Failed
gprs:trx-lms-limenet-micro+mod-bts0-egprs.ping.py (from gprs_trx-lms-limenet-micro+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=25706): Process ended prematurely: osmo-stp_10.42.42.5(pid=25706) [trial-2401↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25706)]
Standard Output
---------------------------------------------- trial-2401 gprs:trx-lms-limenet-micro+mod-bts0-egprs ping.py ---------------------------------------------- 07:55:31.530868 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:55:31.543793 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x bts (candidates: 1) 07:55:31.684750 tst ping.py: using LAC 39492 07:55:31.806087 tst ping.py: using RAC 222 07:55:31.959150 tst ping.py: using CellId 39492 07:55:32.118199 tst ping.py: using BVCI 39493 07:55:32.150183 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:55:32.167020 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:55:32.183880 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:55:32.198817 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:55:32.222070 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:55:32.249464 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:55:32.262497 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:55:32.274487 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:55:32.559112 tst ping.py:19: start network... 07:55:32.683465 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:55:33.164021 run create_hlr_db(pid=25700): Launched 07:55:33.336092 bus /gobi_6: Setting Powered False 07:55:34.358358 run create_hlr_db(pid=25700): Terminated: ok {rc=0} 07:55:34.790689 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25702): Launched 07:55:35.115528 run osmo-hlr_10.42.42.2(pid=25703): Launched 07:55:35.233977 run osmo-stp_10.42.42.5: Starting osmo-stp 07:55:35.798957 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25705): Launched 07:55:36.123237 run osmo-stp_10.42.42.5(pid=25706): Launched 07:55:36.240558 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:55:36.804630 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25708): Launched 07:55:36.919654 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:55:37.204144 run patchelf(pid=25709): Launched 07:55:37.392826 run osmo-stp_10.42.42.5(pid=25706): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25706)] 07:55:37.530838 run osmo-stp_10.42.42.5(pid=25706): stdout: | (launched: 2022-12-14_07:55:35.962213) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:55:37.669005 run osmo-stp_10.42.42.5(pid=25706): stderr: | �[0;m�[38;5;43m20221214075536157 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214075536157 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214075536157 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214075536158 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214075536158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214075536158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214075536158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:55:37.801845 run osmo-stp_10.42.42.5(pid=25706): stdout: | (launched: 2022-12-14_07:55:35.962213) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:55:37.934620 run osmo-stp_10.42.42.5(pid=25706): stderr: | �[0;m�[38;5;43m20221214075536157 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214075536157 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214075536157 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214075536158 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214075536158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214075536158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214075536158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:55:38.079444 run patchelf(pid=25709): Terminating (SIGINT) 07:55:38.251503 run patchelf(pid=25709): Terminated: ok {rc=0} 07:55:38.282656 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=25706): Process ended prematurely: osmo-stp_10.42.42.5(pid=25706) [trial-2401↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25706)] [trial-2401↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py:22] 07:55:38.291755 tst ping.py:22: Test FAILED (6.8 sec) 07:55:38.351855 run osmo-hlr_10.42.42.2(pid=25703): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25703)] 07:55:38.400793 run osmo-hlr_10.42.42.2(pid=25703): stdout: | (launched: 2022-12-14_07:55:34.953983) 07:55:38.450557 run osmo-hlr_10.42.42.2(pid=25703): stderr: | �[0;m�[1;31m20221214075535152 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214075535152 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214075535152 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214075535152 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214075535152 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214075535152 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214075535164 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:trx-lms-limenet-micro+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214075535173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214075535173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214075535173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:55:38.492801 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25702): Terminating (SIGTERM) 07:55:38.532438 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25705): Terminating (SIGTERM) 07:55:38.572135 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25708): Terminating (SIGTERM) 07:55:38.581491 --- ParallelTerminationStrategy: PID 25702 died... 07:55:38.635040 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25702): Terminated: ok {rc=0} 07:55:38.644675 --- ParallelTerminationStrategy: PID 25705 died... 07:55:38.697783 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25705): Terminated: ok {rc=0} 07:55:38.707447 --- ParallelTerminationStrategy: PID 25708 died... 07:55:38.760205 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25708): Terminated: ok {rc=0} 07:55:38.847106 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25706): Process ended prematurely: osmo-stp_10.42.42.5(pid=25706) [trial-2401↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25706)]