Failed
gprs:trx-umtrx+mod-bts0-egprs.iperf3.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=23408): Process ended prematurely: osmo-stp_10.42.42.5(pid=23408) [trial-2401↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23408)]
Standard Output
---------------------------------------------- trial-2401 gprs:trx-umtrx+mod-bts0-egprs iperf3.py ---------------------------------------------- 07:38:04.878952 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:38:04.891415 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 07:38:05.043890 tst iperf3.py: using LAC 39401 07:38:05.174979 tst iperf3.py: using RAC 131 07:38:05.307473 tst iperf3.py: using CellId 39401 07:38:05.439146 tst iperf3.py: using BVCI 39402 07:38:05.464836 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:38:05.476384 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:38:05.487606 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:38:05.499008 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:38:05.510680 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:38:05.522961 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:38:05.535006 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:38:05.546697 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:38:05.558805 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:38:05.846609 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 07:38:05.975235 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:38:06.297080 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23400): Launched 07:38:06.567029 run iperf3-srv_10.42.42.10(pid=23401): Launched 07:38:06.756305 tst iperf3.py:8: start network... 07:38:06.885331 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:38:07.380434 run create_hlr_db(pid=23402): Launched 07:38:07.557250 bus /gobi_6: Setting Powered False 07:38:08.578979 run create_hlr_db(pid=23402): Terminated: ok {rc=0} 07:38:08.991353 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23404): Launched 07:38:09.300610 run osmo-hlr_10.42.42.2(pid=23405): Launched 07:38:09.414908 run osmo-stp_10.42.42.5: Starting osmo-stp 07:38:09.960678 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23407): Launched 07:38:10.271665 run osmo-stp_10.42.42.5(pid=23408): Launched 07:38:10.383359 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:38:10.920684 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23410): Launched 07:38:11.030122 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:38:11.300389 run patchelf(pid=23411): Launched 07:38:11.480538 run osmo-stp_10.42.42.5(pid=23408): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23408)] 07:38:11.612421 run osmo-stp_10.42.42.5(pid=23408): stdout: | (launched: 2022-12-14_07:38:10.117293) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:38:11.744479 run osmo-stp_10.42.42.5(pid=23408): stderr: | �[0;m�[38;5;43m20221214073810283 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214073810283 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214073810283 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214073810284 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214073810285 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214073810285 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214073810286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:38:11.871827 run osmo-stp_10.42.42.5(pid=23408): stdout: | (launched: 2022-12-14_07:38:10.117293) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:38:11.997991 run osmo-stp_10.42.42.5(pid=23408): stderr: | �[0;m�[38;5;43m20221214073810283 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214073810283 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214073810283 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214073810284 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214073810285 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214073810285 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214073810286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:38:12.145666 run patchelf(pid=23411): Terminating (SIGINT) 07:38:12.319953 run patchelf(pid=23411): Terminated: ok {rc=0} 07:38:12.351953 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=23408): Process ended prematurely: osmo-stp_10.42.42.5(pid=23408) [trial-2401↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23408)] [trial-2401↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8] 07:38:12.361164 tst iperf3.py:8: Test FAILED (7.5 sec) 07:38:12.420778 run osmo-hlr_10.42.42.2(pid=23405): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23405)] 07:38:12.469744 run osmo-hlr_10.42.42.2(pid=23405): stdout: | (launched: 2022-12-14_07:38:09.148341) 07:38:12.519434 run osmo-hlr_10.42.42.2(pid=23405): stderr: | �[0;m�[1;31m20221214073809322 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214073809322 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214073809322 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214073809322 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214073809322 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214073809322 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214073809334 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:trx-umtrx+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214073809342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214073809342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214073809342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:38:12.561884 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23400): Terminating (SIGTERM) 07:38:12.601707 run iperf3-srv_10.42.42.10(pid=23401): Terminating (SIGTERM) 07:38:12.641655 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23404): Terminating (SIGTERM) 07:38:12.681582 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23407): Terminating (SIGTERM) 07:38:12.721439 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23410): Terminating (SIGTERM) 07:38:12.730743 --- ParallelTerminationStrategy: PID 23400 died... 07:38:12.784070 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23400): Terminated: ok {rc=0} 07:38:12.793838 --- ParallelTerminationStrategy: PID 23401 died... 07:38:12.846889 run iperf3-srv_10.42.42.10(pid=23401): Terminated {rc=256} 07:38:12.856469 --- ParallelTerminationStrategy: PID 23404 died... 07:38:12.909373 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23404): Terminated: ok {rc=0} 07:38:12.918983 --- ParallelTerminationStrategy: PID 23407 died... 07:38:12.971816 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23407): Terminated: ok {rc=0} 07:38:12.981562 --- ParallelTerminationStrategy: PID 23410 died... 07:38:13.034567 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23410): Terminated: ok {rc=0} 07:38:13.122569 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23408): Process ended prematurely: osmo-stp_10.42.42.5(pid=23408) [trial-2401↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23408)]