Failed
gprs:trx-lms+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=24460): Process ended prematurely: osmo-stp_10.42.42.5(pid=24460) [trial-2401↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24460)]
Standard Output
---------------------------------------------- trial-2401 gprs:trx-lms+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 07:49:02.318054 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:49:02.330076 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 07:49:02.489998 tst iperf3.py: using LAC 39458 07:49:02.609272 tst iperf3.py: using RAC 188 07:49:02.729267 tst iperf3.py: using CellId 39458 07:49:02.849151 tst iperf3.py: using BVCI 39459 07:49:02.872564 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:49:02.883367 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:49:02.894128 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:49:02.904698 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:49:02.915254 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:49:02.925991 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:49:02.936676 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:49:02.947263 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:49:02.958037 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:49:03.256917 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 07:49:03.394226 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:49:03.737472 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24452): Launched 07:49:04.023503 run iperf3-srv_10.42.42.10(pid=24453): Launched 07:49:04.225351 tst iperf3.py:8: start network... 07:49:04.362539 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:49:04.883634 run create_hlr_db(pid=24454): Launched 07:49:05.074864 bus /gobi_6: Setting Powered False 07:49:06.095452 run create_hlr_db(pid=24454): Terminated: ok {rc=0} 07:49:06.509265 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24456): Launched 07:49:06.816910 run osmo-hlr_10.42.42.2(pid=24457): Launched 07:49:06.934132 run osmo-stp_10.42.42.5: Starting osmo-stp 07:49:07.469257 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24459): Launched 07:49:07.780249 run osmo-stp_10.42.42.5(pid=24460): Launched 07:49:07.891488 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:49:08.426234 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24462): Launched 07:49:08.535079 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:49:08.804613 run patchelf(pid=24463): Launched 07:49:08.983609 run osmo-stp_10.42.42.5(pid=24460): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24460)] 07:49:09.115690 run osmo-stp_10.42.42.5(pid=24460): stdout: | (launched: 2022-12-14_07:49:07.626409) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:49:09.246248 run osmo-stp_10.42.42.5(pid=24460): stderr: | �[0;m�[38;5;43m20221214074907798 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214074907798 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214074907799 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214074907799 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214074907800 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214074907800 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214074907800 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:49:09.371524 run osmo-stp_10.42.42.5(pid=24460): stdout: | (launched: 2022-12-14_07:49:07.626409) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:49:09.495820 run osmo-stp_10.42.42.5(pid=24460): stderr: | �[0;m�[38;5;43m20221214074907798 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214074907798 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214074907799 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214074907799 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214074907800 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214074907800 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214074907800 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:49:09.642091 run patchelf(pid=24463): Terminating (SIGINT) 07:49:09.815193 run patchelf(pid=24463): Terminated: ok {rc=0} 07:49:09.846762 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=24460): Process ended prematurely: osmo-stp_10.42.42.5(pid=24460) [trial-2401↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24460)] [trial-2401↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8] 07:49:09.855868 tst iperf3.py:8: Test FAILED (7.6 sec) 07:49:09.915111 run osmo-hlr_10.42.42.2(pid=24457): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24457)] 07:49:09.963622 run osmo-hlr_10.42.42.2(pid=24457): stdout: | (launched: 2022-12-14_07:49:06.665477) 07:49:10.012710 run osmo-hlr_10.42.42.2(pid=24457): stderr: | �[0;m�[1;31m20221214074906841 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214074906841 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214074906841 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214074906841 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214074906841 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214074906842 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214074906854 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:trx-lms+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214074906862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214074906862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214074906862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:49:10.054388 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24452): Terminating (SIGTERM) 07:49:10.093599 run iperf3-srv_10.42.42.10(pid=24453): Terminating (SIGTERM) 07:49:10.132728 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24456): Terminating (SIGTERM) 07:49:10.171891 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24459): Terminating (SIGTERM) 07:49:10.211101 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24462): Terminating (SIGTERM) 07:49:10.220391 --- ParallelTerminationStrategy: PID 24452 died... 07:49:10.273072 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24452): Terminated: ok {rc=0} 07:49:10.282618 --- ParallelTerminationStrategy: PID 24453 died... 07:49:10.335043 run iperf3-srv_10.42.42.10(pid=24453): Terminated {rc=256} 07:49:10.344482 --- ParallelTerminationStrategy: PID 24456 died... 07:49:10.397174 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24456): Terminated: ok {rc=0} 07:49:10.406680 --- ParallelTerminationStrategy: PID 24459 died... 07:49:10.458957 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24459): Terminated: ok {rc=0} 07:49:10.468556 --- ParallelTerminationStrategy: PID 24462 died... 07:49:10.520867 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24462): Terminated: ok {rc=0} 07:49:10.609565 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24460): Process ended prematurely: osmo-stp_10.42.42.5(pid=24460) [trial-2401↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24460)]