Failed
gprs:nanobts+band-900+mod-bts0-egprs.iperf3.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=1780): Process ended prematurely: osmo-stp_10.42.42.5(pid=1780) [trial-2402↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1780)]
Standard Output
---------------------------------------------- trial-2402 gprs:nanobts+band-900+mod-bts0-egprs iperf3.py ---------------------------------------------- 09:36:02.698628 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:36:02.710674 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 09:36:02.860156 tst iperf3.py: using LAC 40022 09:36:02.985089 tst iperf3.py: using RAC 242 09:36:03.109912 tst iperf3.py: using CellId 40022 09:36:03.234569 tst iperf3.py: using BVCI 40023 09:36:03.259237 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:36:03.270775 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:36:03.282069 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:36:03.293348 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:36:03.304513 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:36:03.315839 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:36:03.327377 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:36:03.338752 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:36:03.350224 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:36:03.627899 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 09:36:03.753944 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:36:04.067786 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1771): Launched 09:36:04.328435 run iperf3-srv_10.42.42.10(pid=1772): Launched 09:36:04.512475 tst iperf3.py:8: start network... 09:36:04.638622 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:36:05.115517 run create_hlr_db(pid=1773): Launched 09:36:05.288108 bus /gobi_6: Setting Powered False 09:36:06.310144 run create_hlr_db(pid=1773): Terminated: ok {rc=0} 09:36:06.737887 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1775): Launched 09:36:07.062523 run osmo-hlr_10.42.42.2(pid=1776): Launched 09:36:07.184061 run osmo-stp_10.42.42.5: Starting osmo-stp 09:36:07.746912 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1778): Launched 09:36:08.070149 run osmo-stp_10.42.42.5(pid=1780): Launched 09:36:08.187173 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:36:08.749440 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1782): Launched 09:36:08.864724 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:36:09.146483 run patchelf(pid=1783): Launched 09:36:09.335134 run osmo-stp_10.42.42.5(pid=1780): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1780)] 09:36:09.473002 run osmo-stp_10.42.42.5(pid=1780): stdout: | (launched: 2022-12-14_09:36:07.910557) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:36:09.610907 run osmo-stp_10.42.42.5(pid=1780): stderr: | �[0;m�[38;5;43m20221214093608099 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214093608099 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214093608099 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214093608100 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214093608100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214093608100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214093608100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:36:09.744279 run osmo-stp_10.42.42.5(pid=1780): stdout: | (launched: 2022-12-14_09:36:07.910557) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:36:09.876337 run osmo-stp_10.42.42.5(pid=1780): stderr: | �[0;m�[38;5;43m20221214093608099 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214093608099 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214093608099 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214093608100 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214093608100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214093608100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214093608100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:36:10.029940 run patchelf(pid=1783): Terminating (SIGINT) 09:36:10.211051 run patchelf(pid=1783): Terminated: ok {rc=0} 09:36:10.244073 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=1780): Process ended prematurely: osmo-stp_10.42.42.5(pid=1780) [trial-2402↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1780)] [trial-2402↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8] 09:36:10.253910 tst iperf3.py:8: Test FAILED (7.6 sec) 09:36:10.317721 run osmo-hlr_10.42.42.2(pid=1776): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1776)] 09:36:10.369371 run osmo-hlr_10.42.42.2(pid=1776): stdout: | (launched: 2022-12-14_09:36:06.902053) 09:36:10.421466 run osmo-hlr_10.42.42.2(pid=1776): stderr: | �[0;m�[1;31m20221214093607097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214093607097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214093607097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214093607097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214093607097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214093607097 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214093607109 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:nanobts+band-900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214093607119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214093607119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214093607119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:36:10.465760 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1771): Terminating (SIGTERM) 09:36:10.507489 run iperf3-srv_10.42.42.10(pid=1772): Terminating (SIGTERM) 09:36:10.549301 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1775): Terminating (SIGTERM) 09:36:10.591109 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1778): Terminating (SIGTERM) 09:36:10.632889 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1782): Terminating (SIGTERM) 09:36:10.642710 --- ParallelTerminationStrategy: PID 1771 died... 09:36:10.698591 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1771): Terminated: ok {rc=0} 09:36:10.708687 --- ParallelTerminationStrategy: PID 1772 died... 09:36:10.764043 run iperf3-srv_10.42.42.10(pid=1772): Terminated {rc=256} 09:36:10.774075 --- ParallelTerminationStrategy: PID 1775 died... 09:36:10.829557 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1775): Terminated: ok {rc=0} 09:36:10.839555 --- ParallelTerminationStrategy: PID 1778 died... 09:36:10.895240 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1778): Terminated: ok {rc=0} 09:36:10.905348 --- ParallelTerminationStrategy: PID 1782 died... 09:36:10.960502 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1782): Terminated: ok {rc=0} 09:36:11.047165 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1780): Process ended prematurely: osmo-stp_10.42.42.5(pid=1780) [trial-2402↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1780)]