Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:nanobts+band-1900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)

Failing for the past 264 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=1415): Process ended prematurely: osmo-stp_10.42.42.5(pid=1415) [trial-2402↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1415)]

Standard Output

----------------------------------------------
trial-2402 gprs:nanobts+band-1900+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
09:30:54.375289 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
09:30:54.387021 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
09:30:54.536658 tst                        iperf3.py: using LAC 39994
09:30:54.656233 tst                        iperf3.py: using RAC 214
09:30:54.779469 tst                        iperf3.py: using CellId 39994
09:30:54.902702 tst                        iperf3.py: using BVCI 39995
09:30:54.927325 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
09:30:54.938857 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
09:30:54.950130 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
09:30:54.961470 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
09:30:54.972679 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
09:30:54.984739 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
09:30:54.996196 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
09:30:55.007418 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
09:30:55.018952 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
09:30:55.308605 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
09:30:55.442025 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
09:30:55.772911 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1407): Launched
09:30:56.048770 run iperf3-srv_10.42.42.10(pid=1408): Launched
09:30:56.244484 tst                      iperf3.py:8: start network...
09:30:56.378443 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
09:30:56.889632 run          create_hlr_db(pid=1409): Launched
09:30:57.073826 bus                          /gobi_6: Setting Powered False
09:30:58.095653 run          create_hlr_db(pid=1409): Terminated: ok {rc=0}
09:30:58.497135 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1411): Launched
09:30:58.797975 run    osmo-hlr_10.42.42.2(pid=1412): Launched
09:30:58.917840 run              osmo-stp_10.42.42.5: Starting osmo-stp
09:30:59.447538 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1414): Launched
09:30:59.747327 run    osmo-stp_10.42.42.5(pid=1415): Launched
09:30:59.856055 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
09:31:00.378358 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1417): Launched
09:31:00.485306 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
09:31:00.746900 run               patchelf(pid=1418): Launched
09:31:00.932689 run    osmo-stp_10.42.42.5(pid=1415): ERR: Terminated: ERROR {rc=1}  [trial-2402↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1415)]
09:31:01.064914 run    osmo-stp_10.42.42.5(pid=1415): stdout: 
| (launched: 2022-12-14_09:30:59.599428)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
09:31:01.197208 run    osmo-stp_10.42.42.5(pid=1415): stderr: 
| �[0;m�[38;5;43m20221214093059766 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214093059766 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214093059766 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214093059767 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214093059767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214093059767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214093059767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
09:31:01.325079 run    osmo-stp_10.42.42.5(pid=1415): stdout: 
| (launched: 2022-12-14_09:30:59.599428)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
09:31:01.452046 run    osmo-stp_10.42.42.5(pid=1415): stderr: 
| �[0;m�[38;5;43m20221214093059766 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214093059766 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214093059766 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214093059767 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214093059767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214093059767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214093059767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
09:31:01.598468 run               patchelf(pid=1418): Terminating (SIGINT)
09:31:01.770982 run               patchelf(pid=1418): Terminated: ok {rc=0}
09:31:01.803768 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=1415): Process ended prematurely: osmo-stp_10.42.42.5(pid=1415) [trial-2402↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1415)]  [trial-2402↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8]
09:31:01.814123 tst                      iperf3.py:8: Test FAILED (7.5 sec)
09:31:01.877467 run    osmo-hlr_10.42.42.2(pid=1412): ERR: Terminated: ERROR {rc=237}  [trial-2402↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1412)]
09:31:01.928694 run    osmo-hlr_10.42.42.2(pid=1412): stdout: 
| (launched: 2022-12-14_09:30:58.648814) 
09:31:01.980606 run    osmo-hlr_10.42.42.2(pid=1412): stderr: 
| �[0;m�[1;31m20221214093058822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214093058822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214093058822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214093058822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214093058822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214093058822 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214093058838 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214093058846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214093058847 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214093058847 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
09:31:02.025058 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1407): Terminating (SIGTERM)
09:31:02.067536 run iperf3-srv_10.42.42.10(pid=1408): Terminating (SIGTERM)
09:31:02.112715 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1411): Terminating (SIGTERM)
09:31:02.153925 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1414): Terminating (SIGTERM)
09:31:02.195197 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1417): Terminating (SIGTERM)
09:31:02.204907 ---      ParallelTerminationStrategy: PID 1407 died...
09:31:02.264095 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1407): Terminated: ok {rc=0}
09:31:02.274172 ---      ParallelTerminationStrategy: PID 1408 died...
09:31:02.329313 run iperf3-srv_10.42.42.10(pid=1408): Terminated {rc=256}
09:31:02.339280 ---      ParallelTerminationStrategy: PID 1411 died...
09:31:02.394565 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1411): Terminated: ok {rc=0}
09:31:02.404552 ---      ParallelTerminationStrategy: PID 1414 died...
09:31:02.459663 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1414): Terminated: ok {rc=0}
09:31:02.469664 ---      ParallelTerminationStrategy: PID 1417 died...
09:31:02.524564 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1417): Terminated: ok {rc=0}
09:31:02.610149 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1415): Process ended prematurely: osmo-stp_10.42.42.5(pid=1415) [trial-2402↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1415)]