Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:sysmo.ping_idle_ping.py (from gprs_sysmo)

Failing for the past 70 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=12377): Process ended prematurely: osmo-stp_10.42.42.5(pid=12377) [trial-2400↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12377)]

Standard Output

----------------------------------------------
trial-2400 gprs:sysmo ping_idle_ping.py
----------------------------------------------
05:35:10.263652 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
05:35:10.275092 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
05:35:10.408599 tst                ping_idle_ping.py: using LAC 38759
05:35:10.541517 tst                ping_idle_ping.py: using RAC 254
05:35:10.673698 tst                ping_idle_ping.py: using CellId 38759
05:35:10.806183 tst                ping_idle_ping.py: using BVCI 38760
05:35:10.831873 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
05:35:10.843194 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
05:35:10.854363 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
05:35:10.865434 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
05:35:10.876276 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
05:35:10.887330 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
05:35:10.898394 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
05:35:10.909426 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
05:35:11.202086 tst             ping_idle_ping.py:24: start network...
05:35:11.332047 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
05:35:11.819185 run         create_hlr_db(pid=12371): Launched
05:35:11.996906 bus                          /gobi_6: Setting Powered False
05:35:13.018990 run         create_hlr_db(pid=12371): Terminated: ok {rc=0}
05:35:13.457786 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12373): Launched
05:35:13.782994 run   osmo-hlr_10.42.42.2(pid=12374): Launched
05:35:13.904637 run              osmo-stp_10.42.42.5: Starting osmo-stp
05:35:14.447283 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12376): Launched
05:35:14.757088 run   osmo-stp_10.42.42.5(pid=12377): Launched
05:35:14.870866 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
05:35:15.411651 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12379): Launched
05:35:15.522777 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
05:35:15.792864 run              patchelf(pid=12380): Launched
05:35:15.978187 run   osmo-stp_10.42.42.5(pid=12377): ERR: Terminated: ERROR {rc=1}  [trial-2400↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12377)]
05:35:16.114762 run   osmo-stp_10.42.42.5(pid=12377): stdout: 
| (launched: 2022-12-14_05:35:14.604405)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
05:35:16.251184 run   osmo-stp_10.42.42.5(pid=12377): stderr: 
| �[0;m�[38;5;43m20221214053514776 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214053514776 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214053514777 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214053514777 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214053514777 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214053514778 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214053514778 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
05:35:16.382908 run   osmo-stp_10.42.42.5(pid=12377): stdout: 
| (launched: 2022-12-14_05:35:14.604405)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
05:35:16.513567 run   osmo-stp_10.42.42.5(pid=12377): stderr: 
| �[0;m�[38;5;43m20221214053514776 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214053514776 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214053514777 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214053514777 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214053514777 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214053514778 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214053514778 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
05:35:16.665116 run              patchelf(pid=12380): Terminating (SIGINT)
05:35:16.843723 run              patchelf(pid=12380): Terminated: ok {rc=0}
05:35:16.876561 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=12377): Process ended prematurely: osmo-stp_10.42.42.5(pid=12377) [trial-2400↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12377)]  [trial-2400↪gprs:sysmo↪ping_idle_ping.py:27]
05:35:16.886341 tst             ping_idle_ping.py:27: Test FAILED (6.6 sec)
05:35:16.949704 run   osmo-hlr_10.42.42.2(pid=12374): ERR: Terminated: ERROR {rc=237}  [trial-2400↪gprs:sysmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12374)]
05:35:17.000787 run   osmo-hlr_10.42.42.2(pid=12374): stdout: 
| (launched: 2022-12-14_05:35:13.625837) 
05:35:17.052817 run   osmo-hlr_10.42.42.2(pid=12374): stderr: 
| �[0;m�[1;31m20221214053513807 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214053513807 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214053513807 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214053513807 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214053513807 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214053513807 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214053513821 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:sysmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214053513830 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214053513830 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214053513830 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
05:35:17.097527 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12373): Terminating (SIGTERM)
05:35:17.141018 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12376): Terminating (SIGTERM)
05:35:17.182926 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12379): Terminating (SIGTERM)
05:35:17.192502 ---      ParallelTerminationStrategy: PID 12373 died...
05:35:17.248855 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12373): Terminated: ok {rc=0}
05:35:17.258529 ---      ParallelTerminationStrategy: PID 12376 died...
05:35:17.312099 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12376): Terminated: ok {rc=0}
05:35:17.321757 ---      ParallelTerminationStrategy: PID 12379 died...
05:35:17.375481 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12379): Terminated: ok {rc=0}
05:35:17.458632 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12377): Process ended prematurely: osmo-stp_10.42.42.5(pid=12377) [trial-2400↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12377)]