ping_idle_ping.py gprs:sysmo

Failed

Failing for the past 72 builds since #2331

Took 7 sec (from gprs_sysmo)

Stack Trace

osmo-stp_10.42.42.5(pid=28555): Process ended prematurely: osmo-stp_10.42.42.5(pid=28555) [trial-2402↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28555)]

Standard Output


----------------------------------------------
trial-2402 gprs:sysmo ping_idle_ping.py
----------------------------------------------
08:32:03.007960 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
08:32:03.019965 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
08:32:03.152690 tst                ping_idle_ping.py: using LAC 39681
08:32:03.281531 tst                ping_idle_ping.py: using RAC 156
08:32:03.410196 tst                ping_idle_ping.py: using CellId 39681
08:32:03.540471 tst                ping_idle_ping.py: using BVCI 39682
08:32:03.565956 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
08:32:03.577231 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
08:32:03.588423 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
08:32:03.599385 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
08:32:03.610248 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
08:32:03.621070 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
08:32:03.632021 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
08:32:03.643117 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
08:32:03.931509 tst             ping_idle_ping.py:24: start network...
08:32:04.058219 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
08:32:04.539194 run         create_hlr_db(pid=28549): Launched
08:32:04.713662 bus                          /gobi_6: Setting Powered False
08:32:05.735313 run         create_hlr_db(pid=28549): Terminated: ok {rc=0}
08:32:06.169978 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28551): Launched
08:32:06.498892 run   osmo-hlr_10.42.42.2(pid=28552): Launched
08:32:06.622741 run              osmo-stp_10.42.42.5: Starting osmo-stp
08:32:07.190580 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28554): Launched
08:32:07.519590 run   osmo-stp_10.42.42.5(pid=28555): Launched
08:32:07.637897 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
08:32:08.207948 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28557): Launched
08:32:08.324406 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
08:32:08.611035 run              patchelf(pid=28558): Launched
08:32:08.801958 run   osmo-stp_10.42.42.5(pid=28555): ERR: Terminated: ERROR {rc=1}  [trial-2402↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28555)]
08:32:08.941382 run   osmo-stp_10.42.42.5(pid=28555): stdout: 
| (launched: 2022-12-14_08:32:07.356387)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
08:32:09.081114 run   osmo-stp_10.42.42.5(pid=28555): stderr: 
| �[0;m�[38;5;43m20221214083207554 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214083207554 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214083207554 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214083207555 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214083207555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214083207555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214083207555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
08:32:09.216865 run   osmo-stp_10.42.42.5(pid=28555): stdout: 
| (launched: 2022-12-14_08:32:07.356387)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
08:32:09.351141 run   osmo-stp_10.42.42.5(pid=28555): stderr: 
| �[0;m�[38;5;43m20221214083207554 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214083207554 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214083207554 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214083207555 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214083207555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214083207555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214083207555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
08:32:09.506634 run              patchelf(pid=28558): Terminating (SIGINT)
08:32:09.689148 run              patchelf(pid=28558): Terminated: ok {rc=0}
08:32:09.722058 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=28555): Process ended prematurely: osmo-stp_10.42.42.5(pid=28555) [trial-2402↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28555)]  [trial-2402↪gprs:sysmo↪ping_idle_ping.py:27]
08:32:09.731295 tst             ping_idle_ping.py:27: Test FAILED (6.7 sec)
08:32:09.794496 run   osmo-hlr_10.42.42.2(pid=28552): ERR: Terminated: ERROR {rc=237}  [trial-2402↪gprs:sysmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28552)]
08:32:09.846134 run   osmo-hlr_10.42.42.2(pid=28552): stdout: 
| (launched: 2022-12-14_08:32:06.335733) 
08:32:09.898376 run   osmo-hlr_10.42.42.2(pid=28552): stderr: 
| �[0;m�[1;31m20221214083206535 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214083206535 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214083206535 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214083206535 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214083206535 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214083206535 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214083206548 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:sysmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214083206557 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214083206557 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214083206557 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
08:32:09.942917 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28551): Terminating (SIGTERM)
08:32:09.985333 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28554): Terminating (SIGTERM)
08:32:10.027168 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28557): Terminating (SIGTERM)
08:32:10.036790 ---      ParallelTerminationStrategy: PID 28551 died...
08:32:10.092733 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28551): Terminated: ok {rc=0}
08:32:10.102958 ---      ParallelTerminationStrategy: PID 28554 died...
08:32:10.158951 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28554): Terminated: ok {rc=0}
08:32:10.168880 ---      ParallelTerminationStrategy: PID 28557 died...
08:32:10.225301 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28557): Terminated: ok {rc=0}
08:32:10.312597 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28555): Process ended prematurely: osmo-stp_10.42.42.5(pid=28555) [trial-2402↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28555)]