Failed
gprs:trx-umtrx+mod-bts0-egprs.iperf3.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=16149): Process ended prematurely: osmo-stp_10.42.42.5(pid=16149) [trial-2400↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16149)]
Standard Output
---------------------------------------------- trial-2400 gprs:trx-umtrx+mod-bts0-egprs iperf3.py ---------------------------------------------- 06:09:38.858992 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:09:38.871339 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 06:09:39.024447 tst iperf3.py: using LAC 38940 06:09:39.155885 tst iperf3.py: using RAC 180 06:09:39.287116 tst iperf3.py: using CellId 38940 06:09:39.416135 tst iperf3.py: using BVCI 38941 06:09:39.440374 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:09:39.451599 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:09:39.462587 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:09:39.473942 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:09:39.485422 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:09:39.496745 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:09:39.508437 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:09:39.519854 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:09:39.531680 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 06:09:39.823068 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 06:09:39.955952 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:09:40.284873 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16141): Launched 06:09:40.558627 run iperf3-srv_10.42.42.10(pid=16142): Launched 06:09:40.751907 tst iperf3.py:8: start network... 06:09:40.884413 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:09:41.379304 run create_hlr_db(pid=16143): Launched 06:09:41.560784 bus /gobi_6: Setting Powered False 06:09:42.580557 run create_hlr_db(pid=16143): Terminated: ok {rc=0} 06:09:43.027227 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16145): Launched 06:09:43.364127 run osmo-hlr_10.42.42.2(pid=16146): Launched 06:09:43.492044 run osmo-stp_10.42.42.5: Starting osmo-stp 06:09:44.084548 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16148): Launched 06:09:44.420707 run osmo-stp_10.42.42.5(pid=16149): Launched 06:09:44.543417 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:09:45.128287 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16151): Launched 06:09:45.249074 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:09:45.541535 run patchelf(pid=16152): Launched 06:09:45.736529 run osmo-stp_10.42.42.5(pid=16149): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16149)] 06:09:45.890538 run osmo-stp_10.42.42.5(pid=16149): stdout: | (launched: 2022-12-14_06:09:44.255550) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:09:46.053020 run osmo-stp_10.42.42.5(pid=16149): stderr: | �[0;m�[38;5;43m20221214060944450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214060944450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214060944451 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214060944451 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214060944452 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214060944452 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214060944452 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:09:46.195492 run osmo-stp_10.42.42.5(pid=16149): stdout: | (launched: 2022-12-14_06:09:44.255550) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:09:46.336826 run osmo-stp_10.42.42.5(pid=16149): stderr: | �[0;m�[38;5;43m20221214060944450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214060944450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214060944451 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214060944451 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214060944452 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214060944452 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214060944452 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:09:46.501791 run patchelf(pid=16152): Terminating (SIGINT) 06:09:46.695167 run patchelf(pid=16152): Terminated: ok {rc=0} 06:09:46.730648 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=16149): Process ended prematurely: osmo-stp_10.42.42.5(pid=16149) [trial-2400↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16149)] [trial-2400↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8] 06:09:46.741880 tst iperf3.py:8: Test FAILED (7.9 sec) 06:09:46.806252 run osmo-hlr_10.42.42.2(pid=16146): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16146)] 06:09:46.859129 run osmo-hlr_10.42.42.2(pid=16146): stdout: | (launched: 2022-12-14_06:09:43.198411) 06:09:46.912435 run osmo-hlr_10.42.42.2(pid=16146): stderr: | �[0;m�[1;31m20221214060943400 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214060943400 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214060943400 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214060943400 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214060943400 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214060943400 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214060943413 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:trx-umtrx+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214060943423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214060943423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214060943423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:09:46.958185 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16141): Terminating (SIGTERM) 06:09:47.003073 run iperf3-srv_10.42.42.10(pid=16142): Terminating (SIGTERM) 06:09:47.048404 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16145): Terminating (SIGTERM) 06:09:47.091262 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16148): Terminating (SIGTERM) 06:09:47.133703 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16151): Terminating (SIGTERM) 06:09:47.143571 --- ParallelTerminationStrategy: PID 16141 died... 06:09:47.200288 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16141): Terminated: ok {rc=0} 06:09:47.210599 --- ParallelTerminationStrategy: PID 16142 died... 06:09:47.266247 run iperf3-srv_10.42.42.10(pid=16142): Terminated {rc=256} 06:09:47.276409 --- ParallelTerminationStrategy: PID 16145 died... 06:09:47.332241 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16145): Terminated: ok {rc=0} 06:09:47.342411 --- ParallelTerminationStrategy: PID 16148 died... 06:09:47.398252 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16148): Terminated: ok {rc=0} 06:09:47.408301 --- ParallelTerminationStrategy: PID 16151 died... 06:09:47.464153 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16151): Terminated: ok {rc=0} 06:09:47.550964 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16149): Process ended prematurely: osmo-stp_10.42.42.5(pid=16149) [trial-2400↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16149)]