Failed
gprs:oc2g+mod-bts0-egprs.ping.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=21364): Process ended prematurely: osmo-stp_10.42.42.5(pid=21364) [trial-2401↪gprs:oc2g+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21364)]
Standard Output
---------------------------------------------- trial-2401 gprs:oc2g+mod-bts0-egprs ping.py ---------------------------------------------- 07:12:38.577457 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:12:38.588906 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 07:12:38.720226 tst ping.py: using LAC 39266 07:12:38.847943 tst ping.py: using RAC 251 07:12:38.976369 tst ping.py: using CellId 39266 07:12:39.102506 tst ping.py: using BVCI 39267 07:12:39.127426 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:12:39.139005 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:12:39.150439 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:12:39.161639 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:12:39.173062 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:12:39.184405 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:12:39.196105 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:12:39.207750 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:12:39.497849 tst ping.py:19: start network... 07:12:39.633338 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:12:40.141050 run create_hlr_db(pid=21358): Launched 07:12:40.314562 bus /gobi_6: Setting Powered False 07:12:41.335552 run create_hlr_db(pid=21358): Terminated: ok {rc=0} 07:12:41.739006 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21360): Launched 07:12:42.038954 run osmo-hlr_10.42.42.2(pid=21361): Launched 07:12:42.152263 run osmo-stp_10.42.42.5: Starting osmo-stp 07:12:42.675864 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21363): Launched 07:12:42.978566 run osmo-stp_10.42.42.5(pid=21364): Launched 07:12:43.086723 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:12:43.612922 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21366): Launched 07:12:43.719598 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:12:43.983574 run patchelf(pid=21367): Launched 07:12:44.160535 run osmo-stp_10.42.42.5(pid=21364): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:oc2g+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21364)] 07:12:44.289838 run osmo-stp_10.42.42.5(pid=21364): stdout: | (launched: 2022-12-14_07:12:42.828932) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:12:44.419413 run osmo-stp_10.42.42.5(pid=21364): stderr: | �[0;m�[38;5;43m20221214071242999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214071242999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214071242999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214071243000 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214071243000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214071243000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214071243000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:12:44.543636 run osmo-stp_10.42.42.5(pid=21364): stdout: | (launched: 2022-12-14_07:12:42.828932) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:12:44.666718 run osmo-stp_10.42.42.5(pid=21364): stderr: | �[0;m�[38;5;43m20221214071242999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214071242999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214071242999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214071243000 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214071243000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214071243000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214071243000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:12:44.811533 run patchelf(pid=21367): Terminating (SIGINT) 07:12:44.982595 run patchelf(pid=21367): Terminated: ok {rc=0} 07:12:45.013520 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=21364): Process ended prematurely: osmo-stp_10.42.42.5(pid=21364) [trial-2401↪gprs:oc2g+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21364)] [trial-2401↪gprs:oc2g+mod-bts0-egprs↪ping.py:22] 07:12:45.022202 tst ping.py:22: Test FAILED (6.4 sec) 07:12:45.081646 run osmo-hlr_10.42.42.2(pid=21361): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:oc2g+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21361)] 07:12:45.130435 run osmo-hlr_10.42.42.2(pid=21361): stdout: | (launched: 2022-12-14_07:12:41.892029) 07:12:45.179907 run osmo-hlr_10.42.42.2(pid=21361): stderr: | �[0;m�[1;31m20221214071242063 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214071242063 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214071242063 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214071242063 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214071242063 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214071242063 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214071242075 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:oc2g+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214071242086 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214071242086 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214071242086 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:12:45.222155 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21360): Terminating (SIGTERM) 07:12:45.262052 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21363): Terminating (SIGTERM) 07:12:45.301994 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21366): Terminating (SIGTERM) 07:12:45.311176 --- ParallelTerminationStrategy: PID 21360 died... 07:12:45.364536 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21360): Terminated: ok {rc=0} 07:12:45.374159 --- ParallelTerminationStrategy: PID 21363 died... 07:12:45.427286 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21363): Terminated: ok {rc=0} 07:12:45.436755 --- ParallelTerminationStrategy: PID 21366 died... 07:12:45.489530 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21366): Terminated: ok {rc=0} 07:12:45.577648 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21364): Process ended prematurely: osmo-stp_10.42.42.5(pid=21364) [trial-2401↪gprs:oc2g+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21364)]