Failed
gprs:trx-lms-limenet-micro.iperf3.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=459): Process ended prematurely: osmo-stp_10.42.42.5(pid=459) [trial-2402↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=459)]
Standard Output
---------------------------------------------- trial-2402 gprs:trx-lms-limenet-micro iperf3.py ---------------------------------------------- 09:21:48.401679 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:21:48.413155 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 09:21:48.546557 tst iperf3.py: using LAC 39946 09:21:48.664774 tst iperf3.py: using RAC 166 09:21:48.784412 tst iperf3.py: using CellId 39946 09:21:48.902243 tst iperf3.py: using BVCI 39947 09:21:48.925493 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:21:48.936352 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:21:48.947044 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:21:48.957637 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:21:48.968787 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:21:48.979864 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:21:48.991050 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:21:49.002033 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:21:49.013158 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 09:21:49.305620 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 09:21:49.440439 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:21:49.776558 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=451): Launched 09:21:50.054311 run iperf3-srv_10.42.42.10(pid=452): Launched 09:21:50.253017 tst iperf3.py:8: start network... 09:21:50.387772 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:21:50.905897 run create_hlr_db(pid=453): Launched 09:21:51.090738 bus /gobi_6: Setting Powered False 09:21:52.113072 run create_hlr_db(pid=453): Terminated: ok {rc=0} 09:21:52.516891 run pcap-recorder_any(filters='host 10.42.42.2')(pid=455): Launched 09:21:52.819087 run osmo-hlr_10.42.42.2(pid=456): Launched 09:21:52.929989 run osmo-stp_10.42.42.5: Starting osmo-stp 09:21:53.461909 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=458): Launched 09:21:53.787549 run osmo-stp_10.42.42.5(pid=459): Launched 09:21:53.904178 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:21:54.467881 run pcap-recorder_any(filters='host 10.42.42.6')(pid=461): Launched 09:21:54.582943 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:21:54.864510 run patchelf(pid=462): Launched 09:21:55.053239 run osmo-stp_10.42.42.5(pid=459): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=459)] 09:21:55.191201 run osmo-stp_10.42.42.5(pid=459): stdout: | (launched: 2022-12-14_09:21:53.626961) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:21:55.330685 run osmo-stp_10.42.42.5(pid=459): stderr: | �[0;m�[38;5;43m20221214092153815 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214092153815 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214092153815 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214092153816 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214092153816 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214092153816 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214092153816 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:21:55.464109 run osmo-stp_10.42.42.5(pid=459): stdout: | (launched: 2022-12-14_09:21:53.626961) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:21:55.596692 run osmo-stp_10.42.42.5(pid=459): stderr: | �[0;m�[38;5;43m20221214092153815 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214092153815 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214092153815 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214092153816 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214092153816 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214092153816 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214092153816 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:21:55.750687 run patchelf(pid=462): Terminating (SIGINT) 09:21:55.931077 run patchelf(pid=462): Terminated: ok {rc=0} 09:21:55.964146 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=459): Process ended prematurely: osmo-stp_10.42.42.5(pid=459) [trial-2402↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=459)] [trial-2402↪gprs:trx-lms-limenet-micro↪iperf3.py:8] 09:21:55.974158 tst iperf3.py:8: Test FAILED (7.6 sec) 09:21:56.036526 run osmo-hlr_10.42.42.2(pid=456): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:trx-lms-limenet-micro↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=456)] 09:21:56.087364 run osmo-hlr_10.42.42.2(pid=456): stdout: | (launched: 2022-12-14_09:21:52.670091) 09:21:56.139000 run osmo-hlr_10.42.42.2(pid=456): stderr: | �[0;m�[1;31m20221214092152842 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214092152842 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214092152842 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214092152842 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214092152843 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214092152843 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214092152856 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:trx-lms-limenet-micro/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214092152866 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214092152867 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214092152867 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:21:56.182705 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=451): Terminating (SIGTERM) 09:21:56.223744 run iperf3-srv_10.42.42.10(pid=452): Terminating (SIGTERM) 09:21:56.265001 run pcap-recorder_any(filters='host 10.42.42.2')(pid=455): Terminating (SIGTERM) 09:21:56.306382 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=458): Terminating (SIGTERM) 09:21:56.348017 run pcap-recorder_any(filters='host 10.42.42.6')(pid=461): Terminating (SIGTERM) 09:21:56.357890 --- ParallelTerminationStrategy: PID 451 died... 09:21:56.414237 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=451): Terminated: ok {rc=0} 09:21:56.424407 --- ParallelTerminationStrategy: PID 452 died... 09:21:56.479954 run iperf3-srv_10.42.42.10(pid=452): Terminated {rc=256} 09:21:56.490119 --- ParallelTerminationStrategy: PID 455 died... 09:21:56.545720 run pcap-recorder_any(filters='host 10.42.42.2')(pid=455): Terminated: ok {rc=0} 09:21:56.555891 --- ParallelTerminationStrategy: PID 458 died... 09:21:56.611384 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=458): Terminated: ok {rc=0} 09:21:56.621684 --- ParallelTerminationStrategy: PID 461 died... 09:21:56.676751 run pcap-recorder_any(filters='host 10.42.42.6')(pid=461): Terminated: ok {rc=0} 09:21:56.762698 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=459): Process ended prematurely: osmo-stp_10.42.42.5(pid=459) [trial-2402↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=459)]