Failed
gprs:nanobts+band-1900.iperf3.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=10879): Process ended prematurely: osmo-stp_10.42.42.5(pid=10879) [trial-2403↪gprs:nanobts+band-1900↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10879)]
Standard Output
---------------------------------------------- trial-2403 gprs:nanobts+band-1900 iperf3.py ---------------------------------------------- 10:56:26.899623 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:56:26.911355 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 10:56:27.039358 tst iperf3.py: using LAC 40445 10:56:27.163715 tst iperf3.py: using RAC 155 10:56:27.280728 tst iperf3.py: using CellId 40445 10:56:27.397969 tst iperf3.py: using BVCI 40446 10:56:27.421109 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:56:27.431875 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:56:27.442656 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:56:27.453093 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:56:27.464290 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:56:27.475232 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:56:27.486356 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:56:27.497342 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 10:56:27.508364 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 10:56:27.791861 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 10:56:27.916728 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:56:28.231750 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10871): Launched 10:56:28.492930 run iperf3-srv_10.42.42.10(pid=10872): Launched 10:56:28.676307 tst iperf3.py:8: start network... 10:56:28.801072 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:56:29.276599 run create_hlr_db(pid=10873): Launched 10:56:29.449561 bus /gobi_6: Setting Powered False 10:56:30.471055 run create_hlr_db(pid=10873): Terminated: ok {rc=0} 10:56:30.930708 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10875): Launched 10:56:31.412080 run osmo-hlr_10.42.42.2(pid=10876): Launched 10:56:31.612406 run osmo-stp_10.42.42.5: Starting osmo-stp 10:56:32.236872 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10878): Launched 10:56:32.562892 run osmo-stp_10.42.42.5(pid=10879): Launched 10:56:32.678458 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:56:33.243556 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10881): Launched 10:56:33.358530 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:56:33.641188 run patchelf(pid=10882): Launched 10:56:33.829961 run osmo-stp_10.42.42.5(pid=10879): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:nanobts+band-1900↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10879)] 10:56:33.967562 run osmo-stp_10.42.42.5(pid=10879): stdout: | (launched: 2022-12-14_10:56:32.402651) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:56:34.105834 run osmo-stp_10.42.42.5(pid=10879): stderr: | �[0;m�[38;5;43m20221214105632592 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214105632592 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214105632592 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214105632593 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214105632593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214105632593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214105632593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:56:34.239042 run osmo-stp_10.42.42.5(pid=10879): stdout: | (launched: 2022-12-14_10:56:32.402651) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:56:34.371441 run osmo-stp_10.42.42.5(pid=10879): stderr: | �[0;m�[38;5;43m20221214105632592 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214105632592 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214105632592 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214105632593 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214105632593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214105632593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214105632593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:56:34.526263 run patchelf(pid=10882): Terminating (SIGINT) 10:56:34.708057 run patchelf(pid=10882): Terminated: ok {rc=0} 10:56:34.741569 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=10879): Process ended prematurely: osmo-stp_10.42.42.5(pid=10879) [trial-2403↪gprs:nanobts+band-1900↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10879)] [trial-2403↪gprs:nanobts+band-1900↪iperf3.py:8] 10:56:34.751642 tst iperf3.py:8: Test FAILED (7.9 sec) 10:56:34.815177 run osmo-hlr_10.42.42.2(pid=10876): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:nanobts+band-1900↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10876)] 10:56:34.867683 run osmo-hlr_10.42.42.2(pid=10876): stdout: | (launched: 2022-12-14_10:56:31.100832) 10:56:34.920724 run osmo-hlr_10.42.42.2(pid=10876): stderr: | �[0;m�[1;31m20221214105631476 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214105631476 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214105631476 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214105631476 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214105631476 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214105631476 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214105631496 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:nanobts+band-1900/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214105631512 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214105631513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214105631513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:56:34.965206 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10871): Terminating (SIGTERM) 10:56:35.007172 run iperf3-srv_10.42.42.10(pid=10872): Terminating (SIGTERM) 10:56:35.049322 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10875): Terminating (SIGTERM) 10:56:35.091765 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10878): Terminating (SIGTERM) 10:56:35.134228 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10881): Terminating (SIGTERM) 10:56:35.143925 --- ParallelTerminationStrategy: PID 10871 died... 10:56:35.200230 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10871): Terminated: ok {rc=0} 10:56:35.210356 --- ParallelTerminationStrategy: PID 10872 died... 10:56:35.266218 run iperf3-srv_10.42.42.10(pid=10872): Terminated {rc=256} 10:56:35.276301 --- ParallelTerminationStrategy: PID 10875 died... 10:56:35.332395 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10875): Terminated: ok {rc=0} 10:56:35.342548 --- ParallelTerminationStrategy: PID 10878 died... 10:56:35.398477 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10878): Terminated: ok {rc=0} 10:56:35.408609 --- ParallelTerminationStrategy: PID 10881 died... 10:56:35.464741 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10881): Terminated: ok {rc=0} 10:56:35.551755 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10879): Process ended prematurely: osmo-stp_10.42.42.5(pid=10879) [trial-2403↪gprs:nanobts+band-1900↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10879)]