=0} 06:40:26.723628 --- ParallelTerminationStrategy: PID 18842 died... 06:40:26.777222 run iperf3-srv_10.42.42.10(pid=18842): Terminated {rc=256} 06:40:26.786791 --- ParallelTerminationStrategy: PID 18845 died... 06:40:26.840663 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18845): Terminated: ok {rc=0} 06:40:26.850344 --- ParallelTerminationStrategy: PID 18848 died... 06:40:26.903828 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18848): Terminated: ok {rc=0} 06:40:26.913836 --- ParallelTerminationStrategy: PID 18851 died... 06:40:26.967467 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18851): Terminated: ok {rc=0} 06:40:27.056330 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18849): Process ended prematurely: osmo-stp_10.42.42.5(pid=18849) [trial-2400↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18849)]