Failed
gprs:trx-umtrx+mod-bts0-egprs.iperf3.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=31547): Process ended prematurely: osmo-stp_10.42.42.5(pid=31547) [trial-2402↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31547)]
Standard Output
---------------------------------------------- trial-2402 gprs:trx-umtrx+mod-bts0-egprs iperf3.py ---------------------------------------------- 09:06:06.830500 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:06:06.842764 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 09:06:06.990589 tst iperf3.py: using LAC 39862 09:06:07.110117 tst iperf3.py: using RAC 82 09:06:07.229770 tst iperf3.py: using CellId 39862 09:06:07.348752 tst iperf3.py: using BVCI 39863 09:06:07.372352 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:06:07.383586 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:06:07.394499 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:06:07.405573 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:06:07.416540 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:06:07.427486 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:06:07.438722 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:06:07.449590 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:06:07.460654 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:06:07.757624 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 09:06:07.894932 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:06:08.234963 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31539): Launched 09:06:08.518485 run iperf3-srv_10.42.42.10(pid=31540): Launched 09:06:08.719159 tst iperf3.py:8: start network... 09:06:08.856332 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:06:09.382147 run create_hlr_db(pid=31541): Launched 09:06:09.570154 bus /gobi_6: Setting Powered False 09:06:10.579363 run create_hlr_db(pid=31541): Terminated: ok {rc=0} 09:06:11.023938 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31543): Launched 09:06:11.353145 run osmo-hlr_10.42.42.2(pid=31544): Launched 09:06:11.476213 run osmo-stp_10.42.42.5: Starting osmo-stp 09:06:12.053983 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31546): Launched 09:06:12.382026 run osmo-stp_10.42.42.5(pid=31547): Launched 09:06:12.499641 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:06:13.068547 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31549): Launched 09:06:13.185814 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:06:13.470553 run patchelf(pid=31550): Launched 09:06:13.660922 run osmo-stp_10.42.42.5(pid=31547): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31547)] 09:06:13.800047 run osmo-stp_10.42.42.5(pid=31547): stdout: | (launched: 2022-12-14_09:06:12.220682) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:06:13.939202 run osmo-stp_10.42.42.5(pid=31547): stderr: | �[0;m�[38;5;43m20221214090612416 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214090612416 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214090612416 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214090612417 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214090612417 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214090612417 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214090612417 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:06:14.073660 run osmo-stp_10.42.42.5(pid=31547): stdout: | (launched: 2022-12-14_09:06:12.220682) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:06:14.206935 run osmo-stp_10.42.42.5(pid=31547): stderr: | �[0;m�[38;5;43m20221214090612416 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214090612416 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214090612416 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214090612417 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214090612417 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214090612417 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214090612417 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:06:14.362378 run patchelf(pid=31550): Terminating (SIGINT) 09:06:14.543866 run patchelf(pid=31550): Terminated: ok {rc=0} 09:06:14.577272 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=31547): Process ended prematurely: osmo-stp_10.42.42.5(pid=31547) [trial-2402↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31547)] [trial-2402↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8] 09:06:14.587187 tst iperf3.py:8: Test FAILED (7.8 sec) 09:06:14.649541 run osmo-hlr_10.42.42.2(pid=31544): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31544)] 09:06:14.700422 run osmo-hlr_10.42.42.2(pid=31544): stdout: | (launched: 2022-12-14_09:06:11.189930) 09:06:14.752016 run osmo-hlr_10.42.42.2(pid=31544): stderr: | �[0;m�[1;31m20221214090611389 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214090611389 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214090611389 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214090611389 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214090611389 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214090611389 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214090611401 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:trx-umtrx+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214090611411 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214090611411 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214090611411 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:06:14.796080 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31539): Terminating (SIGTERM) 09:06:14.837467 run iperf3-srv_10.42.42.10(pid=31540): Terminating (SIGTERM) 09:06:14.878945 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31543): Terminating (SIGTERM) 09:06:14.920218 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31546): Terminating (SIGTERM) 09:06:14.961806 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31549): Terminating (SIGTERM) 09:06:14.971461 --- ParallelTerminationStrategy: PID 31539 died... 09:06:15.027021 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31539): Terminated: ok {rc=0} 09:06:15.037258 --- ParallelTerminationStrategy: PID 31540 died... 09:06:15.092376 run iperf3-srv_10.42.42.10(pid=31540): Terminated {rc=256} 09:06:15.102351 --- ParallelTerminationStrategy: PID 31543 died... 09:06:15.157445 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31543): Terminated: ok {rc=0} 09:06:15.167397 --- ParallelTerminationStrategy: PID 31546 died... 09:06:15.222660 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31546): Terminated: ok {rc=0} 09:06:15.233125 --- ParallelTerminationStrategy: PID 31549 died... 09:06:15.288627 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31549): Terminated: ok {rc=0} 09:06:15.373785 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31547): Process ended prematurely: osmo-stp_10.42.42.5(pid=31547) [trial-2402↪gprs:trx-umtrx+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31547)]