Failed
gprs:trx-lms+mod-bts0-dynts-ipa.ping.py (from gprs_trx-lms+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=16874): Process ended prematurely: osmo-stp_10.42.42.5(pid=16874) [trial-2400↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16874)]
Standard Output
---------------------------------------------- trial-2400 gprs:trx-lms+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 06:20:11.808049 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:20:11.820403 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 06:20:11.988758 tst ping.py: using LAC 38994 06:20:12.117174 tst ping.py: using RAC 234 06:20:12.245006 tst ping.py: using CellId 38994 06:20:12.363951 tst ping.py: using BVCI 38995 06:20:12.387574 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:20:12.398606 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:20:12.409580 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:20:12.420395 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:20:12.431405 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:20:12.442587 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:20:12.453701 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:20:12.464630 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 06:20:12.761937 tst ping.py:19: start network... 06:20:12.898765 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:20:13.408487 run create_hlr_db(pid=16868): Launched 06:20:13.586550 bus /gobi_6: Setting Powered False 06:20:14.607023 run create_hlr_db(pid=16868): Terminated: ok {rc=0} 06:20:15.043154 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16870): Launched 06:20:15.372842 run osmo-hlr_10.42.42.2(pid=16871): Launched 06:20:15.494186 run osmo-stp_10.42.42.5: Starting osmo-stp 06:20:16.095770 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16873): Launched 06:20:16.524205 run osmo-stp_10.42.42.5(pid=16874): Launched 06:20:16.670788 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:20:17.286464 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16876): Launched 06:20:17.404351 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:20:17.690702 run patchelf(pid=16877): Launched 06:20:17.881990 run osmo-stp_10.42.42.5(pid=16874): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16874)] 06:20:18.021365 run osmo-stp_10.42.42.5(pid=16874): stdout: | (launched: 2022-12-14_06:20:16.264721) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:20:18.162117 run osmo-stp_10.42.42.5(pid=16874): stderr: | �[0;m�[38;5;43m20221214062016578 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214062016579 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214062016579 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214062016579 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214062016580 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214062016580 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214062016580 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:20:18.297056 run osmo-stp_10.42.42.5(pid=16874): stdout: | (launched: 2022-12-14_06:20:16.264721) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:20:18.431081 run osmo-stp_10.42.42.5(pid=16874): stderr: | �[0;m�[38;5;43m20221214062016578 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214062016579 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214062016579 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214062016579 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214062016580 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214062016580 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214062016580 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:20:18.585962 run patchelf(pid=16877): Terminating (SIGINT) 06:20:18.767955 run patchelf(pid=16877): Terminated: ok {rc=0} 06:20:18.801383 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=16874): Process ended prematurely: osmo-stp_10.42.42.5(pid=16874) [trial-2400↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16874)] [trial-2400↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping.py:22] 06:20:18.810759 tst ping.py:22: Test FAILED (7.0 sec) 06:20:18.874278 run osmo-hlr_10.42.42.2(pid=16871): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16871)] 06:20:18.926091 run osmo-hlr_10.42.42.2(pid=16871): stdout: | (launched: 2022-12-14_06:20:15.209805) 06:20:18.978665 run osmo-hlr_10.42.42.2(pid=16871): stderr: | �[0;m�[1;31m20221214062015409 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214062015410 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214062015410 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214062015410 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214062015410 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214062015410 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214062015422 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:trx-lms+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214062015430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214062015431 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214062015431 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:20:19.023662 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16870): Terminating (SIGTERM) 06:20:19.066670 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16873): Terminating (SIGTERM) 06:20:19.109159 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16876): Terminating (SIGTERM) 06:20:19.119040 --- ParallelTerminationStrategy: PID 16870 died... 06:20:19.175617 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16870): Terminated: ok {rc=0} 06:20:19.186003 --- ParallelTerminationStrategy: PID 16873 died... 06:20:19.242286 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16873): Terminated: ok {rc=0} 06:20:19.252497 --- ParallelTerminationStrategy: PID 16876 died... 06:20:19.308798 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16876): Terminated: ok {rc=0} 06:20:19.395966 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16874): Process ended prematurely: osmo-stp_10.42.42.5(pid=16874) [trial-2400↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16874)]