Failed
gprs:sysmo+mod-bts0-dynts-osmo.ping.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=20683): Process ended prematurely: osmo-stp_10.42.42.5(pid=20683) [trial-2401↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20683)]
Standard Output
---------------------------------------------- trial-2401 gprs:sysmo+mod-bts0-dynts-osmo ping.py ---------------------------------------------- 07:06:40.385124 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:06:40.396845 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 07:06:40.550628 tst ping.py: using LAC 39234 07:06:40.678887 tst ping.py: using RAC 219 07:06:40.809675 tst ping.py: using CellId 39234 07:06:40.939591 tst ping.py: using BVCI 39235 07:06:40.964893 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:06:40.976594 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:06:40.987840 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:06:40.999284 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:06:41.010816 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:06:41.022331 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:06:41.034086 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:06:41.045647 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:06:41.324941 tst ping.py:19: start network... 07:06:41.450968 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:06:41.938719 run create_hlr_db(pid=20677): Launched 07:06:42.113760 bus /gobi_6: Setting Powered False 07:06:43.133704 run create_hlr_db(pid=20677): Terminated: ok {rc=0} 07:06:43.571804 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20679): Launched 07:06:43.900330 run osmo-hlr_10.42.42.2(pid=20680): Launched 07:06:44.021831 run osmo-stp_10.42.42.5: Starting osmo-stp 07:06:44.597093 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20682): Launched 07:06:44.925885 run osmo-stp_10.42.42.5(pid=20683): Launched 07:06:45.045454 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:06:45.616046 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20685): Launched 07:06:45.732836 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:06:46.054754 run patchelf(pid=20686): Launched 07:06:46.240262 run osmo-stp_10.42.42.5(pid=20683): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20683)] 07:06:46.374741 run osmo-stp_10.42.42.5(pid=20683): stdout: | (launched: 2022-12-14_07:06:44.763343) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:06:46.507848 run osmo-stp_10.42.42.5(pid=20683): stderr: | �[0;m�[38;5;43m20221214070644958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214070644958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214070644958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214070644958 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214070644959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214070644959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214070644959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:06:46.638043 run osmo-stp_10.42.42.5(pid=20683): stdout: | (launched: 2022-12-14_07:06:44.763343) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:06:46.765465 run osmo-stp_10.42.42.5(pid=20683): stderr: | �[0;m�[38;5;43m20221214070644958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214070644958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214070644958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214070644958 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214070644959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214070644959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214070644959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:06:46.915710 run patchelf(pid=20686): Terminating (SIGINT) 07:06:47.091450 run patchelf(pid=20686): Terminated: ok {rc=0} 07:06:47.124290 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=20683): Process ended prematurely: osmo-stp_10.42.42.5(pid=20683) [trial-2401↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20683)] [trial-2401↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22] 07:06:47.133510 tst ping.py:22: Test FAILED (6.7 sec) 07:06:47.195983 run osmo-hlr_10.42.42.2(pid=20680): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20680)] 07:06:47.245744 run osmo-hlr_10.42.42.2(pid=20680): stdout: | (launched: 2022-12-14_07:06:43.738221) 07:06:47.295808 run osmo-hlr_10.42.42.2(pid=20680): stderr: | �[0;m�[1;31m20221214070643942 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214070643942 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214070643942 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214070643942 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214070643942 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214070643942 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214070643954 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:sysmo+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214070643962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214070643962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214070643962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:06:47.338516 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20679): Terminating (SIGTERM) 07:06:47.379038 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20682): Terminating (SIGTERM) 07:06:47.419212 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20685): Terminating (SIGTERM) 07:06:47.428550 --- ParallelTerminationStrategy: PID 20679 died... 07:06:47.482273 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20679): Terminated: ok {rc=0} 07:06:47.491998 --- ParallelTerminationStrategy: PID 20682 died... 07:06:47.545338 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20682): Terminated: ok {rc=0} 07:06:47.555016 --- ParallelTerminationStrategy: PID 20685 died... 07:06:47.608348 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20685): Terminated: ok {rc=0} 07:06:47.692198 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20683): Process ended prematurely: osmo-stp_10.42.42.5(pid=20683) [trial-2401↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20683)]