Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:sysmo.ping_idle_ping.py (from gprs_sysmo)

Failing for the past 71 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=20482): Process ended prematurely: osmo-stp_10.42.42.5(pid=20482) [trial-2401↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20482)]

Standard Output

----------------------------------------------
trial-2401 gprs:sysmo ping_idle_ping.py
----------------------------------------------
07:03:47.101107 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:03:47.116049 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
07:03:47.256135 tst                ping_idle_ping.py: using LAC 39220
07:03:47.391208 tst                ping_idle_ping.py: using RAC 205
07:03:47.520881 tst                ping_idle_ping.py: using CellId 39220
07:03:47.642612 tst                ping_idle_ping.py: using BVCI 39221
07:03:47.665914 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:03:47.676664 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:03:47.687409 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:03:47.698043 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:03:47.709054 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:03:47.720158 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:03:47.731264 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:03:47.742351 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
07:03:48.029551 tst             ping_idle_ping.py:24: start network...
07:03:48.156205 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
07:03:48.643001 run         create_hlr_db(pid=20476): Launched
07:03:48.818136 bus                          /gobi_6: Setting Powered False
07:03:49.838368 run         create_hlr_db(pid=20476): Terminated: ok {rc=0}
07:03:50.273421 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20478): Launched
07:03:50.601835 run   osmo-hlr_10.42.42.2(pid=20479): Launched
07:03:50.723692 run              osmo-stp_10.42.42.5: Starting osmo-stp
07:03:51.291995 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20481): Launched
07:03:51.619759 run   osmo-stp_10.42.42.5(pid=20482): Launched
07:03:51.738552 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
07:03:52.310977 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20484): Launched
07:03:52.429221 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
07:03:52.717672 run              patchelf(pid=20485): Launched
07:03:52.908247 run   osmo-stp_10.42.42.5(pid=20482): ERR: Terminated: ERROR {rc=1}  [trial-2401↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20482)]
07:03:53.048058 run   osmo-stp_10.42.42.5(pid=20482): stdout: 
| (launched: 2022-12-14_07:03:51.457192)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:03:53.188164 run   osmo-stp_10.42.42.5(pid=20482): stderr: 
| �[0;m�[38;5;43m20221214070351651 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214070351651 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214070351651 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214070351652 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214070351652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214070351652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214070351652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:03:53.323367 run   osmo-stp_10.42.42.5(pid=20482): stdout: 
| (launched: 2022-12-14_07:03:51.457192)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:03:53.456790 run   osmo-stp_10.42.42.5(pid=20482): stderr: 
| �[0;m�[38;5;43m20221214070351651 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214070351651 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214070351651 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214070351652 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214070351652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214070351652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214070351652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:03:53.614132 run              patchelf(pid=20485): Terminating (SIGINT)
07:03:53.798946 run              patchelf(pid=20485): Terminated: ok {rc=0}
07:03:53.832103 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=20482): Process ended prematurely: osmo-stp_10.42.42.5(pid=20482) [trial-2401↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20482)]  [trial-2401↪gprs:sysmo↪ping_idle_ping.py:27]
07:03:53.841526 tst             ping_idle_ping.py:27: Test FAILED (6.7 sec)
07:03:53.905014 run   osmo-hlr_10.42.42.2(pid=20479): ERR: Terminated: ERROR {rc=237}  [trial-2401↪gprs:sysmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20479)]
07:03:53.956665 run   osmo-hlr_10.42.42.2(pid=20479): stdout: 
| (launched: 2022-12-14_07:03:50.439120) 
07:03:54.009388 run   osmo-hlr_10.42.42.2(pid=20479): stderr: 
| �[0;m�[1;31m20221214070350640 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214070350640 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214070350640 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214070350640 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214070350640 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214070350640 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214070350651 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:sysmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214070350659 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214070350659 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214070350659 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
07:03:54.054271 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20478): Terminating (SIGTERM)
07:03:54.096511 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20481): Terminating (SIGTERM)
07:03:54.138828 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20484): Terminating (SIGTERM)
07:03:54.148569 ---      ParallelTerminationStrategy: PID 20478 died...
07:03:54.205216 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20478): Terminated: ok {rc=0}
07:03:54.215399 ---      ParallelTerminationStrategy: PID 20481 died...
07:03:54.272244 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20481): Terminated: ok {rc=0}
07:03:54.282493 ---      ParallelTerminationStrategy: PID 20484 died...
07:03:54.339044 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20484): Terminated: ok {rc=0}
07:03:54.426440 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20482): Process ended prematurely: osmo-stp_10.42.42.5(pid=20482) [trial-2401↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20482)]