Failed
gprs:oc2g+mod-bts0-dynts-ipa.iperf3.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=13315): Process ended prematurely: osmo-stp_10.42.42.5(pid=13315) [trial-2400↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13315)]
Standard Output
---------------------------------------------- trial-2400 gprs:oc2g+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 05:44:35.616773 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:44:35.628758 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 05:44:35.786860 tst iperf3.py: using LAC 38808 05:44:35.916744 tst iperf3.py: using RAC 48 05:44:36.046718 tst iperf3.py: using CellId 38808 05:44:36.176869 tst iperf3.py: using BVCI 38809 05:44:36.202584 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:44:36.213978 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:44:36.225038 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:44:36.236067 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:44:36.247097 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:44:36.258330 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:44:36.270055 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:44:36.281129 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 05:44:36.292307 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 05:44:36.579055 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 05:44:36.711309 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:44:37.037450 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13307): Launched 05:44:37.308332 run iperf3-srv_10.42.42.10(pid=13308): Launched 05:44:37.500650 tst iperf3.py:8: start network... 05:44:37.632161 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:44:38.126240 run create_hlr_db(pid=13309): Launched 05:44:38.307564 bus /gobi_6: Setting Powered False 05:44:39.328152 run create_hlr_db(pid=13309): Terminated: ok {rc=0} 05:44:39.770196 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13311): Launched 05:44:40.104470 run osmo-hlr_10.42.42.2(pid=13312): Launched 05:44:40.226504 run osmo-stp_10.42.42.5: Starting osmo-stp 05:44:40.805449 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13314): Launched 05:44:41.137487 run osmo-stp_10.42.42.5(pid=13315): Launched 05:44:41.258310 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:44:41.838198 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13317): Launched 05:44:41.957347 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:44:42.246404 run patchelf(pid=13318): Launched 05:44:42.440425 run osmo-stp_10.42.42.5(pid=13315): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13315)] 05:44:42.582725 run osmo-stp_10.42.42.5(pid=13315): stdout: | (launched: 2022-12-14_05:44:40.974244) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:44:42.725029 run osmo-stp_10.42.42.5(pid=13315): stderr: | �[0;m�[38;5;43m20221214054441166 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214054441167 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214054441167 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214054441167 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214054441168 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214054441168 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214054441168 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:44:42.862492 run osmo-stp_10.42.42.5(pid=13315): stdout: | (launched: 2022-12-14_05:44:40.974244) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:44:42.998228 run osmo-stp_10.42.42.5(pid=13315): stderr: | �[0;m�[38;5;43m20221214054441166 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214054441167 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214054441167 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214054441167 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214054441168 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214054441168 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214054441168 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:44:43.156350 run patchelf(pid=13318): Terminating (SIGINT) 05:44:43.342868 run patchelf(pid=13318): Terminated: ok {rc=0} 05:44:43.376906 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=13315): Process ended prematurely: osmo-stp_10.42.42.5(pid=13315) [trial-2400↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13315)] [trial-2400↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8] 05:44:43.386932 tst iperf3.py:8: Test FAILED (7.8 sec) 05:44:43.449710 run osmo-hlr_10.42.42.2(pid=13312): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13312)] 05:44:43.501491 run osmo-hlr_10.42.42.2(pid=13312): stdout: | (launched: 2022-12-14_05:44:39.940281) 05:44:43.553722 run osmo-hlr_10.42.42.2(pid=13312): stderr: | �[0;m�[1;31m20221214054440139 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214054440139 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214054440139 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214054440139 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214054440139 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214054440139 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214054440151 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:oc2g+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214054440160 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214054440160 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214054440160 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:44:43.598188 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13307): Terminating (SIGTERM) 05:44:43.639980 run iperf3-srv_10.42.42.10(pid=13308): Terminating (SIGTERM) 05:44:43.682119 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13311): Terminating (SIGTERM) 05:44:43.724350 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13314): Terminating (SIGTERM) 05:44:43.766682 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13317): Terminating (SIGTERM) 05:44:43.776272 --- ParallelTerminationStrategy: PID 13307 died... 05:44:43.833242 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13307): Terminated: ok {rc=0} 05:44:43.843465 --- ParallelTerminationStrategy: PID 13308 died... 05:44:43.899440 run iperf3-srv_10.42.42.10(pid=13308): Terminated {rc=256} 05:44:43.909440 --- ParallelTerminationStrategy: PID 13311 died... 05:44:43.965250 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13311): Terminated: ok {rc=0} 05:44:43.975233 --- ParallelTerminationStrategy: PID 13314 died... 05:44:44.031054 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13314): Terminated: ok {rc=0} 05:44:44.041282 --- ParallelTerminationStrategy: PID 13317 died... 05:44:44.097488 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13317): Terminated: ok {rc=0} 05:44:44.185325 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13315): Process ended prematurely: osmo-stp_10.42.42.5(pid=13315) [trial-2400↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13315)]