Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=8304): Process ended prematurely: osmo-stp_10.42.42.5(pid=8304) [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8304)]
Standard Output
---------------------------------------------- trial-2403 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 10:27:09.324397 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:27:09.336045 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:27:09.497318 tst iperf3.py: using LAC 40289 10:27:09.617417 tst iperf3.py: using RAC 254 10:27:09.739916 tst iperf3.py: using CellId 40289 10:27:09.860826 tst iperf3.py: using BVCI 40290 10:27:09.884282 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:27:09.895202 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:27:09.906008 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:27:09.916734 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:27:09.927858 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:27:09.939417 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:27:09.950719 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:27:09.961768 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:27:09.973066 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:27:10.254488 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 10:27:10.382839 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:27:10.702122 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8296): Launched 10:27:10.966695 run iperf3-srv_10.42.42.10(pid=8297): Launched 10:27:11.153503 tst iperf3.py:8: start network... 10:27:11.281531 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:27:11.764261 run create_hlr_db(pid=8298): Launched 10:27:11.941069 bus /gobi_6: Setting Powered False 10:27:12.962100 run create_hlr_db(pid=8298): Terminated: ok {rc=0} 10:27:13.397385 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8300): Launched 10:27:13.725934 run osmo-hlr_10.42.42.2(pid=8301): Launched 10:27:13.844506 run osmo-stp_10.42.42.5: Starting osmo-stp 10:27:14.413126 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8303): Launched 10:27:14.739514 run osmo-stp_10.42.42.5(pid=8304): Launched 10:27:14.857070 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:27:15.425872 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8306): Launched 10:27:15.541698 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:27:15.828662 run patchelf(pid=8307): Launched 10:27:16.033460 run osmo-stp_10.42.42.5(pid=8304): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8304)] 10:27:16.172839 run osmo-stp_10.42.42.5(pid=8304): stdout: | (launched: 2022-12-14_10:27:14.578793) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:27:16.310736 run osmo-stp_10.42.42.5(pid=8304): stderr: | �[0;m�[38;5;43m20221214102714769 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214102714769 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214102714770 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214102714770 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214102714770 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214102714771 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214102714771 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:27:16.443945 run osmo-stp_10.42.42.5(pid=8304): stdout: | (launched: 2022-12-14_10:27:14.578793) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:27:16.575050 run osmo-stp_10.42.42.5(pid=8304): stderr: | �[0;m�[38;5;43m20221214102714769 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214102714769 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214102714770 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214102714770 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214102714770 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214102714771 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214102714771 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:27:16.729769 run patchelf(pid=8307): Terminating (SIGINT) 10:27:16.909918 run patchelf(pid=8307): Terminated: ok {rc=0} 10:27:16.943403 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=8304): Process ended prematurely: osmo-stp_10.42.42.5(pid=8304) [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8304)] [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8] 10:27:16.954101 tst iperf3.py:8: Test FAILED (7.7 sec) 10:27:17.020015 run osmo-hlr_10.42.42.2(pid=8301): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8301)] 10:27:17.073088 run osmo-hlr_10.42.42.2(pid=8301): stdout: | (launched: 2022-12-14_10:27:13.563488) 10:27:17.126735 run osmo-hlr_10.42.42.2(pid=8301): stderr: | �[0;m�[1;31m20221214102713760 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214102713760 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214102713760 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214102713761 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214102713761 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214102713761 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214102713773 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214102713782 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214102713782 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214102713782 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:27:17.172670 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8296): Terminating (SIGTERM) 10:27:17.216332 run iperf3-srv_10.42.42.10(pid=8297): Terminating (SIGTERM) 10:27:17.259141 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8300): Terminating (SIGTERM) 10:27:17.305332 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8303): Terminating (SIGTERM) 10:27:17.347311 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8306): Terminating (SIGTERM) 10:27:17.356723 --- ParallelTerminationStrategy: PID 8296 died... 10:27:17.413198 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8296): Terminated: ok {rc=0} 10:27:17.423112 --- ParallelTerminationStrategy: PID 8297 died... 10:27:17.478441 run iperf3-srv_10.42.42.10(pid=8297): Terminated {rc=256} 10:27:17.488092 --- ParallelTerminationStrategy: PID 8300 died... 10:27:17.543692 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8300): Terminated: ok {rc=0} 10:27:17.553540 --- ParallelTerminationStrategy: PID 8303 died... 10:27:17.608777 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8303): Terminated: ok {rc=0} 10:27:17.618509 --- ParallelTerminationStrategy: PID 8306 died... 10:27:17.673570 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8306): Terminated: ok {rc=0} 10:27:17.763395 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8304): Process ended prematurely: osmo-stp_10.42.42.5(pid=8304) [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8304)]