Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.ping.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=23917): Process ended prematurely: osmo-stp_10.42.42.5(pid=23917) [trial-2401↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23917)]
Standard Output
---------------------------------------------- trial-2401 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend ping.py ---------------------------------------------- 07:41:37.676807 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:41:37.689136 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 07:41:37.829167 tst ping.py: using LAC 39418 07:41:37.948797 tst ping.py: using RAC 148 07:41:38.078534 tst ping.py: using CellId 39418 07:41:38.203188 tst ping.py: using BVCI 39419 07:41:38.228059 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:41:38.240086 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:41:38.252427 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:41:38.264176 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:41:38.276298 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:41:38.288442 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:41:38.300660 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:41:38.312754 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 07:41:38.591891 tst ping.py:19: start network... 07:41:38.716564 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:41:39.199689 run create_hlr_db(pid=23911): Launched 07:41:39.372160 bus /gobi_6: Setting Powered False 07:41:40.393142 run create_hlr_db(pid=23911): Terminated: ok {rc=0} 07:41:40.796420 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23913): Launched 07:41:41.098488 run osmo-hlr_10.42.42.2(pid=23914): Launched 07:41:41.208194 run osmo-stp_10.42.42.5: Starting osmo-stp 07:41:41.737375 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23916): Launched 07:41:42.040715 run osmo-stp_10.42.42.5(pid=23917): Launched 07:41:42.149152 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:41:42.674787 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23919): Launched 07:41:42.781568 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:41:43.047026 run patchelf(pid=23920): Launched 07:41:43.223909 run osmo-stp_10.42.42.5(pid=23917): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23917)] 07:41:43.352791 run osmo-stp_10.42.42.5(pid=23917): stdout: | (launched: 2022-12-14_07:41:41.889802) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:41:43.482039 run osmo-stp_10.42.42.5(pid=23917): stderr: | �[0;m�[38;5;43m20221214074142061 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214074142061 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214074142062 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214074142062 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214074142063 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214074142063 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214074142063 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:41:43.607366 run osmo-stp_10.42.42.5(pid=23917): stdout: | (launched: 2022-12-14_07:41:41.889802) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:41:43.730195 run osmo-stp_10.42.42.5(pid=23917): stderr: | �[0;m�[38;5;43m20221214074142061 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214074142061 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214074142062 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214074142062 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214074142063 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214074142063 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214074142063 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:41:43.874790 run patchelf(pid=23920): Terminating (SIGINT) 07:41:44.045554 run patchelf(pid=23920): Terminated: ok {rc=0} 07:41:44.076568 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=23917): Process ended prematurely: osmo-stp_10.42.42.5(pid=23917) [trial-2401↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23917)] [trial-2401↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22] 07:41:44.085392 tst ping.py:22: Test FAILED (6.4 sec) 07:41:44.144983 run osmo-hlr_10.42.42.2(pid=23914): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23914)] 07:41:44.193519 run osmo-hlr_10.42.42.2(pid=23914): stdout: | (launched: 2022-12-14_07:41:40.948926) 07:41:44.242833 run osmo-hlr_10.42.42.2(pid=23914): stderr: | �[0;m�[1;31m20221214074141125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214074141125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214074141125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214074141125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214074141125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214074141125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214074141137 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214074141146 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214074141147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214074141147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:41:44.284779 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23913): Terminating (SIGTERM) 07:41:44.324465 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23916): Terminating (SIGTERM) 07:41:44.364011 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23919): Terminating (SIGTERM) 07:41:44.373169 --- ParallelTerminationStrategy: PID 23913 died... 07:41:44.425931 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23913): Terminated: ok {rc=0} 07:41:44.435366 --- ParallelTerminationStrategy: PID 23916 died... 07:41:44.488185 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23916): Terminated: ok {rc=0} 07:41:44.497738 --- ParallelTerminationStrategy: PID 23919 died... 07:41:44.550311 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23919): Terminated: ok {rc=0} 07:41:44.634059 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23917): Process ended prematurely: osmo-stp_10.42.42.5(pid=23917) [trial-2401↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23917)]