Failed
gprs:nanobts+band-900+mod-bts0-egprs.iperf3.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=11394): Process ended prematurely: osmo-stp_10.42.42.5(pid=11394) [trial-2403↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11394)]
Standard Output
---------------------------------------------- trial-2403 gprs:nanobts+band-900+mod-bts0-egprs iperf3.py ---------------------------------------------- 11:03:41.970015 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:03:41.982086 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 11:03:42.131243 tst iperf3.py: using LAC 40483 11:03:42.260858 tst iperf3.py: using RAC 193 11:03:42.390580 tst iperf3.py: using CellId 40483 11:03:42.518500 tst iperf3.py: using BVCI 40484 11:03:42.543850 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:03:42.555382 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:03:42.566680 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:03:42.577967 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:03:42.589184 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:03:42.600357 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:03:42.611807 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:03:42.622952 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:03:42.634338 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:03:42.932350 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 11:03:43.069662 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:03:43.410816 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11386): Launched 11:03:43.695807 run iperf3-srv_10.42.42.10(pid=11387): Launched 11:03:43.898570 tst iperf3.py:8: start network... 11:03:44.036150 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:03:44.562728 run create_hlr_db(pid=11388): Launched 11:03:44.752134 bus /gobi_6: Setting Powered False 11:03:45.774371 run create_hlr_db(pid=11388): Terminated: ok {rc=0} 11:03:46.253232 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11390): Launched 11:03:46.693414 run osmo-hlr_10.42.42.2(pid=11391): Launched 11:03:46.932787 run osmo-stp_10.42.42.5: Starting osmo-stp 11:03:47.511654 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11393): Launched 11:03:47.841809 run osmo-stp_10.42.42.5(pid=11394): Launched 11:03:47.961025 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:03:48.534281 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11396): Launched 11:03:48.651148 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:03:48.940363 run patchelf(pid=11397): Launched 11:03:49.132225 run osmo-stp_10.42.42.5(pid=11394): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11394)] 11:03:49.272486 run osmo-stp_10.42.42.5(pid=11394): stdout: | (launched: 2022-12-14_11:03:47.678424) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:03:49.413254 run osmo-stp_10.42.42.5(pid=11394): stderr: | �[0;m�[38;5;43m20221214110347869 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214110347869 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214110347870 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214110347870 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214110347870 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214110347871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214110347871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:03:49.548773 run osmo-stp_10.42.42.5(pid=11394): stdout: | (launched: 2022-12-14_11:03:47.678424) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:03:49.683436 run osmo-stp_10.42.42.5(pid=11394): stderr: | �[0;m�[38;5;43m20221214110347869 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214110347869 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214110347870 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214110347870 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214110347870 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214110347871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214110347871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:03:49.841777 run patchelf(pid=11397): Terminating (SIGINT) 11:03:50.026567 run patchelf(pid=11397): Terminated: ok {rc=0} 11:03:50.062834 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=11394): Process ended prematurely: osmo-stp_10.42.42.5(pid=11394) [trial-2403↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11394)] [trial-2403↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8] 11:03:50.073043 tst iperf3.py:8: Test FAILED (8.1 sec) 11:03:50.136750 run osmo-hlr_10.42.42.2(pid=11391): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11391)] 11:03:50.188682 run osmo-hlr_10.42.42.2(pid=11391): stdout: | (launched: 2022-12-14_11:03:46.426698) 11:03:50.241444 run osmo-hlr_10.42.42.2(pid=11391): stderr: | �[0;m�[1;31m20221214110346727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214110346728 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214110346728 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214110346728 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214110346728 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214110346728 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214110346747 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:nanobts+band-900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214110346760 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214110346760 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214110346760 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:03:50.286397 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11386): Terminating (SIGTERM) 11:03:50.328739 run iperf3-srv_10.42.42.10(pid=11387): Terminating (SIGTERM) 11:03:50.371470 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11390): Terminating (SIGTERM) 11:03:50.413975 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11393): Terminating (SIGTERM) 11:03:50.456404 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11396): Terminating (SIGTERM) 11:03:50.466336 --- ParallelTerminationStrategy: PID 11386 died... 11:03:50.522936 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11386): Terminated: ok {rc=0} 11:03:50.533205 --- ParallelTerminationStrategy: PID 11387 died... 11:03:50.589244 run iperf3-srv_10.42.42.10(pid=11387): Terminated {rc=256} 11:03:50.599509 --- ParallelTerminationStrategy: PID 11390 died... 11:03:50.655672 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11390): Terminated: ok {rc=0} 11:03:50.665979 --- ParallelTerminationStrategy: PID 11393 died... 11:03:50.722501 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11393): Terminated: ok {rc=0} 11:03:50.732828 --- ParallelTerminationStrategy: PID 11396 died... 11:03:50.789254 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11396): Terminated: ok {rc=0} 11:03:50.876735 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11394): Process ended prematurely: osmo-stp_10.42.42.5(pid=11394) [trial-2403↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11394)]