Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=18239): Process ended prematurely: osmo-stp_10.42.42.5(pid=18239) [trial-2404↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18239)]
Standard Output
---------------------------------------------- trial-2404 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 11:52:15.386231 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:52:15.397724 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 11:52:15.539211 tst cs_paging_gprs_active.py: using LAC 40707 11:52:15.660919 tst cs_paging_gprs_active.py: using RAC 162 11:52:15.782629 tst cs_paging_gprs_active.py: using CellId 40707 11:52:15.919405 tst cs_paging_gprs_active.py: using BVCI 40708 11:52:15.944296 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:52:15.956681 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:52:15.968790 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:52:15.980858 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:52:15.994311 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:52:16.007573 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:52:16.021765 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:52:16.036825 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:52:16.051571 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 11:52:16.192310 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 11:52:16.499798 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:52:16.642420 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:52:17.005249 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18229): Launched 11:52:17.301642 run iperf3-srv_10.42.42.10(pid=18230): Launched 11:52:17.489301 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:52:17.617644 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:52:17.938153 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18231): Launched 11:52:18.206038 run iperf3-srv_10.42.42.10(pid=18232): Launched 11:52:18.393225 tst cs_paging_gprs_active.py:38: start network... 11:52:18.521394 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:52:19.008824 run create_hlr_db(pid=18233): Launched 11:52:19.185372 bus /gobi_6: Setting Powered False 11:52:20.207780 run create_hlr_db(pid=18233): Terminated: ok {rc=0} 11:52:20.619363 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18235): Launched 11:52:20.927575 run osmo-hlr_10.42.42.2(pid=18236): Launched 11:52:21.045075 run osmo-stp_10.42.42.5: Starting osmo-stp 11:52:21.578318 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18238): Launched 11:52:21.886573 run osmo-stp_10.42.42.5(pid=18239): Launched 11:52:21.999048 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:52:22.535728 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18241): Launched 11:52:22.645491 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:52:22.922373 run patchelf(pid=18242): Launched 11:52:23.115829 run osmo-stp_10.42.42.5(pid=18239): ERR: Terminated: ERROR {rc=1} [trial-2404↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18239)] 11:52:23.257654 run osmo-stp_10.42.42.5(pid=18239): stdout: | (launched: 2022-12-14_11:52:21.733914) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:52:23.399713 run osmo-stp_10.42.42.5(pid=18239): stderr: | �[0;m�[38;5;43m20221214115221902 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214115221902 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214115221903 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214115221903 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214115221903 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214115221903 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214115221904 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:52:23.536784 run osmo-stp_10.42.42.5(pid=18239): stdout: | (launched: 2022-12-14_11:52:21.733914) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:52:23.673050 run osmo-stp_10.42.42.5(pid=18239): stderr: | �[0;m�[38;5;43m20221214115221902 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214115221902 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214115221903 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214115221903 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214115221903 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214115221903 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214115221904 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:52:23.831037 run patchelf(pid=18242): Terminating (SIGINT) 11:52:24.016084 run patchelf(pid=18242): Terminated: ok {rc=0} 11:52:24.050068 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18239): Process ended prematurely: osmo-stp_10.42.42.5(pid=18239) [trial-2404↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18239)] [trial-2404↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 11:52:24.060155 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 11:52:24.124108 run osmo-hlr_10.42.42.2(pid=18236): ERR: Terminated: ERROR {rc=237} [trial-2404↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18236)] 11:52:24.177041 run osmo-hlr_10.42.42.2(pid=18236): stdout: | (launched: 2022-12-14_11:52:20.775201) 11:52:24.229798 run osmo-hlr_10.42.42.2(pid=18236): stderr: | �[0;m�[1;31m20221214115220949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214115220949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214115220949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214115220949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214115220949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214115220949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214115220962 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214115220970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214115220970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214115220970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:52:24.275026 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18229): Terminating (SIGTERM) 11:52:24.318046 run iperf3-srv_10.42.42.10(pid=18230): Terminating (SIGTERM) 11:52:24.360610 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18231): Terminating (SIGTERM) 11:52:24.404028 run iperf3-srv_10.42.42.10(pid=18232): Terminating (SIGTERM) 11:52:24.446980 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18235): Terminating (SIGTERM) 11:52:24.489475 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18238): Terminating (SIGTERM) 11:52:24.531746 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18241): Terminating (SIGTERM) 11:52:24.541554 --- ParallelTerminationStrategy: PID 18229 died... 11:52:24.598570 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18229): Terminated: ok {rc=0} 11:52:24.608826 --- ParallelTerminationStrategy: PID 18230 died... 11:52:24.665248 run iperf3-srv_10.42.42.10(pid=18230): Terminated {rc=256} 11:52:24.675389 --- ParallelTerminationStrategy: PID 18231 died... 11:52:24.731768 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18231): Terminated: ok {rc=0} 11:52:24.742026 --- ParallelTerminationStrategy: PID 18232 died... 11:52:24.798078 run iperf3-srv_10.42.42.10(pid=18232): Terminated {rc=256} 11:52:24.808057 --- ParallelTerminationStrategy: PID 18235 died... 11:52:24.864222 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18235): Terminated: ok {rc=0} 11:52:24.874325 --- ParallelTerminationStrategy: PID 18238 died... 11:52:24.931095 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18238): Terminated: ok {rc=0} 11:52:24.941266 --- ParallelTerminationStrategy: PID 18241 died... 11:52:24.997537 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18241): Terminated: ok {rc=0} 11:52:25.085572 bus /gobi_0: Setting Powered False 11:52:26.194865 bus /gobi_0: Setting Powered False 11:52:27.304157 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18239): Process ended prematurely: osmo-stp_10.42.42.5(pid=18239) [trial-2404↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18239)]