Failed
gprs:nanobts+band-900+mod-bts0-egprs.ping.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=1808): Process ended prematurely: osmo-stp_10.42.42.5(pid=1808) [trial-2402↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1808)]
Standard Output
---------------------------------------------- trial-2402 gprs:nanobts+band-900+mod-bts0-egprs ping.py ---------------------------------------------- 09:36:32.272906 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:36:32.284407 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 09:36:32.427703 tst ping.py: using LAC 40024 09:36:32.550817 tst ping.py: using RAC 244 09:36:32.667007 tst ping.py: using CellId 40024 09:36:32.791068 tst ping.py: using BVCI 40025 09:36:32.815852 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:36:32.827716 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:36:32.839267 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:36:32.850804 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:36:32.862706 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:36:32.874660 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:36:32.886783 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:36:32.898753 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:36:33.187870 tst ping.py:19: start network... 09:36:33.319473 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:36:33.826329 run create_hlr_db(pid=1802): Launched 09:36:34.009255 bus /gobi_6: Setting Powered False 09:36:35.029302 run create_hlr_db(pid=1802): Terminated: ok {rc=0} 09:36:35.425264 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1804): Launched 09:36:35.721239 run osmo-hlr_10.42.42.2(pid=1805): Launched 09:36:35.829584 run osmo-stp_10.42.42.5: Starting osmo-stp 09:36:36.346103 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1807): Launched 09:36:36.641681 run osmo-stp_10.42.42.5(pid=1808): Launched 09:36:36.748614 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:36:37.265879 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1810): Launched 09:36:37.371252 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:36:37.631133 run patchelf(pid=1811): Launched 09:36:37.805091 run osmo-stp_10.42.42.5(pid=1808): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1808)] 09:36:37.932132 run osmo-stp_10.42.42.5(pid=1808): stdout: | (launched: 2022-12-14_09:36:36.495124) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:36:38.059558 run osmo-stp_10.42.42.5(pid=1808): stderr: | �[0;m�[38;5;43m20221214093636662 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214093636662 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214093636662 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214093636663 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214093636663 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214093636663 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214093636663 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:36:38.183329 run osmo-stp_10.42.42.5(pid=1808): stdout: | (launched: 2022-12-14_09:36:36.495124) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:36:38.306351 run osmo-stp_10.42.42.5(pid=1808): stderr: | �[0;m�[38;5;43m20221214093636662 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214093636662 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214093636662 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214093636663 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214093636663 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214093636663 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214093636663 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:36:38.447553 run patchelf(pid=1811): Terminating (SIGINT) 09:36:38.613449 run patchelf(pid=1811): Terminated: ok {rc=0} 09:36:38.643512 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=1808): Process ended prematurely: osmo-stp_10.42.42.5(pid=1808) [trial-2402↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1808)] [trial-2402↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22] 09:36:38.652164 tst ping.py:22: Test FAILED (6.4 sec) 09:36:38.712146 run osmo-hlr_10.42.42.2(pid=1805): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1805)] 09:36:38.761000 run osmo-hlr_10.42.42.2(pid=1805): stdout: | (launched: 2022-12-14_09:36:35.574830) 09:36:38.810396 run osmo-hlr_10.42.42.2(pid=1805): stderr: | �[0;m�[1;31m20221214093635745 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214093635745 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214093635745 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214093635745 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214093635746 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214093635746 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214093635758 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:nanobts+band-900+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214093635767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214093635767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214093635767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:36:38.852378 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1804): Terminating (SIGTERM) 09:36:38.891907 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1807): Terminating (SIGTERM) 09:36:38.931407 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1810): Terminating (SIGTERM) 09:36:38.940694 --- ParallelTerminationStrategy: PID 1804 died... 09:36:38.994410 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1804): Terminated: ok {rc=0} 09:36:39.003968 --- ParallelTerminationStrategy: PID 1807 died... 09:36:39.057191 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1807): Terminated: ok {rc=0} 09:36:39.066724 --- ParallelTerminationStrategy: PID 1810 died... 09:36:39.119819 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1810): Terminated: ok {rc=0} 09:36:39.203362 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1808): Process ended prematurely: osmo-stp_10.42.42.5(pid=1808) [trial-2402↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1808)]