Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo.ping.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=17807): Process ended prematurely: osmo-stp_10.42.42.5(pid=17807) [trial-2400↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17807)]
Standard Output
---------------------------------------------- trial-2400 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo ping.py ---------------------------------------------- 06:29:15.461442 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:29:15.473840 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 06:29:15.637902 tst ping.py: using LAC 39041 06:29:15.766210 tst ping.py: using RAC 26 06:29:15.912427 tst ping.py: using CellId 39041 06:29:16.056643 tst ping.py: using BVCI 39042 06:29:16.081913 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:29:16.094252 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:29:16.106402 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:29:16.118587 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:29:16.132020 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:29:16.145395 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:29:16.160853 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:29:16.174152 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 06:29:16.519360 tst ping.py:19: start network... 06:29:16.689380 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:29:17.250828 run create_hlr_db(pid=17801): Launched 06:29:17.440279 bus /gobi_6: Setting Powered False 06:29:18.459778 run create_hlr_db(pid=17801): Terminated: ok {rc=0} 06:29:18.870640 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17803): Launched 06:29:19.177885 run osmo-hlr_10.42.42.2(pid=17804): Launched 06:29:19.298030 run osmo-stp_10.42.42.5: Starting osmo-stp 06:29:19.836779 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17806): Launched 06:29:20.144109 run osmo-stp_10.42.42.5(pid=17807): Launched 06:29:20.256300 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:29:20.790642 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17809): Launched 06:29:20.900728 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:29:21.168925 run patchelf(pid=17810): Launched 06:29:21.348154 run osmo-stp_10.42.42.5(pid=17807): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17807)] 06:29:21.479309 run osmo-stp_10.42.42.5(pid=17807): stdout: | (launched: 2022-12-14_06:29:19.991984) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:29:21.611013 run osmo-stp_10.42.42.5(pid=17807): stderr: | �[0;m�[38;5;43m20221214062920162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214062920162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214062920162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214062920163 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214062920163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214062920163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214062920163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:29:21.737628 run osmo-stp_10.42.42.5(pid=17807): stdout: | (launched: 2022-12-14_06:29:19.991984) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:29:21.863179 run osmo-stp_10.42.42.5(pid=17807): stderr: | �[0;m�[38;5;43m20221214062920162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214062920162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214062920162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214062920163 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214062920163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214062920163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214062920163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:29:22.008787 run patchelf(pid=17810): Terminating (SIGINT) 06:29:22.180611 run patchelf(pid=17810): Terminated: ok {rc=0} 06:29:22.211788 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=17807): Process ended prematurely: osmo-stp_10.42.42.5(pid=17807) [trial-2400↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17807)] [trial-2400↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪ping.py:22] 06:29:22.220653 tst ping.py:22: Test FAILED (6.7 sec) 06:29:22.280792 run osmo-hlr_10.42.42.2(pid=17804): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17804)] 06:29:22.329905 run osmo-hlr_10.42.42.2(pid=17804): stdout: | (launched: 2022-12-14_06:29:19.026255) 06:29:22.379717 run osmo-hlr_10.42.42.2(pid=17804): stderr: | �[0;m�[1;31m20221214062919202 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214062919202 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214062919202 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214062919202 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214062919202 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214062919202 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214062919214 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214062919222 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214062919222 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214062919222 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:29:22.422112 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17803): Terminating (SIGTERM) 06:29:22.462134 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17806): Terminating (SIGTERM) 06:29:22.502672 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17809): Terminating (SIGTERM) 06:29:22.512075 --- ParallelTerminationStrategy: PID 17803 died... 06:29:22.566579 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17803): Terminated: ok {rc=0} 06:29:22.576316 --- ParallelTerminationStrategy: PID 17806 died... 06:29:22.630710 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17806): Terminated: ok {rc=0} 06:29:22.640371 --- ParallelTerminationStrategy: PID 17809 died... 06:29:22.694862 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17809): Terminated: ok {rc=0} 06:29:22.784486 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17807): Process ended prematurely: osmo-stp_10.42.42.5(pid=17807) [trial-2400↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17807)]