Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=17569): Process ended prematurely: osmo-stp_10.42.42.5(pid=17569) [trial-2404↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17569)]
Standard Output
---------------------------------------------- trial-2404 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 11:42:34.726247 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:42:34.737081 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 11:42:34.885775 tst cs_paging_gprs_active.py: using LAC 40656 11:42:35.003984 tst cs_paging_gprs_active.py: using RAC 111 11:42:35.124555 tst cs_paging_gprs_active.py: using CellId 40656 11:42:35.244751 tst cs_paging_gprs_active.py: using BVCI 40657 11:42:35.268129 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:42:35.279031 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:42:35.289662 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:42:35.300128 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:42:35.311478 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:42:35.322502 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:42:35.333519 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:42:35.344229 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:42:35.355295 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:42:35.478125 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:42:35.778300 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:42:35.916013 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:42:36.258862 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17559): Launched 11:42:36.546706 run iperf3-srv_10.42.42.10(pid=17560): Launched 11:42:36.749476 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:42:36.887577 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:42:37.232210 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17561): Launched 11:42:37.518961 run iperf3-srv_10.42.42.10(pid=17562): Launched 11:42:37.720735 tst cs_paging_gprs_active.py:38: start network... 11:42:37.858181 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:42:38.387633 run create_hlr_db(pid=17563): Launched 11:42:38.578347 bus /gobi_6: Setting Powered False 11:42:39.598966 run create_hlr_db(pid=17563): Terminated: ok {rc=0} 11:42:40.023071 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17565): Launched 11:42:40.357833 run osmo-hlr_10.42.42.2(pid=17566): Launched 11:42:40.481223 run osmo-stp_10.42.42.5: Starting osmo-stp 11:42:41.055634 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17568): Launched 11:42:41.387107 run osmo-stp_10.42.42.5(pid=17569): Launched 11:42:41.506569 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:42:42.083454 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17571): Launched 11:42:42.200912 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:42:42.490678 run patchelf(pid=17572): Launched 11:42:42.683041 run osmo-stp_10.42.42.5(pid=17569): ERR: Terminated: ERROR {rc=1} [trial-2404↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17569)] 11:42:42.824079 run osmo-stp_10.42.42.5(pid=17569): stdout: | (launched: 2022-12-14_11:42:41.223476) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:42:42.965824 run osmo-stp_10.42.42.5(pid=17569): stderr: | �[0;m�[38;5;43m20221214114241418 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214114241418 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214114241418 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214114241419 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214114241419 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214114241419 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214114241419 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:42:43.102206 run osmo-stp_10.42.42.5(pid=17569): stdout: | (launched: 2022-12-14_11:42:41.223476) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:42:43.237130 run osmo-stp_10.42.42.5(pid=17569): stderr: | �[0;m�[38;5;43m20221214114241418 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214114241418 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214114241418 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214114241419 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214114241419 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214114241419 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214114241419 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:42:43.394653 run patchelf(pid=17572): Terminating (SIGINT) 11:42:43.578788 run patchelf(pid=17572): Terminated: ok {rc=0} 11:42:43.612811 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=17569): Process ended prematurely: osmo-stp_10.42.42.5(pid=17569) [trial-2404↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17569)] [trial-2404↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 11:42:43.622714 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 11:42:43.685442 run osmo-hlr_10.42.42.2(pid=17566): ERR: Terminated: ERROR {rc=237} [trial-2404↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17566)] 11:42:43.736634 run osmo-hlr_10.42.42.2(pid=17566): stdout: | (launched: 2022-12-14_11:42:40.191632) 11:42:43.788486 run osmo-hlr_10.42.42.2(pid=17566): stderr: | �[0;m�[1;31m20221214114240391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214114240391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214114240391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214114240391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214114240391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214114240391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214114240404 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214114240414 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214114240415 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214114240415 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:42:43.832737 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17559): Terminating (SIGTERM) 11:42:43.875571 run iperf3-srv_10.42.42.10(pid=17560): Terminating (SIGTERM) 11:42:43.917577 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17561): Terminating (SIGTERM) 11:42:43.959851 run iperf3-srv_10.42.42.10(pid=17562): Terminating (SIGTERM) 11:42:44.001812 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17565): Terminating (SIGTERM) 11:42:44.044116 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17568): Terminating (SIGTERM) 11:42:44.086012 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17571): Terminating (SIGTERM) 11:42:44.095538 --- ParallelTerminationStrategy: PID 17559 died... 11:42:44.151413 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17559): Terminated: ok {rc=0} 11:42:44.161368 --- ParallelTerminationStrategy: PID 17560 died... 11:42:44.216666 run iperf3-srv_10.42.42.10(pid=17560): Terminated {rc=256} 11:42:44.226528 --- ParallelTerminationStrategy: PID 17561 died... 11:42:44.281906 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17561): Terminated: ok {rc=0} 11:42:44.291792 --- ParallelTerminationStrategy: PID 17562 died... 11:42:44.347844 run iperf3-srv_10.42.42.10(pid=17562): Terminated {rc=256} 11:42:44.357811 --- ParallelTerminationStrategy: PID 17565 died... 11:42:44.413431 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17565): Terminated: ok {rc=0} 11:42:44.423394 --- ParallelTerminationStrategy: PID 17568 died... 11:42:44.479271 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17568): Terminated: ok {rc=0} 11:42:44.489368 --- ParallelTerminationStrategy: PID 17571 died... 11:42:44.544639 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17571): Terminated: ok {rc=0} 11:42:44.631406 bus /gobi_0: Setting Powered False 11:42:45.736475 bus /gobi_0: Setting Powered False 11:42:46.868168 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17569): Process ended prematurely: osmo-stp_10.42.42.5(pid=17569) [trial-2404↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17569)]