Failed
gprs:nanobts+band-900+mod-bts0-egprs.ping.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=11422): Process ended prematurely: osmo-stp_10.42.42.5(pid=11422) [trial-2403↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11422)]
Standard Output
---------------------------------------------- trial-2403 gprs:nanobts+band-900+mod-bts0-egprs ping.py ---------------------------------------------- 11:04:11.792073 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:04:11.804321 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 11:04:11.950348 tst ping.py: using LAC 40485 11:04:12.081969 tst ping.py: using RAC 195 11:04:12.206801 tst ping.py: using CellId 40485 11:04:12.333530 tst ping.py: using BVCI 40486 11:04:12.358284 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:04:12.369862 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:04:12.381194 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:04:12.392511 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:04:12.403861 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:04:12.415111 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:04:12.426622 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:04:12.437901 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:04:12.729403 tst ping.py:19: start network... 11:04:12.863436 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:04:13.376185 run create_hlr_db(pid=11416): Launched 11:04:13.562906 bus /gobi_6: Setting Powered False 11:04:14.584064 run create_hlr_db(pid=11416): Terminated: ok {rc=0} 11:04:14.991175 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11418): Launched 11:04:15.293278 run osmo-hlr_10.42.42.2(pid=11419): Launched 11:04:15.411541 run osmo-stp_10.42.42.5: Starting osmo-stp 11:04:15.983143 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11421): Launched 11:04:16.425017 run osmo-stp_10.42.42.5(pid=11422): Launched 11:04:16.756301 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:04:17.355539 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11424): Launched 11:04:17.465112 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:04:17.729631 run patchelf(pid=11425): Launched 11:04:17.906680 run osmo-stp_10.42.42.5(pid=11422): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11422)] 11:04:18.036698 run osmo-stp_10.42.42.5(pid=11422): stdout: | (launched: 2022-12-14_11:04:16.138994) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:04:18.166765 run osmo-stp_10.42.42.5(pid=11422): stderr: | �[0;m�[38;5;43m20221214110416499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214110416500 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214110416501 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214110416502 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214110416505 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214110416505 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214110416505 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:04:18.291440 run osmo-stp_10.42.42.5(pid=11422): stdout: | (launched: 2022-12-14_11:04:16.138994) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:04:18.414636 run osmo-stp_10.42.42.5(pid=11422): stderr: | �[0;m�[38;5;43m20221214110416499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214110416500 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214110416501 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214110416502 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214110416505 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214110416505 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214110416505 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:04:18.558718 run patchelf(pid=11425): Terminating (SIGINT) 11:04:18.727717 run patchelf(pid=11425): Terminated: ok {rc=0} 11:04:18.758590 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=11422): Process ended prematurely: osmo-stp_10.42.42.5(pid=11422) [trial-2403↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11422)] [trial-2403↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22] 11:04:18.767384 tst ping.py:22: Test FAILED (7.0 sec) 11:04:18.827843 run osmo-hlr_10.42.42.2(pid=11419): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11419)] 11:04:18.877041 run osmo-hlr_10.42.42.2(pid=11419): stdout: | (launched: 2022-12-14_11:04:15.143031) 11:04:18.926835 run osmo-hlr_10.42.42.2(pid=11419): stderr: | �[0;m�[1;31m20221214110415315 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214110415315 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214110415315 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214110415315 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214110415315 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214110415315 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214110415328 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:nanobts+band-900+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214110415337 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214110415338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214110415338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:04:18.969364 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11418): Terminating (SIGTERM) 11:04:19.009614 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11421): Terminating (SIGTERM) 11:04:19.049320 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11424): Terminating (SIGTERM) 11:04:19.058563 --- ParallelTerminationStrategy: PID 11418 died... 11:04:19.112088 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11418): Terminated: ok {rc=0} 11:04:19.121802 --- ParallelTerminationStrategy: PID 11421 died... 11:04:19.175082 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11421): Terminated: ok {rc=0} 11:04:19.184597 --- ParallelTerminationStrategy: PID 11424 died... 11:04:19.237798 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11424): Terminated: ok {rc=0} 11:04:19.325574 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11422): Process ended prematurely: osmo-stp_10.42.42.5(pid=11422) [trial-2403↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11422)]