Failed
gprs:nanobts+band-1900+mod-bts0-egprs.ping.py (from gprs_nanobts+band-1900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=1374): Process ended prematurely: osmo-stp_10.42.42.5(pid=1374) [trial-2402↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1374)]
Standard Output
---------------------------------------------- trial-2402 gprs:nanobts+band-1900+mod-bts0-egprs ping.py ---------------------------------------------- 09:30:24.013450 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:30:24.025565 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 09:30:24.158516 tst ping.py: using LAC 39991 09:30:24.283390 tst ping.py: using RAC 211 09:30:24.406327 tst ping.py: using CellId 39991 09:30:24.525946 tst ping.py: using BVCI 39992 09:30:24.548448 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:30:24.559734 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:30:24.570694 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:30:24.581690 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:30:24.593441 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:30:24.604466 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:30:24.615840 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:30:24.627114 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:30:24.912564 tst ping.py:19: start network... 09:30:25.044366 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:30:25.547888 run create_hlr_db(pid=1368): Launched 09:30:25.729494 bus /gobi_6: Setting Powered False 09:30:26.750065 run create_hlr_db(pid=1368): Terminated: ok {rc=0} 09:30:27.142510 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1370): Launched 09:30:27.436638 run osmo-hlr_10.42.42.2(pid=1371): Launched 09:30:27.548618 run osmo-stp_10.42.42.5: Starting osmo-stp 09:30:28.062543 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1373): Launched 09:30:28.356241 run osmo-stp_10.42.42.5(pid=1374): Launched 09:30:28.462560 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:30:28.976032 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1376): Launched 09:30:29.080443 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:30:29.338029 run patchelf(pid=1377): Launched 09:30:29.511102 run osmo-stp_10.42.42.5(pid=1374): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1374)] 09:30:29.637466 run osmo-stp_10.42.42.5(pid=1374): stdout: | (launched: 2022-12-14_09:30:28.210987) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:30:29.764302 run osmo-stp_10.42.42.5(pid=1374): stderr: | �[0;m�[38;5;43m20221214093028378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214093028378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214093028379 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214093028379 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214093028380 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214093028380 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214093028380 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:30:29.887156 run osmo-stp_10.42.42.5(pid=1374): stdout: | (launched: 2022-12-14_09:30:28.210987) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:30:30.008700 run osmo-stp_10.42.42.5(pid=1374): stderr: | �[0;m�[38;5;43m20221214093028378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214093028378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214093028379 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214093028379 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214093028380 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214093028380 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214093028380 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:30:30.149703 run patchelf(pid=1377): Terminating (SIGINT) 09:30:30.314837 run patchelf(pid=1377): Terminated: ok {rc=0} 09:30:30.344863 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=1374): Process ended prematurely: osmo-stp_10.42.42.5(pid=1374) [trial-2402↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1374)] [trial-2402↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py:22] 09:30:30.353534 tst ping.py:22: Test FAILED (6.3 sec) 09:30:30.413774 run osmo-hlr_10.42.42.2(pid=1371): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1371)] 09:30:30.462874 run osmo-hlr_10.42.42.2(pid=1371): stdout: | (launched: 2022-12-14_09:30:27.291350) 09:30:30.512651 run osmo-hlr_10.42.42.2(pid=1371): stderr: | �[0;m�[1;31m20221214093027464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214093027464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214093027464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214093027464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214093027464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214093027464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214093027475 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:nanobts+band-1900+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214093027485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214093027485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214093027485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:30:30.554925 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1370): Terminating (SIGTERM) 09:30:30.594694 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1373): Terminating (SIGTERM) 09:30:30.634415 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1376): Terminating (SIGTERM) 09:30:30.643639 --- ParallelTerminationStrategy: PID 1370 died... 09:30:30.697530 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1370): Terminated: ok {rc=0} 09:30:30.707209 --- ParallelTerminationStrategy: PID 1373 died... 09:30:30.760235 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1373): Terminated: ok {rc=0} 09:30:30.769938 --- ParallelTerminationStrategy: PID 1376 died... 09:30:30.823060 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1376): Terminated: ok {rc=0} 09:30:30.919836 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1374): Process ended prematurely: osmo-stp_10.42.42.5(pid=1374) [trial-2402↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1374)]