Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa.ping.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=922): Process ended prematurely: osmo-stp_10.42.42.5(pid=922) [trial-2402↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=922)]
Standard Output
---------------------------------------------- trial-2402 gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 09:24:16.593927 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:24:16.612938 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 09:24:16.841731 tst ping.py: using LAC 39958 09:24:16.994561 tst ping.py: using RAC 178 09:24:17.142494 tst ping.py: using CellId 39958 09:24:17.312405 tst ping.py: using BVCI 39959 09:24:17.344759 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:24:17.360492 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:24:17.377242 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:24:17.391725 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:24:17.405273 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:24:17.417897 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:24:17.431316 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:24:17.443788 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 09:24:17.745850 tst ping.py:19: start network... 09:24:17.881644 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:24:18.433433 run create_hlr_db(pid=916): Launched 09:24:18.624361 bus /gobi_6: Setting Powered False 09:24:19.642650 run create_hlr_db(pid=916): Terminated: ok {rc=0} 09:24:20.087244 run pcap-recorder_any(filters='host 10.42.42.2')(pid=918): Launched 09:24:20.510642 run osmo-hlr_10.42.42.2(pid=919): Launched 09:24:20.752915 run osmo-stp_10.42.42.5: Starting osmo-stp 09:24:21.329698 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=921): Launched 09:24:21.747465 run osmo-stp_10.42.42.5(pid=922): Launched 09:24:21.969504 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:24:22.547298 run pcap-recorder_any(filters='host 10.42.42.6')(pid=924): Launched 09:24:22.663525 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:24:22.963871 run patchelf(pid=925): Launched 09:24:23.155183 run osmo-stp_10.42.42.5(pid=922): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=922)] 09:24:23.296153 run osmo-stp_10.42.42.5(pid=922): stdout: | (launched: 2022-12-14_09:24:21.495490) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:24:23.435643 run osmo-stp_10.42.42.5(pid=922): stderr: | �[0;m�[38;5;43m20221214092421782 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214092421782 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214092421782 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214092421783 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214092421783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214092421783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214092421783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:24:23.574836 run osmo-stp_10.42.42.5(pid=922): stdout: | (launched: 2022-12-14_09:24:21.495490) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:24:23.711371 run osmo-stp_10.42.42.5(pid=922): stderr: | �[0;m�[38;5;43m20221214092421782 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214092421782 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214092421782 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214092421783 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214092421783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214092421783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214092421783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:24:23.869275 run patchelf(pid=925): Terminating (SIGINT) 09:24:24.052256 run patchelf(pid=925): Terminated: ok {rc=0} 09:24:24.087311 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=922): Process ended prematurely: osmo-stp_10.42.42.5(pid=922) [trial-2402↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=922)] [trial-2402↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22] 09:24:24.098403 tst ping.py:22: Test FAILED (7.5 sec) 09:24:24.163217 run osmo-hlr_10.42.42.2(pid=919): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=919)] 09:24:24.216330 run osmo-hlr_10.42.42.2(pid=919): stdout: | (launched: 2022-12-14_09:24:20.252486) 09:24:24.270861 run osmo-hlr_10.42.42.2(pid=919): stderr: | �[0;m�[1;31m20221214092420555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214092420555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214092420555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214092420555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214092420555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214092420555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214092420574 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214092420593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214092420593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214092420593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:24:24.317534 run pcap-recorder_any(filters='host 10.42.42.2')(pid=918): Terminating (SIGTERM) 09:24:24.363371 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=921): Terminating (SIGTERM) 09:24:24.409242 run pcap-recorder_any(filters='host 10.42.42.6')(pid=924): Terminating (SIGTERM) 09:24:24.419974 --- ParallelTerminationStrategy: PID 918 died... 09:24:24.482657 run pcap-recorder_any(filters='host 10.42.42.2')(pid=918): Terminated: ok {rc=0} 09:24:24.493731 --- ParallelTerminationStrategy: PID 921 died... 09:24:24.551630 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=921): Terminated: ok {rc=0} 09:24:24.563119 --- ParallelTerminationStrategy: PID 924 died... 09:24:24.620762 run pcap-recorder_any(filters='host 10.42.42.6')(pid=924): Terminated: ok {rc=0} 09:24:24.713770 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=922): Process ended prematurely: osmo-stp_10.42.42.5(pid=922) [trial-2402↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=922)]