Failed
gprs:trx-lms-limenet-micro+mod-bts0-egprs.ping.py (from gprs_trx-lms-limenet-micro+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=17671): Process ended prematurely: osmo-stp_10.42.42.5(pid=17671) [trial-2400↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17671)]
Standard Output
---------------------------------------------- trial-2400 gprs:trx-lms-limenet-micro+mod-bts0-egprs ping.py ---------------------------------------------- 06:27:12.538752 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:27:12.551478 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x bts (candidates: 1) 06:27:12.694753 tst ping.py: using LAC 39031 06:27:12.824760 tst ping.py: using RAC 16 06:27:12.951431 tst ping.py: using CellId 39031 06:27:13.075201 tst ping.py: using BVCI 39032 06:27:13.098847 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:27:13.110038 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:27:13.121029 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:27:13.131991 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:27:13.143673 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:27:13.155307 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:27:13.167110 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:27:13.178874 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x modem (candidates: 4) 06:27:13.475106 tst ping.py:19: start network... 06:27:13.612249 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:27:14.130796 run create_hlr_db(pid=17665): Launched 06:27:14.318928 bus /gobi_6: Setting Powered False 06:27:15.340717 run create_hlr_db(pid=17665): Terminated: ok {rc=0} 06:27:15.751968 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17667): Launched 06:27:16.246914 run osmo-hlr_10.42.42.2(pid=17668): Launched 06:27:16.420869 run osmo-stp_10.42.42.5: Starting osmo-stp 06:27:16.989804 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17670): Launched 06:27:17.362484 run osmo-stp_10.42.42.5(pid=17671): Launched 06:27:17.478608 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:27:18.024913 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17673): Launched 06:27:18.142343 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:27:18.426129 run patchelf(pid=17674): Launched 06:27:18.617488 run osmo-stp_10.42.42.5(pid=17671): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17671)] 06:27:18.757432 run osmo-stp_10.42.42.5(pid=17671): stdout: | (launched: 2022-12-14_06:27:17.148267) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:27:18.897348 run osmo-stp_10.42.42.5(pid=17671): stderr: | �[0;m�[38;5;43m20221214062717390 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214062717390 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214062717390 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214062717391 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214062717391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214062717391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214062717391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:27:19.032464 run osmo-stp_10.42.42.5(pid=17671): stdout: | (launched: 2022-12-14_06:27:17.148267) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:27:19.166186 run osmo-stp_10.42.42.5(pid=17671): stderr: | �[0;m�[38;5;43m20221214062717390 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214062717390 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214062717390 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214062717391 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214062717391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214062717391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214062717391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:27:19.321732 run patchelf(pid=17674): Terminating (SIGINT) 06:27:19.503942 run patchelf(pid=17674): Terminated: ok {rc=0} 06:27:19.537161 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=17671): Process ended prematurely: osmo-stp_10.42.42.5(pid=17671) [trial-2400↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17671)] [trial-2400↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py:22] 06:27:19.547103 tst ping.py:22: Test FAILED (7.0 sec) 06:27:19.610854 run osmo-hlr_10.42.42.2(pid=17668): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17668)] 06:27:19.662940 run osmo-hlr_10.42.42.2(pid=17668): stdout: | (launched: 2022-12-14_06:27:15.932509) 06:27:19.715931 run osmo-hlr_10.42.42.2(pid=17668): stderr: | �[0;m�[1;31m20221214062716165 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214062716165 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214062716165 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214062716165 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214062716165 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214062716165 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214062716180 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:trx-lms-limenet-micro+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214062716193 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214062716193 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214062716193 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:27:19.761087 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17667): Terminating (SIGTERM) 06:27:19.803570 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17670): Terminating (SIGTERM) 06:27:19.846158 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17673): Terminating (SIGTERM) 06:27:19.855994 --- ParallelTerminationStrategy: PID 17667 died... 06:27:19.912866 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17667): Terminated: ok {rc=0} 06:27:19.923158 --- ParallelTerminationStrategy: PID 17670 died... 06:27:19.979837 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17670): Terminated: ok {rc=0} 06:27:19.990108 --- ParallelTerminationStrategy: PID 17673 died... 06:27:20.046634 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17673): Terminated: ok {rc=0} 06:27:20.135935 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17671): Process ended prematurely: osmo-stp_10.42.42.5(pid=17671) [trial-2400↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17671)]