Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-b200.ping_idle_ping.py (from gprs_trx-b200)

Failing for the past 218 builds (Since #2186 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=7240): Process ended prematurely: osmo-stp_10.42.42.5(pid=7240) [trial-2403↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7240)]

Standard Output

----------------------------------------------
trial-2403 gprs:trx-b200 ping_idle_ping.py
----------------------------------------------
10:15:54.764715 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:15:54.776391 tst                    gprs:trx-b200: Using 1 x bts (candidates: 1)
10:15:54.915351 tst                ping_idle_ping.py: using LAC 40230
10:15:55.035857 tst                ping_idle_ping.py: using RAC 195
10:15:55.156080 tst                ping_idle_ping.py: using CellId 40230
10:15:55.275216 tst                ping_idle_ping.py: using BVCI 40231
10:15:55.298484 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:15:55.309597 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:15:55.320215 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:15:55.330816 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:15:55.341700 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:15:55.352540 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:15:55.363623 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:15:55.374703 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
10:15:55.667784 tst             ping_idle_ping.py:24: start network...
10:15:55.801806 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:15:56.318606 run          create_hlr_db(pid=7234): Launched
10:15:56.505393 bus                          /gobi_6: Setting Powered False
10:15:57.526653 run          create_hlr_db(pid=7234): Terminated: ok {rc=0}
10:15:57.955732 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7236): Launched
10:15:58.278456 run    osmo-hlr_10.42.42.2(pid=7237): Launched
10:15:58.398016 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:15:58.959347 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7239): Launched
10:15:59.285084 run    osmo-stp_10.42.42.5(pid=7240): Launched
10:15:59.402397 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:15:59.965505 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7242): Launched
10:16:00.080023 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:16:00.361990 run               patchelf(pid=7243): Launched
10:16:00.550689 run    osmo-stp_10.42.42.5(pid=7240): ERR: Terminated: ERROR {rc=1}  [trial-2403↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7240)]
10:16:00.688417 run    osmo-stp_10.42.42.5(pid=7240): stdout: 
| (launched: 2022-12-14_10:15:59.123851)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:16:00.826659 run    osmo-stp_10.42.42.5(pid=7240): stderr: 
| �[0;m�[38;5;43m20221214101559315 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214101559315 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214101559315 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214101559316 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214101559316 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214101559316 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214101559316 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:16:00.982423 run    osmo-stp_10.42.42.5(pid=7240): stdout: 
| (launched: 2022-12-14_10:15:59.123851)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:16:01.114211 run    osmo-stp_10.42.42.5(pid=7240): stderr: 
| �[0;m�[38;5;43m20221214101559315 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214101559315 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214101559315 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214101559316 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214101559316 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214101559316 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214101559316 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:16:01.264516 run               patchelf(pid=7243): Terminating (SIGINT)
10:16:01.476107 run               patchelf(pid=7243): Terminated: ok {rc=0}
10:16:01.515097 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=7240): Process ended prematurely: osmo-stp_10.42.42.5(pid=7240) [trial-2403↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7240)]  [trial-2403↪gprs:trx-b200↪ping_idle_ping.py:27]
10:16:01.525703 tst             ping_idle_ping.py:27: Test FAILED (6.7 sec)
10:16:01.591816 run    osmo-hlr_10.42.42.2(pid=7237): ERR: Terminated: ERROR {rc=237}  [trial-2403↪gprs:trx-b200↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7237)]
10:16:01.644091 run    osmo-hlr_10.42.42.2(pid=7237): stdout: 
| (launched: 2022-12-14_10:15:58.119027) 
10:16:01.697861 run    osmo-hlr_10.42.42.2(pid=7237): stderr: 
| �[0;m�[1;31m20221214101558315 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214101558315 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214101558316 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214101558316 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214101558316 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214101558316 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214101558329 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:trx-b200/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214101558338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214101558339 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214101558339 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:16:01.743307 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7236): Terminating (SIGTERM)
10:16:01.787915 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7239): Terminating (SIGTERM)
10:16:01.832507 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7242): Terminating (SIGTERM)
10:16:01.844278 ---      ParallelTerminationStrategy: PID 7236 died...
10:16:01.903324 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7236): Terminated: ok {rc=0}
10:16:01.914732 ---      ParallelTerminationStrategy: PID 7239 died...
10:16:01.971170 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7239): Terminated: ok {rc=0}
10:16:01.981739 ---      ParallelTerminationStrategy: PID 7242 died...
10:16:02.040542 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7242): Terminated: ok {rc=0}
10:16:02.129329 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7240): Process ended prematurely: osmo-stp_10.42.42.5(pid=7240) [trial-2403↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7240)]