Failed
gprs:nanobts+band-900+mod-bts0-egprs.iperf3.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=26632): Process ended prematurely: osmo-stp_10.42.42.5(pid=26632) [trial-2401↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26632)]
Standard Output
---------------------------------------------- trial-2401 gprs:nanobts+band-900+mod-bts0-egprs iperf3.py ---------------------------------------------- 08:08:24.993750 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:08:25.005455 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 08:08:25.145450 tst iperf3.py: using LAC 39561 08:08:25.264350 tst iperf3.py: using RAC 36 08:08:25.386458 tst iperf3.py: using CellId 39561 08:08:25.506366 tst iperf3.py: using BVCI 39562 08:08:25.529878 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:08:25.540789 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:08:25.551491 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:08:25.562284 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:08:25.573140 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:08:25.584095 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:08:25.595080 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:08:25.605931 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:08:25.616864 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:08:25.896241 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 08:08:26.024065 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:08:26.341843 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26624): Launched 08:08:26.605200 run iperf3-srv_10.42.42.10(pid=26625): Launched 08:08:26.790328 tst iperf3.py:8: start network... 08:08:26.916650 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:08:27.404718 run create_hlr_db(pid=26626): Launched 08:08:27.580150 bus /gobi_6: Setting Powered False 08:08:28.600653 run create_hlr_db(pid=26626): Terminated: ok {rc=0} 08:08:29.036612 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26628): Launched 08:08:29.364784 run osmo-hlr_10.42.42.2(pid=26629): Launched 08:08:29.487713 run osmo-stp_10.42.42.5: Starting osmo-stp 08:08:30.057722 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26631): Launched 08:08:30.384483 run osmo-stp_10.42.42.5(pid=26632): Launched 08:08:30.502125 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:08:31.109351 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26634): Launched 08:08:31.221769 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:08:31.512255 run patchelf(pid=26635): Launched 08:08:31.696553 run osmo-stp_10.42.42.5(pid=26632): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26632)] 08:08:31.839946 run osmo-stp_10.42.42.5(pid=26632): stdout: | (launched: 2022-12-14_08:08:30.223367) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:08:31.980490 run osmo-stp_10.42.42.5(pid=26632): stderr: | �[0;m�[38;5;43m20221214080830412 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214080830412 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214080830412 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214080830412 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214080830413 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214080830413 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214080830413 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:08:32.109127 run osmo-stp_10.42.42.5(pid=26632): stdout: | (launched: 2022-12-14_08:08:30.223367) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:08:32.235941 run osmo-stp_10.42.42.5(pid=26632): stderr: | �[0;m�[38;5;43m20221214080830412 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214080830412 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214080830412 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214080830412 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214080830413 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214080830413 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214080830413 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:08:32.383141 run patchelf(pid=26635): Terminating (SIGINT) 08:08:32.555918 run patchelf(pid=26635): Terminated: ok {rc=0} 08:08:32.587767 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=26632): Process ended prematurely: osmo-stp_10.42.42.5(pid=26632) [trial-2401↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26632)] [trial-2401↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8] 08:08:32.597237 tst iperf3.py:8: Test FAILED (7.6 sec) 08:08:32.658060 run osmo-hlr_10.42.42.2(pid=26629): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26629)] 08:08:32.707332 run osmo-hlr_10.42.42.2(pid=26629): stdout: | (launched: 2022-12-14_08:08:29.203433) 08:08:32.756934 run osmo-hlr_10.42.42.2(pid=26629): stderr: | �[0;m�[1;31m20221214080829397 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214080829397 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214080829397 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214080829397 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214080829397 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214080829397 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214080829408 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:nanobts+band-900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214080829417 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214080829417 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214080829418 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:08:32.799280 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26624): Terminating (SIGTERM) 08:08:32.839352 run iperf3-srv_10.42.42.10(pid=26625): Terminating (SIGTERM) 08:08:32.879058 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26628): Terminating (SIGTERM) 08:08:32.918533 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26631): Terminating (SIGTERM) 08:08:32.958230 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26634): Terminating (SIGTERM) 08:08:32.967834 --- ParallelTerminationStrategy: PID 26624 died... 08:08:33.020918 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26624): Terminated: ok {rc=0} 08:08:33.030573 --- ParallelTerminationStrategy: PID 26625 died... 08:08:33.083569 run iperf3-srv_10.42.42.10(pid=26625): Terminated {rc=256} 08:08:33.093375 --- ParallelTerminationStrategy: PID 26628 died... 08:08:33.146482 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26628): Terminated: ok {rc=0} 08:08:33.156064 --- ParallelTerminationStrategy: PID 26631 died... 08:08:33.208899 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26631): Terminated: ok {rc=0} 08:08:33.219004 --- ParallelTerminationStrategy: PID 26634 died... 08:08:33.272099 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26634): Terminated: ok {rc=0} 08:08:33.356156 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26632): Process ended prematurely: osmo-stp_10.42.42.5(pid=26632) [trial-2401↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26632)]