Failed
gprs:trx-sysmocell5000.ping_idle_ping.py (from gprs_trx-sysmocell5000)
Stacktrace
osmo-stp_10.42.42.5(pid=15272): Process ended prematurely: osmo-stp_10.42.42.5(pid=15272) [trial-2400↪gprs:trx-sysmocell5000↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15272)]
Standard Output
---------------------------------------------- trial-2400 gprs:trx-sysmocell5000 ping_idle_ping.py ---------------------------------------------- 06:00:55.068389 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 06:00:55.080455 tst gprs:trx-sysmocell5000: Using 1 x bts (candidates: 1) 06:00:55.229278 tst ping_idle_ping.py: using LAC 38894 06:00:55.361092 tst ping_idle_ping.py: using RAC 134 06:00:55.490644 tst ping_idle_ping.py: using CellId 38894 06:00:55.621115 tst ping_idle_ping.py: using BVCI 38895 06:00:55.646640 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 06:00:55.658109 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 06:00:55.669930 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 06:00:55.681327 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 06:00:55.692627 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 06:00:55.704040 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 06:00:55.715619 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 06:00:55.727014 tst gprs:trx-sysmocell5000: Using 1 x modem (candidates: 4) 06:00:56.023885 tst ping_idle_ping.py:24: start network... 06:00:56.161939 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:00:56.689912 run create_hlr_db(pid=15266): Launched 06:00:56.882152 bus /gobi_6: Setting Powered False 06:00:57.902707 run create_hlr_db(pid=15266): Terminated: ok {rc=0} 06:00:58.317788 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15268): Launched 06:00:58.628715 run osmo-hlr_10.42.42.2(pid=15269): Launched 06:00:58.747306 run osmo-stp_10.42.42.5: Starting osmo-stp 06:00:59.284125 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15271): Launched 06:00:59.593914 run osmo-stp_10.42.42.5(pid=15272): Launched 06:00:59.707074 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:01:00.244345 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15274): Launched 06:01:00.354642 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:01:00.623962 run patchelf(pid=15275): Launched 06:01:00.804418 run osmo-stp_10.42.42.5(pid=15272): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:trx-sysmocell5000↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15272)] 06:01:00.969388 run osmo-stp_10.42.42.5(pid=15272): stdout: | (launched: 2022-12-14_06:00:59.440615) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:01:01.114938 run osmo-stp_10.42.42.5(pid=15272): stderr: | �[0;m�[38;5;43m20221214060059612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214060059612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214060059612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214060059613 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214060059613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214060059613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214060059613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:01:01.255135 run osmo-stp_10.42.42.5(pid=15272): stdout: | (launched: 2022-12-14_06:00:59.440615) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:01:01.394907 run osmo-stp_10.42.42.5(pid=15272): stderr: | �[0;m�[38;5;43m20221214060059612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214060059612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214060059612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214060059613 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214060059613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214060059613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214060059613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:01:01.557060 run patchelf(pid=15275): Terminating (SIGINT) 06:01:01.749292 run patchelf(pid=15275): Terminated: ok {rc=0} 06:01:01.784804 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=15272): Process ended prematurely: osmo-stp_10.42.42.5(pid=15272) [trial-2400↪gprs:trx-sysmocell5000↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15272)] [trial-2400↪gprs:trx-sysmocell5000↪ping_idle_ping.py:27] 06:01:01.795423 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 06:01:01.862184 run osmo-hlr_10.42.42.2(pid=15269): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:trx-sysmocell5000↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15269)] 06:01:01.915979 run osmo-hlr_10.42.42.2(pid=15269): stdout: | (launched: 2022-12-14_06:00:58.474924) 06:01:01.970074 run osmo-hlr_10.42.42.2(pid=15269): stderr: | �[0;m�[1;31m20221214060058652 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214060058652 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214060058652 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214060058652 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214060058652 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214060058652 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214060058665 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:trx-sysmocell5000/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214060058673 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214060058673 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214060058673 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:01:02.016928 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15268): Terminating (SIGTERM) 06:01:02.064112 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15271): Terminating (SIGTERM) 06:01:02.108722 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15274): Terminating (SIGTERM) 06:01:02.120272 --- ParallelTerminationStrategy: PID 15268 died... 06:01:02.179992 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15268): Terminated: ok {rc=0} 06:01:02.190447 --- ParallelTerminationStrategy: PID 15271 died... 06:01:02.247032 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15271): Terminated: ok {rc=0} 06:01:02.257500 --- ParallelTerminationStrategy: PID 15274 died... 06:01:02.314314 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15274): Terminated: ok {rc=0} 06:01:02.402131 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15272): Process ended prematurely: osmo-stp_10.42.42.5(pid=15272) [trial-2400↪gprs:trx-sysmocell5000↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15272)]