Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=22971): Process ended prematurely: osmo-stp_10.42.42.5(pid=22971) [trial-2401↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22971)]
Standard Output
---------------------------------------------- trial-2401 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 07:31:47.825987 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:31:47.838398 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 07:31:48.010658 tst iperf3.py: using LAC 39367 07:31:48.140776 tst iperf3.py: using RAC 97 07:31:48.269694 tst iperf3.py: using CellId 39367 07:31:48.399041 tst iperf3.py: using BVCI 39368 07:31:48.424352 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:31:48.436320 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:31:48.447836 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:31:48.459278 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:31:48.470970 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:31:48.482793 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:31:48.494672 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:31:48.506294 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:31:48.518251 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:31:48.800748 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 07:31:48.928776 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:31:49.249916 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22963): Launched 07:31:49.515501 run iperf3-srv_10.42.42.10(pid=22964): Launched 07:31:49.704656 tst iperf3.py:8: start network... 07:31:49.833248 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:31:50.328479 run create_hlr_db(pid=22965): Launched 07:31:50.520188 bus /gobi_6: Setting Powered False 07:31:51.540000 run create_hlr_db(pid=22965): Terminated: ok {rc=0} 07:31:51.979115 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22967): Launched 07:31:52.307923 run osmo-hlr_10.42.42.2(pid=22968): Launched 07:31:52.431628 run osmo-stp_10.42.42.5: Starting osmo-stp 07:31:53.003816 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22970): Launched 07:31:53.333696 run osmo-stp_10.42.42.5(pid=22971): Launched 07:31:53.453835 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:31:54.028400 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22973): Launched 07:31:54.146495 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:31:54.435662 run patchelf(pid=22974): Launched 07:31:54.628146 run osmo-stp_10.42.42.5(pid=22971): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22971)] 07:31:54.768701 run osmo-stp_10.42.42.5(pid=22971): stdout: | (launched: 2022-12-14_07:31:53.170943) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:31:54.909962 run osmo-stp_10.42.42.5(pid=22971): stderr: | �[0;m�[38;5;43m20221214073153360 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214073153360 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214073153360 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214073153361 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214073153361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214073153361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214073153361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:31:55.045861 run osmo-stp_10.42.42.5(pid=22971): stdout: | (launched: 2022-12-14_07:31:53.170943) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:31:55.180486 run osmo-stp_10.42.42.5(pid=22971): stderr: | �[0;m�[38;5;43m20221214073153360 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214073153360 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214073153360 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214073153361 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214073153361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214073153361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214073153361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:31:55.338452 run patchelf(pid=22974): Terminating (SIGINT) 07:31:55.524527 run patchelf(pid=22974): Terminated: ok {rc=0} 07:31:55.558632 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=22971): Process ended prematurely: osmo-stp_10.42.42.5(pid=22971) [trial-2401↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22971)] [trial-2401↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8] 07:31:55.568583 tst iperf3.py:8: Test FAILED (7.8 sec) 07:31:55.632138 run osmo-hlr_10.42.42.2(pid=22968): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22968)] 07:31:55.684001 run osmo-hlr_10.42.42.2(pid=22968): stdout: | (launched: 2022-12-14_07:31:52.146361) 07:31:55.736674 run osmo-hlr_10.42.42.2(pid=22968): stderr: | �[0;m�[1;31m20221214073152340 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214073152340 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214073152340 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214073152340 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214073152340 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214073152340 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214073152353 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214073152362 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214073152362 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214073152362 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:31:55.781438 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22963): Terminating (SIGTERM) 07:31:55.823966 run iperf3-srv_10.42.42.10(pid=22964): Terminating (SIGTERM) 07:31:55.866596 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22967): Terminating (SIGTERM) 07:31:55.908688 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22970): Terminating (SIGTERM) 07:31:55.950823 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22973): Terminating (SIGTERM) 07:31:55.960429 --- ParallelTerminationStrategy: PID 22963 died... 07:31:56.017293 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22963): Terminated: ok {rc=0} 07:31:56.027261 --- ParallelTerminationStrategy: PID 22964 died... 07:31:56.083216 run iperf3-srv_10.42.42.10(pid=22964): Terminated {rc=256} 07:31:56.093262 --- ParallelTerminationStrategy: PID 22967 died... 07:31:56.149126 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22967): Terminated: ok {rc=0} 07:31:56.159106 --- ParallelTerminationStrategy: PID 22970 died... 07:31:56.215152 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22970): Terminated: ok {rc=0} 07:31:56.225187 --- ParallelTerminationStrategy: PID 22973 died... 07:31:56.281288 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22973): Terminated: ok {rc=0} 07:31:56.368763 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22971): Process ended prematurely: osmo-stp_10.42.42.5(pid=22971) [trial-2401↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22971)]