Failed
gprs:nanobts+band-900+mod-bts0-egprs.ping.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=26660): Process ended prematurely: osmo-stp_10.42.42.5(pid=26660) [trial-2401↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26660)]
Standard Output
---------------------------------------------- trial-2401 gprs:nanobts+band-900+mod-bts0-egprs ping.py ---------------------------------------------- 08:08:54.585059 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:08:54.597671 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 08:08:54.743874 tst ping.py: using LAC 39563 08:08:54.864718 tst ping.py: using RAC 38 08:08:54.983244 tst ping.py: using CellId 39563 08:08:55.102690 tst ping.py: using BVCI 39564 08:08:55.125524 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:08:55.136508 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:08:55.147408 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:08:55.158231 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:08:55.169030 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:08:55.179727 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:08:55.190665 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:08:55.201510 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:08:55.493026 tst ping.py:19: start network... 08:08:55.627228 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:08:56.131836 run create_hlr_db(pid=26654): Launched 08:08:56.318019 bus /gobi_6: Setting Powered False 08:08:57.338981 run create_hlr_db(pid=26654): Terminated: ok {rc=0} 08:08:57.742233 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26656): Launched 08:08:58.039949 run osmo-hlr_10.42.42.2(pid=26657): Launched 08:08:58.158715 run osmo-stp_10.42.42.5: Starting osmo-stp 08:08:58.689674 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26659): Launched 08:08:58.988181 run osmo-stp_10.42.42.5(pid=26660): Launched 08:08:59.095660 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:08:59.617837 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26662): Launched 08:08:59.724128 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:08:59.986463 run patchelf(pid=26663): Launched 08:09:00.161947 run osmo-stp_10.42.42.5(pid=26660): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26660)] 08:09:00.290143 run osmo-stp_10.42.42.5(pid=26660): stdout: | (launched: 2022-12-14_08:08:58.840791) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:09:00.418813 run osmo-stp_10.42.42.5(pid=26660): stderr: | �[0;m�[38;5;43m20221214080859006 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214080859006 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214080859006 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214080859007 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214080859007 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214080859007 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214080859008 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:09:00.542301 run osmo-stp_10.42.42.5(pid=26660): stdout: | (launched: 2022-12-14_08:08:58.840791) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:09:00.664705 run osmo-stp_10.42.42.5(pid=26660): stderr: | �[0;m�[38;5;43m20221214080859006 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214080859006 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214080859006 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214080859007 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214080859007 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214080859007 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214080859008 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:09:00.807963 run patchelf(pid=26663): Terminating (SIGINT) 08:09:00.991761 run patchelf(pid=26663): Terminated: ok {rc=0} 08:09:01.023786 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=26660): Process ended prematurely: osmo-stp_10.42.42.5(pid=26660) [trial-2401↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26660)] [trial-2401↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22] 08:09:01.033540 tst ping.py:22: Test FAILED (6.4 sec) 08:09:01.095116 run osmo-hlr_10.42.42.2(pid=26657): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26657)] 08:09:01.145194 run osmo-hlr_10.42.42.2(pid=26657): stdout: | (launched: 2022-12-14_08:08:57.893381) 08:09:01.195718 run osmo-hlr_10.42.42.2(pid=26657): stderr: | �[0;m�[1;31m20221214080858066 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214080858066 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214080858066 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214080858066 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214080858066 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214080858066 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214080858079 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:nanobts+band-900+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214080858090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214080858090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214080858090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:09:01.239091 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26656): Terminating (SIGTERM) 08:09:01.280755 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26659): Terminating (SIGTERM) 08:09:01.321626 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26662): Terminating (SIGTERM) 08:09:01.332091 --- ParallelTerminationStrategy: PID 26656 died... 08:09:01.388388 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26656): Terminated: ok {rc=0} 08:09:01.398530 --- ParallelTerminationStrategy: PID 26659 died... 08:09:01.452653 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26659): Terminated: ok {rc=0} 08:09:01.462795 --- ParallelTerminationStrategy: PID 26662 died... 08:09:01.516787 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26662): Terminated: ok {rc=0} 08:09:01.612739 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26660): Process ended prematurely: osmo-stp_10.42.42.5(pid=26660) [trial-2401↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26660)]