Failed
gprs:trx-b200.ping_idle_ping.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=14356): Process ended prematurely: osmo-stp_10.42.42.5(pid=14356) [trial-2400↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14356)]
Standard Output
---------------------------------------------- trial-2400 gprs:trx-b200 ping_idle_ping.py ---------------------------------------------- 05:51:51.946695 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:51:51.958567 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 05:51:52.111283 tst ping_idle_ping.py: using LAC 38847 05:51:52.239384 tst ping_idle_ping.py: using RAC 87 05:51:52.369476 tst ping_idle_ping.py: using CellId 38847 05:51:52.502892 tst ping_idle_ping.py: using BVCI 38848 05:51:52.528410 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:51:52.539652 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:51:52.550796 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:51:52.561890 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:51:52.573478 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:51:52.584892 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:51:52.596448 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:51:52.607963 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 05:51:52.905351 tst ping_idle_ping.py:24: start network... 05:51:53.043756 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:51:53.573758 run create_hlr_db(pid=14350): Launched 05:51:53.765501 bus /gobi_6: Setting Powered False 05:51:54.785975 run create_hlr_db(pid=14350): Terminated: ok {rc=0} 05:51:55.202894 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14352): Launched 05:51:55.513753 run osmo-hlr_10.42.42.2(pid=14353): Launched 05:51:55.633999 run osmo-stp_10.42.42.5: Starting osmo-stp 05:51:56.176485 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14355): Launched 05:51:56.486311 run osmo-stp_10.42.42.5(pid=14356): Launched 05:51:56.601515 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:51:57.140349 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14358): Launched 05:51:57.251180 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:51:57.523049 run patchelf(pid=14359): Launched 05:51:57.704653 run osmo-stp_10.42.42.5(pid=14356): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14356)] 05:51:57.837498 run osmo-stp_10.42.42.5(pid=14356): stdout: | (launched: 2022-12-14_05:51:56.333616) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:51:57.970442 run osmo-stp_10.42.42.5(pid=14356): stderr: | �[0;m�[38;5;43m20221214055156504 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214055156504 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214055156504 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214055156505 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214055156505 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214055156505 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214055156505 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:51:58.098627 run osmo-stp_10.42.42.5(pid=14356): stdout: | (launched: 2022-12-14_05:51:56.333616) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:51:58.225714 run osmo-stp_10.42.42.5(pid=14356): stderr: | �[0;m�[38;5;43m20221214055156504 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214055156504 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214055156504 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214055156505 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214055156505 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214055156505 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214055156505 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:51:58.374128 run patchelf(pid=14359): Terminating (SIGINT) 05:51:58.547424 run patchelf(pid=14359): Terminated: ok {rc=0} 05:51:58.578798 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=14356): Process ended prematurely: osmo-stp_10.42.42.5(pid=14356) [trial-2400↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14356)] [trial-2400↪gprs:trx-b200↪ping_idle_ping.py:27] 05:51:58.587772 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 05:51:58.648850 run osmo-hlr_10.42.42.2(pid=14353): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:trx-b200↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14353)] 05:51:58.699290 run osmo-hlr_10.42.42.2(pid=14353): stdout: | (launched: 2022-12-14_05:51:55.361232) 05:51:58.749949 run osmo-hlr_10.42.42.2(pid=14353): stderr: | �[0;m�[1;31m20221214055155538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214055155538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214055155538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214055155538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214055155538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214055155538 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214055155550 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:trx-b200/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214055155558 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214055155558 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214055155558 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:51:58.793255 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14352): Terminating (SIGTERM) 05:51:58.834018 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14355): Terminating (SIGTERM) 05:51:58.874606 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14358): Terminating (SIGTERM) 05:51:58.883970 --- ParallelTerminationStrategy: PID 14352 died... 05:51:58.939162 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14352): Terminated: ok {rc=0} 05:51:58.949006 --- ParallelTerminationStrategy: PID 14355 died... 05:51:59.003353 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14355): Terminated: ok {rc=0} 05:51:59.013193 --- ParallelTerminationStrategy: PID 14358 died... 05:51:59.067409 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14358): Terminated: ok {rc=0} 05:51:59.152511 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14356): Process ended prematurely: osmo-stp_10.42.42.5(pid=14356) [trial-2400↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14356)]